Page 1065 of 1202
V08178
POWER COMING IN, BUT TAPE PLAYER NOT OPERATING 10
Tape Player
U: Radio - Tape Player Unit
Cassette tape faulty.
Functions OK if different cassette tape inserted?
U Radio assembly faulty. Is radio operating normally?
Speaker wire harness faulty. Is there continuity in speaker wire harness?
Speaker faulty.
Temporarily install another speaker. Functions OK?
U Radio assembly faulty.Ye s
No
NoYe s
No
Ye s Ye s
No
EITHER SPEAKER DOES NOT WORK 11
Tape Player
U: Radio - Tape Player Unit
U Radio assembly faulty. Is radio operating normally?
Is hiss produced by non-functioning speaker?
Speaker wire harness faulty. Is there continuity in speaker wire harness?
Speaker faulty. Temporarily install another speaker.
Functions OK?U Radio assembly faulty.
U Radio assembly faulty.Ye s
No
NoYe s
No
Ye s Ye s
No BE-64
- BODY ELECTRICALAUDIO SYSTEM
1996 TERCEL (RM440U)
Page 1066 of 1202
V08179
SOUND QUALITY POOR (VOLUME FAINT) 12
Tape Player
U : Radio - Tape Player Unit
Function OK if different cassette tape
inserted?Cassette tape faulty.
Operates normally after cleaning the head?
(See page BE-53)Head dirty.
Is radio operating normally? U Radio assembly faulty.
Is speaker properly installed?Install properly.
Temporarily install another speaker.
Functions OK?Speaker faulty.
U Radio assembly faulty.Ye s
No
NoYe s
Ye s
No
No
Ye s Ye s
No
TAPE JAMMED, MALFUNCTION WITH TAPE SPEED OR AUTO-REVERSE 13
Tape Player
U: Radio - Tape Player Unit
Function OK if different tape (less than 120
mins) is inserted?Cassette tape faulty.
Is there a foreign object inside tape player?
Remove foreign object.
Operates normally after cleaning the head?
(See page BE-53)Head dirty.
U Radio assembly faulty.NoYe s
Ye s
Ye s No
No
- BODY ELECTRICALAUDIO SYSTEM
BE-65
1996 TERCEL (RM440U)
Page 1067 of 1202
V08180
CASSETTE TAPE WILL NOT EJECT 15
Tape Player
U: Radio - Tape Player UnitAPS, SKIP, RPT BUTTONS NOT OPERATING 14
Tape Player
Functions OK if different cassette tape inserted?Radio assembly faulty.
Cassette tape faulty [Less than 3 secs. of silence between songs (APS, RPT). Less then 15 secs. of silence (SKIP).]
Is tape player operating normally? Cassette tape jammed.
Is auto search button of radio operating normally?Radio assembly faulty.
Check if CIG & RAD fuse is OK. Replace fuse.
Is +B applied to radio assembly? +B wire harness faulty.
Radio assembly faulty.Ye sNo
No
Ye s
Ye s
No
OKNG
No
Ye s BE-66
- BODY ELECTRICALAUDIO SYSTEM
1996 TERCEL (RM440U)
Page 1068 of 1202
- BODY ELECTRICALAUDIO SYSTEM
BE-67
1996 TERCEL (RM440U)
Page 1069 of 1202
BE-68
- BODY ELECTRICALAUDIO SYSTEM
1996 TERCEL (RM440U)
Page 1070 of 1202
- BODY ELECTRICALAUDIO SYSTEM
BE-69
1996 TERCEL (RM440U)
Page 1071 of 1202
BE-70
- BODY ELECTRICALAUDIO SYSTEM
1996 TERCEL (RM440U)
Page 1138 of 1202

N14519
Drain Hose
- AIR CONDITIONINGAIR CONDITIONING SYSTEM
AC-9
1996 TERCEL (RM440U)
3. INSPECT IDLE-UP SPEED
(a) Warm up engine.
(b) Inspect idle-up speed when the these conditions are es-
tablished.
Test conditions:
Blower speed control switch HI
Electrical lood OFF
A/C switch ON
Put gear shift in neutral
Standard idle-up speed: 800 - 900 rpm
If idle speed is not as specified, check the IAC valve and air in-
take system.
4. INSPECT FOR LEAKAGE OF REFRIGERANT
(a) Perform in these conditions:
Stop engine.
Secure good ventilation (If the gas leak detector
may not react to volatile gases which are not refrig-
erant, such as evaporated gasoline and exhaust
gas.)
Repeat the test 2 or 3 times.
Make sure that there is some refrigerant remaining
in the refrigeration system.
When compressor is OFF: approx. 392 - 588 kPa
(4 - 6 kgf/ cm
2, 57 - 85 psi)
(b) Bring the gas leak detector close to the drain hose before
performing the test.
HINT:
After the blower motor has stopped, leave the cooling unit
for more than 15 minutes.
Expose the gas leak detector sensor under the drain
hose.
When bring the gas leak detector close to the drain hose,
make sure that the gas leak detector does not react to the
volatile gases.
If such reaction is unavoidable, the vehicle must be lifted up.
(c) If gas leak is not detected on the drain hose, remove the
power transistor from the cooling unit. Then insert the gas
leak detector sensor into the unit and perform the test.
(d) Disconnect the connector and leave the pressure switch
for approx. 20 minutes. Then bring the gas leak detector
close to the pressure switch and perform the test.
(e) Bring the gas leak detector close to the refrigerant lines
and perform the test.