
The 1996 Oldsmobile  Cutlass  Supreme  Owner’s  Manual 
Seats  and  Restraint  Systems ............................................................. 
This section tells you  how  to  use  your seats and  safety  belts  properly.  It also explains  the  “SRS”  system. 
This  section  explains  how to 
start and  operate  your  Oldsmobile. 
This  section  tells  you  how to  adjust  the  ventilation  and  comfort  controls  and  how to operate  your 
audio  system. 
Here  you’ll  find  information  and  tips  about  the  road  and  how to drive  under  different  conditions. 
This  section  tells  you  what  to  do 
if you  have  a  problem  while  driving,  such  as  a  flat  tire  or 
overheated  engine,  etc. 
ServiceandAppearanceCare ............................................................ 
Here  the  manual  tells  you  how  to keep  your  Oldsmobile  running  properly  and  looking  good. 
Maintenance  Schedule .................................................................. 
This  section  tells  you  when to perform  vehicle  maintenance  and  what  fluids  and  lubricants to use. 
Customer  Assistance  Information ........................................................ 
This section  tells  you  how  to  contact  Oldsmobile  for  assistance  and \
 how to get  service  and owner publications. 
It also gives  you  information.on  “Reporting  Safety  Defects”  on  page\
 8-7. 
Index ........................................................................\
.......... 
Here’s  an  alphabetical  listing  of almost  every  subject  in  this  manual.  You can  use  it to quickly  find 
something  you  want  to read. 
FeaturesandControls .................................................................. 
Comfort  Controls  and  Audio  Systems .................. ’. .................................. 
YourDrivingandtheRoad .............................................................. 
ProblemsontheRoad .................................................................. 
1-1 
2-1 
3-1 
4-1 
5-1 
6- 1 
7-1 
8-1 
9-1 
i  

Yneine  Coolant  Heater  (Option) 
In very  cold weather, 
0°F (- 18 O C) or  colder, 
the engine  coolant  heater 
can  help.  You’ll  get 
I 
easier  starting  and better 
fuel  economy  during 
engine  warm-up. 
A CAUTION: 
Plugging  the 
could  cause  an electrical  shock.  Also,  the  wrong 
kind 
of extension  cord  could  overheat  and  cause 
a  fire. 
You could  be  seriously  injured.  Plug  the 
cord  into  a  properly  grounded  three-prong 
110-volt  AC  outlet. 
If the  cord  won’t  reach,  use a 
heavy-duty  three-prong  extension  cord  rated for 
at  least 15 amps. 
Usually,  the  coolant  heater  should  be plugged  in  a 
minimum  of  four hours  prior  to starting  your  vehicle. 
To Use  the  Coolant  Heater 
1. Turn off the  engine. 
2. Open  the  hood  and unwrap  the  electrical  cord. 
3. Plug it into  a  normal,  grounded  110-volt  AC  outlet. 
4. After  you’ve  used  the coolant  heater,  be  sure  to 
store  the  cord  as  it was  before  to keep  it away 
from  moving  engine  parts..  If  you  don’t, it could 
be  damaged. 
How long  should  you  keep  the  coolant  heater  plugged 
in?  The  answer  depends  on  the  outside  temperature,  the 
kind  of  oil you  have,  and  some other  things.  Instead  of 
trying 
to list  everything  here,  we  ask  that  you  contact 
your  Oldsmobile  retailer  in  the  area  where  you’ll  be 
parking  your  vehicle.  The retailer  can give  you  the  best 
advice  for that  particular  area.  

NOTICE: 
Don’t drive  in  SECOND (2) for more  than 
25 miles (41 km) at speeds  over 55 mph 
(88 km/h), or you  can damage your transaxle. 
Use  AUTOMATIC  OVERDRIVE 
(@) or 
THIRD 
(3) as  much as possible. 
Don’t  shift into SECOND 
(2) unless  you  are going 
slower  than 
65 mph (105 km/h), or you  can 
damage your  engine. 
FIRST 
(1): This  position  gives  you  even  more  power 
(but  lower  fuel economy)  than 
SECOND (2). You  can 
use  it on  very  steep  hills,  or in  deep  snow  or 
mud. If the 
shift  lever  is put  in 
FIRST (l), the  transaxle  won’t  shift 
into  first  gear  until  the  vehicle  is going  slowly  enough. 
NOTICE: 
If your  front  wheels  can’t  rotate, don’t try to 
drive.  This might  happen  if  you were stuck  in 
very  deep sand  or mud  or were  up against. 
a solid 
object.  You could  damage your  transaxle. 
Also, 
if you  stop  when  going  uphill,  don’t  hold 
your  vehicle  there with  only  the accelerator 
pedal.  This could  overheat  and damage  the 
transaxle.  Use your  brakes  or shift  into.PARK  (P) 
to  hold  your  vehicle  in  position  on 
a hill. 
2-17  

Leaving Your  Vehicle  With  the 
Engine  Runr  ‘ng 
A CAUTION: 
It  can  be  dangerous  to leave  your  vehicle  with  the 
engine  running.  Your vehicle  could  move 
suddenly  if  the  shift  lever  is not  fully  in 
PARK (P) 
with  the  parking  brake  firmly  set.  And, if you 
leave  the  vehicle  with  the  engine  .running,  it  could 
overheat  and  even  catch  fire.  You or  others  could 
be  injured.  Don’t  leave  your  vehicle  with  the  engine  running  unless  you  have  to. 
If  you  have to leave  your vehicle  with the engine 
running, be sure  your vehicle 
is in PARK  (P)  and  your 
parking  brake is firmly set before  you leave  it. After 
you”ve  moved the shift lever  into  the PARK (P) 
position, hold  the regular  brake pedal down. Then,  see 
if  you  can move  the shift lever  away from PARK  (P) 
without  first pulling it  toward  you  (or,  if  you  have a 
console  shift lever,  without  first pushing  the  button). If 
you  can,  it means  that the shift lever  wasn’t fully locked 
into  PARK  (P). 
Torque  Lock 
If you are parking  on  a hill and  you  don’t  shift your 
transaxle into  PARK 
(P) properly, the weight  of the 
vehicle  may  put  too much  force on the  parking  pawl 
in 
the transaxle.  You may  find it difficult to pull the shift 
lever  out of  PARK  (P). This is called “torque  lock.” To 
prevent  torque lock, set  the parking  brake  and  then  shift 
into  PARK  (P)  properly  before you leave  the driver’s 
seat.  To find  out  how,  see “Shifting  Into  PARK (P)” in 
the Index. 
.When  you  are  ready  to  drive, move the shift  lever 
out of 
PARK  (P) 
before you  release  the  parking  brake. 
If  torque lock  does  occur,  you  may  need  to  have another 
vehicle  push yours a little uphill  to  take  some of the 
pressure from the transaxle, 
so you  can  pull  the shift 
lever out  of  PARK  (P). 
2-21  

Anti-Lock  Brake  System  Active  Light 
LOW 
TRAC 
When  your anti-lock system 
is adjusting brake pressure 
to help avoid  a braking  skid, 
the  anti-lock brake  system 
active light will come 
on. 
Engine  Coolant  Temperature  Light 
HOT 
This light tells  you that 
your engine coolant  has 
overheated  or  your radiator 
cooling fan is  not  working. 
Slippery road conditions  may exist  if this  light  comes 
on, 
so adjust  your driving  accordingly.  The light will 
stay  on  for  a few seconds after  the system stops 
adjusting brake  pressure. 
The  anti-lock brake system active light also comes  on 
briefly when  you turn the ignition  key to RUN. If the 
light doesn’t come  on then, have 
it fixed so it will be 
there  to 
tell you  when  the system is active.  If  you 
have been  operating  your vehicle  under  normal 
driving  conditions,  you  should  pull 
off the road, stop 
your  vehicle and  turn 
off the engine  as  soon  as possible. 
In  “Problems  on the  Road,”  this manual  shows  what  to 
do.  See  “Engine  Overheating”  in  the Index. 
2-49  

'- . 
You have  a gage  that 
(shows  the engine coolant 
temperqture.  If  'the  gage 
pointer'moves  into the  red 
. - . 
area,  your engine  is too  hot! 
.. , _. 
That  reading  means  the sanie thing  as the  warning  iight. 
It  nieans  that  your  engine coolant.  has  Overheated.  If  you 
have  been  operating  your  vehicle 
under normal  driving 
conditions, 
you should  pull off the road, stop  your 
vehicle  kd 
turn off the engine  as  soon  as  possible. 
In "Problems  on  the Road," this  manual  sh0w.s  what  to 
do.-See  "Engine  Overheating"  in the  Index. 
, ',  

Thrn  Signals  When  Towing  a  Trailer 
When  you  tow  a  trailer,  your  vehicle  may  need  a different  turn  signal  flasher  and/or  extra  wiring.  Check 
with  your  Oldsmobile  retailer.  The green  arrows  on  your 
instrument  panel  will  flash  !whenever  you  signal  a 
turn 
or  lane  change.  Properly  hooked  up,  the  trailer  lamps 
will  also  flash,  telling  other drivers  you’re  about  to  turn, 
change  lanes  or  stop. 
When  towing  a  trailer,  the green  arrows  on  your 
instrument  panel  will  flash  for turns  even  if the  bulbs  on 
the  trailer  are  burned  out.  Thus,  you  may  think  drivers 
behind  you 
are seeing  your  signal  when  they  are not.  It’s 
important  to  check  occasionally  to  be  sure  the  trailer 
bulbs 
are still  working. 
Driving  On  Grades 
Reduce  speed  and  shift  to  a  lower  gear before you  ,start 
down 
a long  or  steep  downgrade.  If you  don’t  shift 
down,  you  might  have to use  your  brakes 
so much  that 
they  would  get  hot  and  no longer  work  well. 
On  a  long  uphill  grade,  shift  down  and  reduce  your 
speed  to.  around 
45 mph (70 krn/h) to reduce  the 
possibility 
of engine  and  transaxle  overheating.  If  you 
have  overdrive,  you  may  prefer  to  drive  in 
THIRD 
(3) instead  of  AUTOMATIC  OVERDRIVE (a) 
(or,  as  you  need  to,  a  lower  gear). 
Parking  on  Hills 
You  really  should  not  park  your  vehicle,  with  a  trailer 
attached,  on  a  hill.  If  something  goes  wrong,  your  rig 
could  start  to  move.  People  can  be injured,  and  both 
your  vehicle  and  the  trailer  can  be  damaged. 
But 
if you  ever  have to park  your  rig  on  a  hill,  here’s 
how  to do  it: 
1. Apply  your  regular  brakes,  but  don’t  shift  into 
2. Have  someone  place  chocks  under  the  trailer  wheels. 
3. When  the  wheel  chocks are in place,  release-the 
regular  brakes  until  the chocks  absorb  the  load. 
4. Reapply  the  regular  brakes.  Then  apply  your  parking 
brake,  and  then  shift  to  PARK 
(P). 
5. Release  the  regular  brakes.  PARK 
(P) yet. 
4-34  

Engine  Overheating 
You will  find  a  coolant  temperature  gage  and  a  warning 
light  about  a  hot  engine on  your  instrument  panel. 
See 
“Engine  Coolant  Temperature  Gage”  and  “Engine 
Coolant  Temperature  Warning  Light”  in  the  Index.  You 
also  have  a LOW  COOLANT  light  on  your instrument 
panel. 
See “Low  Coolant  Light”  in  the  Index. 
If Steam Is Coming  From Your Engine 
Steam  from an overheated  engine  can burn  you ’ 
badly,  even  if  you just open  the hood.  Stay  away 
from  the engine  if  you  see  or hear  steam  coming 
from 
it. Just  turn  it off and get  everyone  away 
from the  vehicle until it cools  down.  Wait  until 
there  is  no  sign  of steam  or coolant  before 
opening  the hood. 
If you  keep  driving  when  your engine  is 
overheated,  the liquids  in 
it can catch  fire.  You or 
others  could  be  badly  burned.  Stop  your engine  if 
it  overheats,  and get out  of the  vehicle  until  the 
engine  is  cool. 
~ 
I NOTICE: 
If  your  engine  catches  fire because  you  keep 
driving  with  no coolant,  your vehicle  can  be 
badly  damaged.  The costly  repairs  would  not  be 
covered  by  your warranty. 
5-13