15-56
- Install toothed belt (adjust valve timing) Page
13
-44
.
Note:
Observe all instructions on removing and
installing the toothed belt Page 13
-40
.
Tightening torque
Component
Nm
Camshaft sprocket to camshaft 65
Pa
ge 20 of 58 Valve
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2
15-72
Note:
When turning the camshaft the crankshaft must not be at TDC. There is a
danger of damage to the valves/piston crown.
Note: - Align markings on camshaft sprocket with marking on cylinder head
cover.
- Align marking on vibration damper with marking on lower part of
toothed belt guard.
- Install toothed belt (adjust valve timing) Page 13
-44
.
Observe all instructions on removing and installing the toothed belt
Page 13
-40
.
Wait about 30 minutes after installing the camshafts before starting
the engine. Hydraulic valve compensation elements have to settle
(otherwise valves will strike pistons). After working on the valve gear, turn the engine carefully at least 2
rotations to ensure that none of the valves make contact when the
starter is operated.
Pa
ge 37 of 58 Valve
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2
