1996 PONTIAC FIREBIRD change time

If you’re driving on a very rough road or if it’s very hot,
the disc may not play and E (error) and a number may
appear on the radio display. If the disc comes out, it
could be that:
The disc is upside down.
It is dirty, scratched or wet.
The air is very humid. (If so, wait about an hour
If any error occurs repeatedly or if an error can’t be
corrected, please contact your dealer.
If your radio
displays
an error number, write it down and provide it to
your dealer when reporting the problem.
RECALL: Press this button to see what track is playing.
Press it again within five seconds to see how long
it has
been playing (elapsed time). The track number also
appears when the disc is inserted, the volume is changed
or when a new track starts playing.
PREV (1): Press this button or the SEEK down arrow to
go to the start of the current track if more than eight
seconds have played.
If you hold the button or press it
more than once, the player
will continue moving back
through the disc.
’ NEXT (2): Press this button or the SEEK up arrow to
go
to the start of the next track if more than eight
and
try again.) seconds
have played. If you hold the button or press it
more than once, the player will continue moving
forward through the disc.
RDM (3): Press this button t’o hear the tracks in a
random order. It will change tracks
in a random, rather
than sequential order. Press
RDM again to turn off
random play. The radio will play during this operation.
REV (5): Press and hold this button to quickly reverse
within a track (song). Release it to play the passage. You
will hear sound at a reduced volume. The display will
show elapsed time.
FWD (6): Press and hold this button to quickly advance
within a track (song). You will hear sound at
a reduced
volume. The
display will show elapsed time.
AM-FM: Press this button to play the radio when a disc
is playing. The disc will stop but remain in the player.
CDPLAY Press this button to change to the disc
function when the radio is on.
EJECT Press this button to remove the disc or stop the
disc and switch to’ the radio. EJECT will work with the
radio
off.
3-17
. .. ... ProCarManuals.com

Remember: Anti-lock doesn’t change the time you need
to get your foot up to the brake pedal or always decrease
stopping distance.
If you get too close to the vehicle in
front
of you, you won’t have time to apply your brakes
if that vehicle sudd’enly slows or stops. Alwayssleave
enough room up ahead to stop, even
though you have
anti-lock brakes.
Using Anti-Lock
Don’t pump the brakes. Just hold the brake pedal
down and let anti-lock work for you.
You may feel
the system working,
or you may notice some noise,
but this is normal.
LOW
TRAC
When your anti-lock system
is adjusting brake pressure
to help avoid a braking skid,
this light will come
on.
See ‘‘L’ow Traction Light”
in the
Index
naction Control, System
(Option: LTl VS Engine) I
Your vehicle may have a traction control system that
limits wheel spin. This is especially usefulin slippery
road conditions.
The system operates only if it senses that
one or both of
the rear wheels are spinning or beginning
to lose traction. When
this happens, the system works the
rear brakes and reduces engine, power (by closing the
throttle and managing engine spark) to limit wheel spin.
LOW
TRAC
This light will come on
when YQLU traction control
system is limiting wheel
spin. See “Low Traction
Light”
in the Index. You
may feel or hear the system
working, but this is normal.
The traction control system may operate on dry roads
under some conditions, and you may notice a reduction in
acceleration when this happen,€, This is normal and doesn’t
mean there’s
a problem with your vehicle. Examples of
fhese conditions include a hard acceleration in a turn, or an
ProCarManuals.com

. If the traction control system is limiting wheel spin
when you press the button, the light on the button will
.go off and the warning light will come on -- but the
_. ._ ,system won't turn off right away. It will wait until
gathere's
no longer a current need to limit wheel spin. I
You can turn the system back an at any time by pressing
the button
again. The light on the button should come
on, and the traction control system w'arning light should
go off.
If your car is equipped with P245/50zR16 tires, the
traction control system will automatically
turn off at
speeds above 108 mph (1 74 km/h). (The traction, control
system waning light will not corn on.) When the
vehicle
speed drops below 103 mph (1 66 km/h) the
system will automatically come on again.
- Braking in Emergencies
Use your anti-lock braking system when you need to.
With anti-lock, you can steer and brake at the same
time. In many emergencies, steering can help you more
than even
the very best braking.
Steering
Power Steering
If you lose power steering assist because the engine
stops or the system
is not functioning, you can steer but
it will take much
more effort.
Steering Tips
Driving on Curves
It's important to take curves at a reasonable speed.
A lot of the "driver lost control" accidents mentioned on
the news happen on curves. Here's why:
Experienced driver or beginner, each of us
is subject to
the same laws
of physics when driving on curves. The
traction
of the tires against the road surface makes it
possible for the vehicle to change its path when you turn
the front wheels. If there's no traction, inertia will keep
the vehicle going in the same direction. If you've ever
tried to steer a vehicle on wet ice, you'll understand
this.
i ., _. .I ..
ProCarManuals.com

0
0
0
0
Check your mirrors, glance over your shoulder, and
start your left lane change signal before moving out
of the right lane to pass. When you are far enough
ahead of the passed vehicle to see its front in your
inside mirror, activate your right
lane change signal
and move back into the right lane. (Remember that
your right outside mirror
is convex. The vehicle you
just passed may seem to be farther away from you
than
L it really is,)
Try not to pass more than one vehicle at a time
on two-lane roads. Reconsider before passing the
next vehicle.
Don’t
overtake a slowly moving vehicle too rapidly.
Even though the brake lamps
are not flashing,,it may
be slowing down or starting to turn.
If you’re being passed, make it easy for the
following driver to get ahead
of you. Perhaps you
can ease a little to the right.
Loss of Control
Skidding
In a skid, a driver can lose control of the vehicle.
Defensive drivers avoid
most skids by taking reasonable
care suited to existing conditions, and by not “overdriving”\

those conditions. But skids
are always possible.
The three types of skids correspond
to your Pontiac’s
three control systems. In the braking
skid, your wheels
aren’t rolling. In the steering or cornering skid, too
much speed or steering in a curve causes tires to slip and
lose cornering force. And in the acceleration skid, too
much throttle causes the driving wheels
to spin.
A cornering skid is best handled by easing your foot off
the accelerator pedal.
If you have the traction control system, remember: It
helps avoid only the acceleration skid.
If
you do not have traction control, or if the system is
off, then an acceleration skid is also best handled by
easing your foot off the accelerator pedal.
Let’s
review what driving experts say about what E your vehicle starts to slide, ease your foot off the
happens when the
three control systems (brakes, steering accelerator
pedal and quickly steer the way you want the
and acceleration) don’t have enough friction where the vehicle to
go. If you start steering quickly enough, your
tires meet the road to do what the driver has asked. vehicle may straighten
out. Always be ready for a
constantly seek an escape route or area of less danger. second
skid if it occurs.
. .-
. -- . r- _.. In any emergency, don’t give up. Keep trying to steer and ..
ProCarManuals.com

Your car can tow a trailer if it is equipped with proper
trailer towing equipment.
To identify what the vehicle
trailering capacity
is for your vehicle, you should read
the infrwmakion in “Weight of the Tr~ler” that appears
later in this section. But trailering
is different than* just
driving your vehicle by itself. Trailering means changes
in handling, durability, and fuel economy. Successful,
safe trailering takes correct equipment, and it has
to be
used properly.
That’s the reason for this part. In it are
many
time-tested, important trailering tips and safety rules.
Many of these are important for your safety and that
of
your passengers. So please read this section carehlly
before you pull a trailer.
Load-pulling components such as the engine,
transmission, rear axle, wheel assemblies and tires
are
forced to work harder against the drag of the added
weight. The engine is required
to operate at relatively
higher speeds and under greater loads, generating extra
heat. What’s more, the trailer adds,considerably to wind
resistance, increasing the pulling requirements.
I
_. . , _, -i .. :
If You Do Decide To Pull A Trailer
If you do, here,are some important points:
0
0
0
0
There are many different laws, including speed limit
restrictions, having to do with trailering. Make sure
your rig will
be legal, not only where you live but
also where you’ll be driving.
A good source for this
information can be state or provincial police.
Consider using
a sway control. You can ask a hitch
dealer about sway
controls.
Don’t tow a trailer at all during the first 1,000 miles
(1 600 km) your new vehicle is driven. Your eng-k,
axle or 0ther.part.s could be damaged.
Then, during the first
500 miles (800 km) that you
tow a trailer, don’t drive ov’er 50 mph (80 km/h) and
don’t make starts
at full throttle. This helps your
engine and other parts of your vehicle wear in at the
heavier loads.
Obey speed limit restrictions when towing a trailer.
Don’t drive faster than the maximum posted speed
for trailers (or no more than
55 mph (90 km/h)) to
save wear on your vehicle’s parts.
4-32
ProCarManuals.com

4. Raise the vehicle by rotating the wheel wrench
clockwise. Raise the vehicle
far enough off the ground
SO there is enough room for the spare tire to fit.
Remove all the wheel nuts and take off the flat tire.
5. Remove any rust or dirt
from the wheel bolts,
mounting surfaces and
spare wheel.
A CAUTION:’
Rust or dirt on the wheel, or on the parts to
which it is fastened, can make the wheel nuts
become loose after a time. The wheel could come
off and cause an accident. When you change a
wheel, remove any rust or
dirt from the places
where the wheel attaches to the vehicle. In an
emergency, you can use
a cloth or a paper towel
to do
this; but be sure to use a scraper or wire
brush later,
if you need to, to get all the rust or
dirt off.
5-35
ProCarManuals.com

Automatic Transmission Fluid
When to Check and Change
A good time to check your automatic transmission fluid
level is when the engine oil
is changed.
Change both
the fluid and filter every 15,000 miles
(25 000 km) if the vehicle is mainly driven under one
or more
of these conditions:
In heavy city traffic where the outside temperature
regularly reaches
90°F (32°C) or higher.
In hilly or mountainous terrain.
When doing frequent trailer towing.
Uses such as found in taxi, police or delivery service.
If you do not use your vehicle under any of these
con’ditions, change
the fluid and filter every 100,000 miles
(166 000 km).
See “Scheduled Maintenance Services” in the Index.
How to Check
Because this operation can be a little difficult, you
may choose to have this done at your Pontiac dealership
Service Department.
If you do it yourself, be sure to follow all the instructions
here, or you could get a false reading on the dipstick.
NOTICE:
Too much or too little fluid can damage your
transmission. Too much can mean that some of
the fluid could come out and fall on hot engine
parts or exhaust system parts, starting a fire.
Be
sure to get an accurate reading if you check your
transmission fluid.
Wait at least 30 minutes before checking the
transmission fluid level if
you have been driving:
When outside temperatures are above 90°F (32 ” C).
At high speed for quite a while.
0 In heavy traffic -- especially in hot weather.
0 While pulling a trailer.
To get the right reading, the fluid should be at normal
operating temperature, which
is 180°F to 200°F
(82°C to 93°C).
ProCarManuals.com

Manual Transmission Fluid
When to Check
A good time to have it checked is when the engine oil is
changed. However, the fluid in your manual
transmission doesn’t require changing.
How to Check
Because this operation can be difficult, you may choose
to have this done at your Pontiac dealership Service
Department.
If you do it yourself, be sure to follow all the
instructions here, or you could get a false reading.
NOTICE:
Too much or too little fluid can damage your
transmission. Too much can mean that some of
the fluid could come out and fall on
hot engine
parts or exhaust system parts, starting a fire. Be
sure to get an accurate reading if you check your
transmission fluid.
Check the fluid level only when your engine is off, the
vehicle is parked on a level place and the transmission
is
cool enough for you to rest your fingers on the
transmission case.
Then, follow these steps:
1. Remove the filler plug.
2. Check that the lubricant level is up to the bottom of
the filler plug hole.
3. If the fluid level is good, install the plug and be sure
it
is fully seated. If the fluid level is low, add more
fluid as described in the next steps.
How to Add Fluid
Here’s how to add fluid. Refer to the Maintenance
Schedule to determine what kind of fluid to use. See
“Recommended Fluids and Lubricants” in the Index.
1. Remove the filler plug.
2. Add fluid at the filler plug hole. Add only enough
fluid to bring the fluid level up to the bottom
of the
filler plug hole.
3. Install the filler plug. Be sure the plug is fully seated.
6-24
ProCarManuals.com