N13109
Relay Block No.7
POWER M-Fuse
1
- DIAGNOSTICSPOWER DOOR LOCK CONTROL SYSTEM
DI-201
1996 TERCEL (RM440U)
INSPECTION PROCEDURE
1 Check POWER M-fuse.
PREPARATION:
(a) Remove the finish low center panel.
(b) Remove the POWER M-fuse from R/B No.7.
CHECK:
Check continuity of POWER M-fuse.
OK:
Continuity
NG Check for short in all the harness and compo-
nents connected to the POWER M-fuse
(See attached wiring diagram). *1
OK
N12877N14677I09780
Instrument Panel Junction Block
CIG & RAD
BE4061I05896I09781
ON
IG
(+) (-)
Disconnect
DI-238
- DIAGNOSTICSTHEFT DETERRENT SYSTEM
1996 TERCEL (RM440U)
INSPECTION PROCEDURE
1 Check CIG / RAD fuses.
PREPARATION:
(a) Remove the fuse box cover.
(b) Remove CIG & RAD fuse from instrument panel junction
block.
CHECK:
Check continuity of CIG & RAD fuses.
OK:
Continuity
NG Check for short in all the harness and compo-
nents connected to the CIG & RAD fuse (See at-
tached wiring diagram).
OK
2 Check voltage between terminals ACC of theft deterrent ECU and body ground.
PREPARATION:
(a) Disconnect the theft deterrent ECU connectors.
(b) Turn ignition switch ON.
CHECK:
Measure voltage between terminals ACC of theft deterrent
ECU connector and body ground.
OK:
Voltage: 10 - 14 V
OK Check and replace theft deterrent ECU.
NG
Check and repair harness and connector between theft deterrent ECU and battery
(See page IN-26).
