1997 AUDI A4 Central Locking System Workshop Manual

57-47

Rear lid lock actuator, removing and
installing


Removing

- Separate harness connector and detach vacuum line.
- Disengage operating rod -4- from clip -3-.
- Remove hex nuts -6- and remove lock actuator -7- from rear lid lock.

- Push out retaining pin -3- (2x) remove expanding clip.
- Push clip -4- back and disconnect.
- Remove lock actuator -1- from rear lid lock.
Pa
ge 9 of 11 Central lockin
g system
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.57.8

57-48

Installing

- Set lock cylinders in "open" position.

- Push ridged plate -1- to left. The first ridge of the plate -1- must snap
into the first groove on the grooved segment -2-.
Pa
ge 10 of 11 Central lockin
g system
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.57.8

57-49

Central locking system pump, removing
and installing

The pump for the central locking system is
located in the right-rear of the luggage
compartment under the luggage compartment
trim.

- Fold back luggage compartment trim and remove insulation -3- with
pump for central locking system -1-.
- Disengage connecting line -2-.

CAUTION!
After disconnecting all three connectors from the central locking
system pump, ensure that the middle 6-pin connector (for power
supply) is always plugged in last. - Open insulation, disengage electrical harness connectors and remove
connector -2- for vacuum line.
Pa
ge 11 of 11 Central lockin
g system
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.57.8