Page 352 of 1399
BR1CP−03
BR3753
−
BRAKE BRAKE BOOSTER ASSEMBLY
BR−19
1996 LAND CRUISER (RM451U)
REMOVAL
1. REMOVE MASTER CYLINDER (See page BR−9 )
2. REMOVE THESE PARTS:
Return spring
Clip and clevis pin
Clevis
Vacuum hose
3. REMOVE BRAKE BOOSTER
(a) Remove the 4 booster installation nuts.
(b) Remove the booster and gasket.
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 353 of 1399
BR1CQ−01
BR3976
SST
Gasket
R11347
SST
BR−20
−
BRAKE BRAKE BOOSTER ASSEMBLY
1996 LAND CRUISER (RM451U)
INSTALLATION
1. INSTALL BRAKE BOOSTER
(a) Install the booster and a new gasket.
(b) Install the clevis to the operating rod.
(c) Install and torque the booster installation nuts. Torque: 13 N·m (130 kgf·cm, 9 ft·lbf)
(d) Install the clevis pin into the clevis and brake pedal, and
install the clip to the clevis pin.
(e) Install the pedal return spring.
2. ADJUST LENGTH OF BOOSTER PUSH ROD
(a) Install a new gasket on the master cylinder.
(b) Set the SST on the gasket, and lower the pin until its tip slightly touches the piston.
SST 09737−00010
(c) Turn the SST upside down, and set it on the booster. SST 09737−00010
(d) Measure the clearance between the booster push rod and pin head (SST).
Clearance: 0 mm (0 in.)
(e) Adjust the booster push rod length until the push rod light-
ly touches the pin head.
3. INSTALL MASTER CYLINDER (See page BR−9 )
4. CONNECT VACUUM HOSE TO BRAKE BOOSTER
5. FILL BRAKE RESERVOIR WITH BRAKE FLUID AND
BLEED BRAKE SYSTEM (See page BR−4 )
6. CHECK FOR FLUID LEAKAGE
7. CHECK AND ADJUST BRAKE PEDAL (See page BR−6 )
8. DO OPERATIONAL CHECK (See page BR−17 )
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 1337 of 1399
SS1EF−02
SS−36
−
SERVICE SPECIFICATIONS BRAKE
1996 LAND CRUISER (RM451U)
TORQUE SPECIFICATION
Part tightenedN·mkgf·cmft·lbf
Master cylinder x Piston stopper bolt101007
Master cylinder x Reservoir1.717.515.2 in.·lbf
Master cylinder x Brake booster131309
Brake line union nut1515511
Brake booster clevis lock nut2526019
Brake booster x Pedal bracket131309
Bleeder plug1111 08
Front disc brake caliper installation bolt1231,25090
Front disc brake caliper x Flexible hose3031022
Parking brake bellcrank x Backing plate131309
Rear disc brake cliper x Spindle pin8890065
Rear disc brake caliper x Flexible hose3031022
Rear disc brake torque plate x Knuckle1031,05076
LSP & BV bracket x Frame2526019
LSP & BV x LSP & BV bracket131309
LSP & BV spring x LSP & BV bracket1818513
LSP & BV spring x Shackle No. 11818513
LSP & BV shackle lock nut2525018
LSP & BV shackle x Shackle bracket131309
LSP & BV shackle bracket x Rear axle housing1919514
ABS actuator assembly x Body1919514
ABS actuator x Actuator bracket5.45548 in.·lbf
ABS control relay x Actuator bracket131309
Front speed sensor installation bolt1818513
Rear speed sensor installation bolt1818513
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
