1996 TOYOTA RAV4 key

AX04X−02
Q08861
Key Interlock SolenoidStop Light Switch
Shift Lock Override Button Cover
Shift Lock Solenoid
Shift Lock Control Switch
Shift Lock Control ECU HINT:
 The shift indicator housing ordered as
supply parts does not include the cover
of the shift−lock override button.
So, if you replace the shift indicator
housing, install cover from the old
housing into the new housing.
 Install the cover with its cutout facing
toward the rear of the vehicle.
− AUTOMATIC TRANSAXLE (A241E)SHIFT LOCK SYSTEM
AX−11
1996 RAV4 (RM447U)
SHIFT LOCK SYSTEM
LOCATION

Q09052
21
Q09053
21
Z193392 (P)1 (P2)
3 (P1)
− AUTOMATIC TRANSAXLE (A241E)SHIFT LOCK SYSTEM
AX−13
1996 RAV4 (RM447U)
3. INSPECT KEY INTERLOCK SOLENOID
(a) Disconnect the solenoid connector.
(b) Using an ohmmeter, measure the resistance between the
terminals.
Standard resistance: 12.5 − 16.5 Ω
If resistance value is not as specified, replace the solenoid.
(c) Apply battery positive voltage between the terminals.
Check that the solenoid can be heard operating.
If solenoid operation is not as specified, replace the solenoid.
4. INSPECT SHIFT LOCK CONTROL SWITCH
Inspect that there is continuity between each terminal.
Shift positionTester connectionSpecified value
P position (Release button
is not pushed)2 − 3 (P − P1)Continuity
P position (Release button
is pushed)2 − 3 (P − P1)
2 − 1 (P − P2)Continuity
R, N, D, 2, L position2 − 1 (P − P2)Continuity
If continuity is not as specified, replace the switch.

AX04X−03
Q08861
Key Interlock SolenoidStop Light Switch
Shift Lock Override Button Cover
Shift Lock Solenoid
Shift Lock Control Switch
Shift Lock Control ECU HINT:
 The shift indicator housing ordered as
supply parts does not include the cover
of the shift−lock override button.
So, if you replace the shift indicator
housing, install cover from the old
housing into the new housing.
 Install the cover with its cutout facing
toward the rear of the vehicle.
− AUTOMATIC TRANSAXLE (A540H)SHIFT LOCK SYSTEM
AX−15
1996 RAV4 (RM447U)
SHIFT LOCK SYSTEM
LOCATION

Q09052
21
Q09053
21
Z193392 (P)1 (P2)
3 (P1)
− AUTOMATIC TRANSAXLE (A540H)SHIFT LOCK SYSTEM
AX−17
1996 RAV4 (RM447U)
3. INSPECT KEY INTERLOCK SOLENOID
(a) Disconnect the solenoid connector.
(b) Using an ohmmeter, measure resistance between the ter-
minals.
Standard resistance: 12.5 − 16.5 Ω
If resistance value is not as specified, replace the solenoid.
(c) Apply battery positive voltage between the terminals.
Check that the solenoid can be heard operating.
If the solenoid does not operated, replace the solenoid.
4. INSPECT SHIFT LOCK CONTROL SWITCH
Inspect that there is continuity between each terminal.
Shift positionTester connectionSpecified value
P position (Release button
is not pushed)2 − 3
(P − P1)Continuity
P position (Release button
is pushed)
2 − 3
(P − P1)
2 − 1
(P − P2)
Continuity
R, N, D, 2, L position2 − 1
(P − P2)Continuity
If continuity is not as specified, replace the switch.

BE0J3−04
BE−10− BODY ELECTRICALIGNITION SWITCH AND KEY UNLOCK WARNING
SWITCH
1996 RAV4 (RM447U)
IGNITION SWITCH AND KEY UNLOCK WARNING SWITCH
LOCATION

N11771
1
82 3
4
65 7
BE0J4−04
Z10028
1
2
OFF
ON
N01923
N01924
N01925
− BODY ELECTRICALIGNITION SWITCH AND KEY UNLOCK WARNING
SWITCHBE−11
1996 RAV4 (RM447U)
INSPECTION
1. INSPECT IGNITION SWITCH CONTINUITY
Switch positionTester connectionSpecified condition
LOCK−No continuity
ACC2 − 3Continuity
ON2 − 3 − 4, 6 − 7Continuity
START1−2−4, 6−7−8Continuity
If continuity is not as specified, replace the switch.
2. INSPECT KEY UNLOCK WARNING SWITCH CONTI-
NUITY
Switch positionTester connectionSpecified condition
SW OFF
(Key removed) −No continuity
SW ON (Key set)1 − 2Continuity
If continuity is not as specified, replace the switch.
3. Key Unlock Warning System:
INSPECT INTEGRATION RELAY OPERATION
(a) Connect the positive (+) lead from the battery to terminal
A1.
(b) Connect the negative (−) lead from the battery to termi-
nals A5, A6 and A10.
(c) Check the buzzer sounds.
(d) Disconnect the negative (−) lead from the battery to termi-
nals A6.
(e) Check that the buzzer stops sounding.
(f) Connect the negative (−) lead from the battery to termi-
nals A6.
(g) Disconnect the negative (−) lead from the battery to termi-
nals A5.
(h) Check that the buzzer stops sounding.
If operation is not as specified, replace the relay.

BE−12− BODY ELECTRICALIGNITION SWITCH AND KEY UNLOCK WARNING
SWITCH
1996 RAV4 (RM447U)
4. INSPECT INTEGRATION RELAY CIRCUIT (See page
BE−37)
5. INSPECT DOOR COURTESY SWITCH CONTINUITY
(See Page BE−22)

S01655
SST
S01284
SST
S01624
S01597
S01651
EM−16
− ENGINE MECHANICALTIMING BELT
1996 RAV4 (RM447U)
(b) Using SST, remove the pulley.
SST 09950−50010 (09951−05010, 09952−05010,
09953−05010, 09953−05020,
09954−05020 for type A,
09954−05010 for type B)
13. REMOVE RH ENGINE MOUNTING BRACKET
Using SST, remove the 3 bolts and mounting bracket.
SST 09249−63010
14. REMOVE NO. 2 TIMING BELT COVER
(a) Disconnect the engine wire from the timing belt cover.
(b) Remove the 4 bolts and timing belt cover.
15. TEMPORARILY INSTALL CRANKSHAFT PULLEY
(a) Align the pulley set key with the key groove of the pulley,
and slide on the pulley.
(b) Temporarily install the pulley bolt.
16. SET NO. 1 CYLINDER TO TDC/COMPRESSION
(a) Turn the crankshaft pulley and align its groove with timing
mark ”0” of the No. 1 timing belt cover.
(b) Check that the hole of the camshaft timing pulley is
aligned with the timing mark of the bearing cap.
If not, turn the crankshaft 1 revolution (360°).
17. REMOVE TIMING BELT FROM CAMSHAFT TIMING
PULLEY
HINT:
When re−using timing belt:
Place matchmarks on the timing belt and camshaft timing
pulley, and place matchmark on timing belt to match the end of
the No. 1 timing belt cover.