1996 TOYOTA T100 wheel alignment

Downloaded from www.Manualslib.com manuals search engine R08019
Front
Front Cam
(Longer)Front Cam
(Shorter)
(Longer)
(Longer) (Shorter)
(Shorter) Rear Cam
Rear Cam
− SUSPENSION AND AXLEFRONT WHEEL ALIGNMENT (4WD)
SA−13
1452 Author: Date:
1996 TOYOTA T100 (RM449U)

Downloaded from www.Manualslib.com manuals search engine SA−14
− SUSPENSION AND AXLEFRONT WHEEL ALIGNMENT (4WD)
1453 Author: Date:
1996 TOYOTA T100 (RM449U)

Downloaded from www.Manualslib.com manuals search engine R04258
− SUSPENSION AND AXLEFRONT AXLE HUB (2WD)
SA−21
1996 TOYOTA T100 (RM449U)
(f) Using a dial indicator, measure the hub bearing backlash.
Maximum: 0.05 mm (0.0020 in.)
9. INSTALL LOCK CAP, COTTER PIN AND GREASE CAP
(a) Install the lock cap and a new cotter pin.
(b) Install the grease cap.
10. INSTALL BRAKE CALIPER
Install the 2 brake caliper set bolts.
Torque: 108 N·m (1,100 kgf·cm, 80 ft·lbf)
11. w/ ABS:
CONNECT ABS SPEED SENSOR TO STEERING
KNUCKLE
Torque: 8.0 N·m (82 kgf·cm, 71 in.·lbf)
12. INSTALL FRONT WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
13. CHECK FRONT WHEEL ALIGNMENT
(See page SA−7)
14. w/ ABS:
CHECK ABS SPEED SENSOR SIGNAL
(See page DI−321)

Downloaded from www.Manualslib.com manuals search engine − SUSPENSION AND AXLESTEERING KNUCKLE (4WD)
SA−35
1996 TOYOTA T100 (RM449U)
3. CONNECT FRONT SHOCK ABSORBER TO LOWER
SUSPENSION ARM
Install the shock absorber, bolt, washer and nut to the lower
suspension arm.
Torque: 137 N·m (1,400 kgf·cm, 101 ft·lbf)
4. INSTALL DUST COVER AND NEW OIL SEAL
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
5. INSTALL FRONT AXLE HUB AND BRAKE CALIPER
(See page SA−25)
6. CHECK FRONT WHEEL ALIGNMENT
(See page SA−10)
7. w/ ABS:
CHECK ABS SPEED SENSOR SIGNAL
(See page DI−321)

Downloaded from www.Manualslib.com manuals search engine SA0G1−01
− SUSPENSION AND AXLEFRONT DRIVE SHAFT (4WD)
SA−41
1996 TOYOTA T100 (RM449U)
INSTALLATION
Installation is in the reverse order of removal (See page SA−37).
AFTER INSTALLATION, CHECK FRONT WHEEL ALIGNMENT (See page SA−10)

Downloaded from www.Manualslib.com manuals search engine SA0GO−01
SA−84
− SUSPENSION AND AXLEFRONT TORSION BAR SPRING (2WD)
1996 TOYOTA T100 (RM449U)
INSTALLATION
Installation is in the reverse order of removal (See page SA−83).
AFTER INSTALLATION CHECK FRONT WHEEL ALIGNMENT (See page SA−7)

Downloaded from www.Manualslib.com manuals search engine SA0GR−01
− SUSPENSION AND AXLEFRONT TORSION BAR SPRING (4WD)
SA−87
1996 TOYOTA T100 (RM449U)
INSTALLATION
Installation is in the reverse order of removal (See page SA−86).
AFTER INSTALLATION, CHECK FRONT WHEEL ALIGNMENT (See page SA−10)

Downloaded from www.Manualslib.com manuals search engine SA0GU−01
SA−90
− SUSPENSION AND AXLEFRONT STRUT BAR (2WD)
1996 TOYOTA T100 (RM449U)
INSTALLATION
Installation is in the reverse order of removal (See page SA−89).
AFTER INSTALLATION, CHECK FRONT WHEEL ALIGNMENT (See page SA−7)