30-13
Clutch master cylinder, removing and
installing
Special tools and equipment
3094 hose clamp
Removing
CAUTION!
Before working on the electrical system:
Determine the correct coding for the anti-
theft radio.
Switch the ignition off (also applies when
connecting the battery). Failure to do so may
damage the Engine Control Module (ECM).
Disconnect the battery Ground (GND)
strap.
To remove E-box from plenum chamber:
- Remove bolts (arrows) and remove cover.
- Remove Engine Control Module (ECM); if necessary remove 8-pin
relay support Repair Manual, Electrical Equipment, Repair Group 97- Disconnect harness connectors at connector station.
Pa
ge 14 of 22 Clutch mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.30.1
