Z11183
BE0044
Ignition
Switch
BatteryWarning Light
BE1428
ON
OFF
Z17684
Ignition
Switch
BatteryWarning Light
Wire Harness Side
N20834
OFF
ON BE-42
- BODY ELECTRICALCOMBINATION METER
1996 TERCEL (RM440U)
13. INSPECT PARKING BRAKE SWITCH CONTINUITY
(a) Check that there is continuity between terminal and
switch body with the switch ON (switch pin released).
(b) Check that there is no continuity between terminal and
switch body with the switch OFF (switch pin pushed in).
If operation is not as specified, replace the switch or inspect
ground point.
14. INSPECT OPEN DOOR WARNING LIGHT
(a) Disconnect the connectors from the door courtesy switch
and ground terminal on the wire harness side connector.
(b) Turn the ignition switch ON, check that the warning light
lights up.
If the warning light does not light up, test the bulb.
15. INSPECT OPEN DOOR COURTESY SWITCH
CONTINUITY
(a) Check that there is continuity between terminals and the
switch body with the switch ON (switch pin released:
opened door).
(b) Check that there is no continuity between terminals and
the switch body with the switch OFF (switch pin pushed
in: closed doors).
If operation is not as specified, replace the switch.
16. INSPECT SEAT BELT WARNING LIGHT
(a) Disconnect the connector from the driver's seat belt re-
tractor assembly.
(b) Connect terminals 1 and 2 on the wire harness side con-
nector.
(c) Turn the ignition switch ON, and check that the warning
light lights up.
If the warning light does not light up, test the bulb.
17. INSPECT SEAT BELT RETRACTOR SWITCH
CONTINUITY
(a) Check that there is continuity between terminals on the
switch side connector with the switch ON (belt down-
ward).
(b) Check that there is continuity between terminals on the
switch side connector with the switch OFF (belt upward).
If continuity is not as specified, replace the retractor assembly.
