1996 TOYOTA TERCEL window

BO344-01
N15579
Back Window GlassBack Window Moulding
Package Tray Trim
High Mounted Stop Light Package Tray Trim Side Cover
Rear Seat Cushion
Rear Seatback Roof Side Inner Garnish
Quarter Trim Board
BO-42
- BODYBACK WINDOW GLASS
1136 Author
: Date
:
1996 TERCEL (RM440U)
BACK WINDOW GLASS
COMPONENTS

BO345-01
N12301
- BODYBACK WINDOW GLASS
BO-43
1996 TERCEL (RM440U)
REMOVAL
1. DISCONNECT DEFOGGER CONNECTOR
2. REMOVE REAR SEAT CUSHION AND SEATBACK
3. REMOVE REAR SEAT BELT
4. REMOVE FRONT DOOR SCUFF PLATE
5. REMOVE QUARTER TRIM BOARD
6. REMOVE FRONT SEAT BELT
7. REMOVE HIGH MOUNTED STOP LIGHT
8. REMOVE PACKAGE TRAY GARNISH
9. REMOVE BACK WINDOW MOULDING
Using a knife, cut off the body.
NOTICE:
Do not damage the body with the knife.
10. REMOVE BACK WINDOW GLASS
Remove the glass in the same manner as windshield (See page
BO-34).

BO346-01
N12302
BO-44
- BODYBACK WINDOW GLASS
1996 TERCEL (RM440U)
INSTALLATION
1. CLEAN AND SHAPE CONTACT SURFACE OF BODY
(See page BO-35)
2. CLEAN REMOVED GLASS (See page BO-35)
3. POSITION GLASS (See page BO-35)
4. CLEAN CONTACT SURFACE GLASS (See page
BO-35)
5. COAT CONTACT SURFACE OF BODY WITH PRIMER
ºMº (See page BO-35)
6. COAT CONTACT SURFACE OF GLASS WITH PRIMER
ºGº (See page BO-35)
7. MIX ADHESIVE COATING (See page BO-35)
8. APPLY ADHESIVE (See page BO-35)
9. INSTALL GLASS (See page BO-35)
10. INSTALL BACK WINDOW MOULDING
Place the moulding onto the body and tap it by hand.
11. INSPECT FOR LEAKS AND REPAIR (See page
BO-35)
12. INSTALL PACKAGE TRAY GARNISH
13. INSTALL HIGH MOUNTED STOP LIGHT
14. INSTALL FRONT SEAT OUTER BELT
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
15. INSTALL QUARTER TRIM BOARD
16. INSTALL FRONT DOOR SUCFF PLATE
17. INSTALL REAR SEAT OUTER BELT
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
18. INSTALL REAR SEATBACK
Torque: 18 N´m (185 kgf´cm, 13 ft´lbf)
19. INSTALL REAR SEAT CUSHION
20. CONNECT DEFOGGER CONNECTOR