Page 1008 of 1202
- BODY ELECTRICALBODY ELECTRICAL SYSTEM
BE-7
1996 TERCEL (RM440U) Fuel Level Warning Light does not light up.
1. Bulb
2. Fuel Level Warning Switch
3. Meter Circuit
4. Wire Harness-
BE-38
BE-35
-
Low Oil Pressure Warning Light does not light up.
1. Bulb
2. Low Oil Pressure Warning Switch
3. Meter Circuit
4. Wire Harness-
BE-38
BE-35
-
Door Open Warning Light does not light up.
1. Bulb
2. DOME Fuse (Engine Room R/B)
3. Door Courtesy Switch
4. Meter Circuit
5. Wire Harness-
-
BE-38
BE-35
-
Discharge Warning Light does not light up.
1. Bulb
2. IGN Fuse (I/P J/B)
3. Generator
4. Meter Circuit
5. Wire Harness-
-
-
BE-35
-
COMBINATION METER (INDICATOR LIGHTS)
TroubleParts nameSee page
SRS Indicator Light does not light up.
1. Bulb
2. Wire Harness
3. Airbag Sensor Assembly-
-
DI-146
ABS Indicator Light does not light up.
1. Bulb
2. Wire Harness
3. ABS ECU-
-
DI-109
Malfunction Indicator Light does not light up.
1. Bulb
2. ECM
3. Wire Harness-
-
-
O/D OFF Indicator Light does not light up.
1. Bulb
2. O/D Main Switch
3. ECM
4. Meter Circuit
5. Wire Harness-
-
-
BE-35
-
Turn Indicator Light does not light up.
1. Bulb
2. Turn Signal and Hazard Warning System
3. Meter Circuit
4. Wire Harness-
BE-21
BE-35
-
High Beam Indicator Light does not light up.
1. Bulb
2. Headlight System
3. Meter Circuit
4. Wire Harness-
BE-13
BE-35
-
Security Indicator Light does not light up.
1. Bulb
2. Theft Deterrent System
3. Meter Circuit
4. Wire Harness-
DI-215
BE-35
-
Page 1034 of 1202
BE0RA-02
I05953
Combination Meter
Meter CircuitDoor Lock Control Relay or Theft Deterrent ECU
ECM
Ignition Switch Rheostat Light Control Volume
ABS ECUBrake Fluid Level Warning Switch
Engine Room R/B
DOME Fuse
I/P J/B
Integration Relay
GAUGE Fuse
IGN Fuse
TURN Fuse
TAIL FuseAirbag Sensor Assembly
Parking Brake Switch
- BODY ELECTRICALCOMBINATION METER
BE-33
1996 TERCEL (RM440U)
LOCATION
Page 1037 of 1202
I16684
No.Wiring Connector Side
1
2
3
4
5
6
7GAUGE Fuse
10
11
12
13
1
2
3
4
5
7
8
1
2
3
4
5
6
7
8
9
10Generator
IGN Fuse
SRS Fuse
Airbag Sensor Assembly
Seat Belt Buckle Switch
Low Oil Pressure Warning Switch
Igniter
TAIL Fuse
Door Courtesy Switch
DOME Fuse
Fuel Level Warning Switch
Engine Coolant Temperature Sender Gauge
ABS ECU
ECM
O/D Off Switch
Light Control Rheostat
Ground
Headlight Dimmer Switch
Turn Signal Switch (Left) Ground
Fuel Sender Gauge
Theft Deterrent ECU
Speed Control Unit
Ground
Starter Relay
Brake Fluid Level Warning Switch
and Parking Brake Switch
Turn Signal Switch (Right) A
B
C
F
E
T: Fuel Receiver Gauge
: Engine Coolant Temperature Receiver Gauge
: Tachometer
Hi-Grade
SRS Warning Illumination Open Door Warning Hi-Beam Indicator Security Indicator Left Turn Indicator Right Turn Indicator Discharge Warning Seat Belt Warning O/D Off Indicator Brake WarningBulb Check Relay Malfunction Indicator Low Oil Pressure Warning ABS Warning Fuel Lever Warning Speed Sensor
A5 B7 A12 C2 A2
A6
B5 C9 B4 A7 B3 B1 A10 B8 B9 C7 C4
A4 A11 A13C1 C5C3 C10A3 C8C6 A1TE F BE-36
- BODY ELECTRICALCOMBINATION METER
1996 TERCEL (RM440U)
Page 1038 of 1202
I16685
No.Wiring Connector Side
1
2
3
4
5
6
7GAUGE Fuse
10
11
12
13
1
3
4
5
7
1
2
3
4
5
6
7
8
9
10Generator
IGN Fuse
SRS Fuse
Airbag Sensor Assembly
Seat Belt Buckle Switch
Low Oil Pressure Warning Switch
Igniter
TAIL Fuse
Door Courtesy Switch
DOME Fuse
Fuel Level Warning Switch
ABS ECU
ECM
O/D Off Switch
Light Control Rheostat
Headlight Dimmer Switch
Turn Signal Switch (Left) Ground
Fuel Sender Gauge
Theft Deterrent ECU
Speed Control Unit
Ground
Starter Relay
Brake Fluid Level Warning Switch
and Parking Brake Switch
Turn Signal Switch (Right) A
B
C
F
E
T: Fuel Receiver Gauge
: Engine Coolant Temperature Receiver Gauge
: Tachometer
8
9Ground
Engine Coolant Temperature Sender Gauge
A4 A11 A13C1 C5C3 C10A3 C8C6 A1
A5 B7 A12 C2 A2
A6
B5 C9 B4 A7 B3 B1 A10 A8 A9 C7 C4
SRS Warning Illumination Open Door Warning Hi-Beam Indicator Security Indicator Left Turn Indicator Right Turn Indicator Discharge Warning Seat Belt Warning O/D Off Indicator Brake WarningBulb Check Relay Malfunction Indicator Low Oil Pressure Warning ABS Warning
Fuel Lever Warning Speed Sensor TE F Lo-Grade
- BODY ELECTRICALCOMBINATION METER
BE-37
1996 TERCEL (RM440U)
Page 1195 of 1202
AC1D0-04
Z14427
Wire harness side
1
23
4
5
10 9 8 6
71112
Z14428
1 2 3 4 5
1098
6 7 11 12 From back side AC-66
- AIR CONDITIONINGAIR CONDITIONING AMPLIFIER
1218 Author: Date:
1996 TERCEL (RM440U)
AIR CONDITIONING AMPLIFIER
ON-VEHICLE INSPECTION
1. w/ Power Steering:
INSPECT A/C AMPLIFIER CIRCUIT
(a) Disconnect the connector from amplifier and inspect the
connector on wire harness side, as shown in the chart.
Test conditions:
Turn ignition switch to ON
Blower speed control switch at ºHIº position
A/C switch ON
Temperature control lever at MAX COOL
Tester connectionConditionSpecified condition
5 - GroundConstantContinuity
1 - GroundConstantContinuity
6 - GroundConstantContinuity
1 - ECM terminal AC1ConstantContinuity
6 - ECM terminal ACTConstantContinuity
8 - 12ConstantApprox. 1.5 kW at 25°C (77°F)
7 - GroundA/C switch ONBattery positive voltage
7 - GroundA/C switch OFFNo voltage
9 - GroundA/C switch ONBattery positive voltage
9 - GroundA/C switch OFFNo voltage
11 - GroundConstantBattery positive voltage
If circuit is as specified, try replacing the amplifier with a new
one. If the circuit is not as specified, inspect the circuits con-
nected to other parts.
(b) Connect the connector to A/C amplifier and inspect the
wire harness connector from the back side, as shown in
the chart below.
Tester conditions:
Running engine at idle speed
Blower speed control switch at HI position
Temperature control lever at MAX COOL
position
A/C switch ON
Set manifold gauge set
Page 1196 of 1202
Z11344
1234
5
10 9 8 6
7 Wire harness side
N10516
1 2 3 4
5 10 9 8
6 7
From back side
- AIR CONDITIONINGAIR CONDITIONING AMPLIFIER
AC-67
1219 Author: Date:
1996 TERCEL (RM440U)Tester connection
ConditionSpecified condition
2 - GroundRefrigerant pressure 196 - 3,140 kPaBattery positive voltage
2 - GroundRefrigerant pressure less than
196 kPa or more than 3,140No voltage
If circuit is as specified, try replacing the amplifier with a new
one. If the circuit is not as specified, inspect the circuits con-
nected to other parts.
2. w/o Power steering:
INSPECT A/C AMPLIFIER
(a) Disconnect the connector from amplifier and inspect the
connector on wire harness side, as shown in the chart.
Test conditions:
Turn ignition switch to ON
Blower speed control switch at HI position
A/C switch ON
Temperature control lever at MAX COOL
Test connectionConditionSpeed condition
4 - GroundConstantContinuity
6 - ECM terminal ACTConstantContinuity
8 - ECM terminal AC1ConstantContinuity
6 - 10ConstantApprox. 1.5 kW at 25°C (77°F)
5 - GroundA/C switch ONBattery positive voltage
5 - GroundA/C switch OFFNo voltage
9 - GroundIgnition switch ONBattery positive voltage
9 - GroundIgnition switch ONNo voltage
7 - GroundA/C switch ONBattery positive voltage
7 - GroundA/C switch OFFNo voltage
If circuit is as specified, try replacing the amplifier with a new
one. If the circuit is not as specified, inspect the circuits con-
nected to other parts.
(b) Connect the connector to amplifier and inspect the wire
harness connector from back side, as shown in the chart
below.
Test conditions:
Running engine at idle speed
Blower speed control switch at HI position
Temperature control lever at MAX COOL
position
A/C switch ON
Set manifold gauge set
