1996 TOYOTA T100 fuel filter

Downloaded from www.Manualslib.com manuals search engine P15055
SF0BW−01
P15059
SF−10
− SFI (5VZ−FE)FUEL PUMP
1996 TOYOTA T100 (RM449U)
DISASSEMBLY
1. REMOVE FUEL PUMP FROM FUEL PUMP BRACKET
(a) Disconnect the fuel pump connector.
(b) Pull off the lower side of the fuel pump from the pump
bracket.
(c) Disconnect the fuel hose from the fuel pump, and remove
the fuel pump.
(d) Remove the rubber cushion from the fuel pump.
2. REMOVE FUEL PUMP FILTER FROM FUEL PUMP
(a) Using a small screwdriver, remove the clip.
HINT:
Install the pump filter with a new clip.
(b) Pull out the pump filter.

Downloaded from www.Manualslib.com manuals search engine SF−48
− SFI (5VZ−FE)VSV FOR FUEL PRESSURE CONTROL
1054 Author: Date:
1996 TOYOTA T100 (RM449U)
(b) Apply battery positive voltage across the terminals.
(c) Check that air flows from port E to the filter.
If operation is not as specified, replace the VSV.
5. REINSTALL VSV
(a) Install the VSV with the 2 bolts.
Torque: 8 N·m (80 kgf·cm, 71 in.·lbf)
(b) w/ EGR:
Connect the 2 connectors and 4 vacuum hoses to the 2
VSV.
(c) w/o EGR:
Connect the connector and 2 vacuum hoses to the VSV.

Downloaded from www.Manualslib.com manuals search engine B00319
Recommended Viscosity (SAE):
10W−30
5W−30 PREFERRED
TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE
°F −20 0 20 40 60 80 100
°C −29 −18 −7 4 16 27 38
LU0O7−01
− LUBRICATION (3RZ−FE)OIL AND FILTER
LU−1
1109 Author: Date:
1996 TOYOTA T100 (RM449U)
OIL AND FILTER
INSPECTION
1. CHECK ENGINE OIL QUALITY
Check the oil for deterioration, entry of water, discoloring or thin-
ning.
If the quality is visibly poor, replace the oil.
Oil grade:
API grade SH Energy−Conserving II or SJ,
Energy−Conserving or ILSAC multigrade engine oil.
SAE 5W−30 is the bset choise for your vehicle, for
good fuel economy, and good starting in cold
weather.
2. CHECK ENGINE OIL LEVEL
The oil level should be between the ”L” and ”F” marks on the dip-
stick.
If low, check for leakage and add oil up to ”F” mark.
NOTICE:
Do not fill with engine oil above the ”F” mark.
When inserting the dipstick, insert the curved tip of
the dipstick facing the same direction as the curve of
the guide.
If the dipstick gets caught while inserting it, do not
force it in. Reconfirm the direction of the dipstick.
3. REMOVE ENGINE UNDER COVER

Downloaded from www.Manualslib.com manuals search engine LU0817
Recommended Viscosity (SAE):
10W−30
5W−30 PREFERRED
TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE
LU033−04
P20966SST
P20969
Oil Pressure Gauge
− LUBRICATION (5VZ−FE)OIL AND FILTER
LU−1
1121 Author: Date:
1996 TOYOTA T100 (RM449U)
OIL AND FILTER
INSPECTION
1. CHECK ENGINE OIL QUALITY
Check the oil for deterioration, entry of water, discoloring or thin-
ning.
If oil quality is visibly poor, replace it.
Oil grade:
API grade SH Energy−Conserving II or ILSAC multi-
grade engine oil.
SAE 5W−30 is the bset choise for your vehicle, for
good fuel economy, and good starting in cold
weather.
2. CHECK ENGINE OIL LEVEL
The oil level should be between the ”L” and ”F” marks on the dip-
stick.
3. CHECK OIL LEVEL
The oil level should be between the ”L” and ”F” marks on the lev-
el gauge. If low, check for leakage and add oil up to the ”F” mark.
If low, check for leakage and add oil up to the ”F” mark.
When inserting the oil dipstick, insert the curved tip of the
dipstick facing the same direction as the curve of the
guide.If the dipstick gets caught while inserting it, do not
force it in. Reconfirm the direction of the dipstick.
4. REMOVE OIL PRESSURE SWITCH
Using SST, remove the oil pressure switch.
SST 09816−30010
5. INSTALL OIL PRESSURE GAUGE
6. START ENGINE
Start the engine and warm it up to normal operating tempera-
ture.
7. CHECK OIL PRESSURE
Oil pressure:
At idle speed
29 kPa (0.3 kgf/cm
2, 4.3 psi) or more
At 3,000 rpm
245 − 520 kPa (2.5 − 5.3 kgf/cm
2, 36 − 75 psi)
8. REMOVE OIL PRESSURE GAUGE