30-5
Clutch pedal and over-center spring,
removing and installing
Removing
- Remove driver's side storage compartment Repair Manual, Body
Interior, Repair Group 68
- If installed, remove switch above clutch pedal.
- Unclip pin and locking plate using screwdriver (arrow -1-), remove pin
and locking plate (arrow -2-), and detach clutch pedal from clutch
master cylinder.
- Press locking clip for clutch pedal off pivot pin using screwdriver.
- Remove bolt (arrow).
- Press clutch and brake pedal pivot pin out toward right, until clutch
pedal can be removed.
- If necessary, press locking clip for brake pedal off pivot pin using
screwdriver.
- Remove clutch pedal and over-center spring.
Pa
ge 6 of 22 Clutch mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.30.1
30-9
Clutch Pedal Position (CPP) switch -
F194-, adjusting
- Loosen two bolts slightly (arrows).
- Have second technician fully depress clutch pedal up to stop.
- Place feeler gauge -A- with specific dimension -a- 3.2 mm (0.126 in.)
between operating surface of clutch pedal and switch cam.
Thickness -a- of feeler gauge: 3.2 mm (0.126 in.)
- Move switch -B- toward gauge -A- until stop, and tighten two mounting
bolts (arrows) to 8 Nm (71 in. lb).
Pa
ge 10 of 22 Clutch mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.30.1
