1997 AUDI A4 01V Transmission Remove And Install Workshop Manual

37-125


Right and left transmission mounts,
removing and installing

Special Tools and equipment

Engine/transmission support VAG1383A
engine/gearbox jack
3282 transmission support
3282/19 adjustment plate
Pa
ge 57 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2

37-126

Removing

Note:
Transmission must be supported as indicated
when both transmission supports are removed.
Transmission does not need to be supported this
way when only one of the transmission supports
is being removed.

Note:
The symbols on the adjustment plate indicate the necessary mounts for
Automatic Transmission 01V and the arrow points toward front of vehicle. - Prepare 3282 transmission support for Automatic Transmission 01V
with3282/10 adjustment plate and place it on the VAG1383A
engine/transmission hoist.

Note:
If 3282 transmission support is not available, transmission can be
supported using the VAG1383A transmission lift and the 1359/2 universal
mount. - Roll VAG1383A engine/transmission hoist with 3282 transmission
support under transmission and support transmission.
Pa
ge 58 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2

37-127

Right transmission support

Note:
The right heat shield is not installed on 6 cylinder TDI engines.
Left transmission support - Remove heat shield -C-.
- Remove right heat shield -D- by removing bolts -A- from transmission.

Note:
The left heat shield is not installed on 4 cylinder gasoline engines. - Remove heat shield -C-.
- Remove left heat shield -D- by removing bolts -A- from transmission.
Pa
ge 59 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2

37-128

Left and right transmission supports

D - transmission mount (traditional)
H- hydraulic transmission mount
Note:
Items -C- and -B- are not installed on vehicles with hydraulic transmission
bearing -H-, because bolt -G- is threaded directly into the transmission
bearing.
Installing
Installation is the reverse of removal.
Tightening torques for left and right transmission supports - Remove transmission supports -E-.Item no.
Bolt
Number
Nm
A M 8 x 22 2 each 27
B to F M 10 x 70 1 50
G M 10 x 35 1 50
Pa
ge 60 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2

37-129


Tightening torques for left transmission support Item no.
Bolt
Number
Nm
A M 10 x 30
M 10 x 50 2
1 40
B M 6 x 22 3 10

Tightening torques for right transmission support Item no.
Bolt
Number
Nm
A M 10 x 30 3 40
B M 6 x 22 3 10
Pa
ge 61 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2

37-130

Automatic transmission, transporting


Special tools and equipment

The 3457 attachment and holding rig can be used when transporting the
transmission and for setting up the 3282 transmission support.
3457 attachment and holding rig

- Attach the 3457 attachment and holding rig at the transmission housing
mounts and secure.
Pa
ge 62 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2

37-131


Transmission, attaching to assembly
stand

Special Tools and equipment

3457 attachment and holding rig
VW540 holding fixture (only for transmission
with FWD)
VW313 holding fixture
VW309 holding plate
VAG1202A engine hoist
Pa
ge 63 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2

37-132


For transmissions with Front Wheel Drive (FWD), the VW540 holding
fixture can also be used to secure the transmission to the VW313 holding
fixture. - Attach the 3457 attachment and holding rig at the transmission housing
mounts and secure.
- Bolt the attachment and holding rig to the VW 309 holding plate and
place this into the VW313 holding fixture using a workshop crane.

WARNING!
The center of gravity of the transmission is located outside the
turning center at holding fixture. To turn the transmission, a second
technician must hold the transmission housing to prevent back-
swing.
Note:
Vents for the transmission housing and final drive must be closed before
turning a filled transmission on the assembly stand so that the oil pan
faces upward . - Secure transmission to VW540 holding fixture (arrows) and insert in
VW313 holding fixture.
Pa
ge 64 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2