1996 FORD WINDSTAR wheel

Driving Your Windstar
243
*
[DR07700(ALL)11/89]
RWARNING
Modifications to the suspension spring rates and/or
vehicle ride height may adversely affect vehicle stopping
ability.
%*
[DR07800(ALL)01/93]
Stopping Distances
*
[DR07900(ALL)01/93]
Stopping distances vary with different loads and driving
conditions. Use caution when you drive under new conditions
and acquaint yourself with your vehicle's performance.
%*
[DR08000(ALL)01/95]
Applying the Brakes
[DR08100(ALL)11/93]
Apply the brake pedal evenly. Use the ªsqueezeº technique.
Push on the brake pedal with a steadily increasing force. This
allows the wheels to continue to roll while you are slowing
down, which lets you steer properly.
*
[DR08200(ALL)05/95]
RWARNING
Do not drive with your foot resting on the brake pedal.
This will increase your vehicle's stopping distance and
may also cause brake damage.
*
[DR08300(ALL)05/95]
RWARNING
If you are driving down a long or steep hill, shift to a
lower gear. Do not apply your brakes continuously, as
they may overheat and become less effective.
File:wndrs.ex
Update:Tue Mar 19 08:18:48 1996

246
*
[DR09500(ALL)07/93]
For example, even with anti-lock brakes, extreme braking can
make it difficult to control the direction of the vehicle. Use a
ªsqueezeº technique. Push on the brake pedal with steadily
increasing force. This allows the wheels to brake, yet continue to
roll so that you may steer in the direction you want to travel.
*
[DR09600(ALL)01/93]
If you release the accelerator abruptly or brake hard while
going too fast around a severe curve, your vehicle may change
its direction of travel. Avoid applying the brakes, if possible. If
you must apply the brakes, use the ªsqueezeº technique
described earlier.
*
[DR09700(ALL)02/95]
Wheel Spin
[DR09800(ALL)05/95]
Extreme acceleration can cause the front wheels to spin,
resulting in reduced steering control. If the wheels spin during
vehicle start-up, shift to 2 (Second) gear. Move forward slowly
and evenly. If this does not work, try rocking the vehicle.
%*
[DR09900(ALL)01/93]
Driving at High Speeds
*
[DR10000(ALL)05/95]
RWARNING
Driving too fast for conditions creates the possibility of
loss of vehicle control. Driving at very high speeds for
extended periods of time may result in damage to vehicle
components.
*
[DR10020(ALL)05/95]
Ford Motor Company recommends obeying posted speed limits.
*
[DR10100(ALL)06/95]
RWARNING
Do not spin the wheels at over 35 mph (55 km/h). The
tires may fail and injure a passenger or bystander.
File:wndrs.ex
Update:Tue Mar 19 08:18:48 1996

Driving Your Windstar
247
%*
[DR10200(ALL)01/95]
Driving in Bad Weather
%*
[DR10300(ALL)01/95]
Slippery roads
[DR10400(ALL)02/95]
n
Drive cautiously on wet or snowy roads.
*
[DR10500(ALL)03/95]
n
Do not quickly move the steering wheel unless necessary.
*
[DR10600(ALL)01/93]
n
Drive more slowly than you would normally.
[DR10650(ALL)02/95]
n
Do not use speed control.
*
[DR10700(ALL)01/95]
n
Give your vehicle more distance to stop.
*
[DR10800(ALL)01/93]
n
Use the ªsqueezeº technique for braking as described in
previous braking sections.
*
[DR10900(ALL)02/93]
n
Consider using one of the lower gears.
*
[DR11000(ALL)01/93]
RWARNING
To avoid skidding and losing control on slippery roads,
do not downshift into 1 (First) when you are moving
faster than 20 mph (30 km/h).
*
[DR11100(ALL)01/93]
RWARNING
The Anti-Lock Brake System may not prevent brake
lock-up on extremely slippery surfaces.
%*
[DR11200(ALL)01/95]
High water
*
[DR11300(ALL)05/90]
Do not drive through flooded areas unless you are sure that the
water is below the bottom of the wheel hubs.
*
[DR11400(ALL)01/93]
If you must drive through high water, drive slowly. You may
have limited traction or wet brakes so allow extra stopping
distance because your vehicle will not stop as quickly as usual.
File:wndrs.ex
Update:Tue Mar 19 08:18:48 1996

250
*
[DR13700(ALL)01/93]
Vehicle Loading Information
*
[DR13800(ALL)04/95]
Your vehicle's load capacity is designated by weight, not
volume, so you cannot necessarily use all the available space.
Maximum safe vehicle weights as well as tire sizes, rim sizes
and inflation pressures are specified for your vehicle at the
assembly plant on the Safety Compliance Certification Label.
The certification label is located on the pillar in the driver's
door opening.
*
[DR13900(ALL)01/93]
Each additional item of equipment affects how much cargo a
vehicle can carry. If a vehicle is overloaded, performance will
suffer and service concerns may arise.
*
[DR14200(ALL)01/93]
NOTE: The vehicle must not be loaded to both the front and
rear GAWR because the GVWR will be exceeded. The
GAWR of the front and rear axles exceed the GVWR
when added together.
*
[DR14500(ALL)01/93]
Understanding Loading Information
*
[DR14600(ALL)01/93]
There are five terms that are used to describe a vehicle's ability
to carry a load:
*
[DR14700(ALL)01/93]
n
Base Curb Weight
*
[DR14800(ALL)01/93]
n
Payload
*
[DR14900(ALL)01/93]
n
GVW (Gross Vehicle Weight)
*
[DR15000(ALL)01/93]
n
GVWR (Gross Vehicle Weight Rating)
*
[DR15100(ALL)01/93]
n
GAWR (Gross Axle Weight Rating)
*
[DR15200(ALL)06/92]
n
GCWR (Gross Combined Weight Rating)
*
[DR15300(ALL)01/93]
Base Curb Weight
*
[DR15400(ALL)04/95]
The base curb weight is the weight of the vehicle including fuel,
coolants, lubricants, emergency tools and spare wheel and tire.
It also includes any equipment that is standard. It does not
include passengers, cargo or optional equipment installed by
factory, dealer, aftermarket supplier or customer.
File:wndrs.ex
Update:Tue Mar 19 08:18:48 1996

254
*
[DR17800(ALL)11/93]4.
Subtract vehicle actual weight from the GVWR to find out
how much more weight your vehicle can carry.
*
[DR17810(ALL)04/94]5.
Weigh the vehicle again once it is loaded to make sure that
the GVWR and front and rear GAWR's are not exceeded.
%*
[DR18000(ALL)01/93]
Trailer towing table
[DR18050(ALL)08/94]
eight pica
chart:0050061-C[DR18100(ALL)11/93]
If you suspect that your payload is excessive, have your vehicle
weighed at a highway weight station or another appropriate
commercial facility. Fill the fuel tank. Weigh the total vehicle
and trailer (if applicable), then separately weigh the vehicle at
the front and rear wheels. Finally, weigh the trailer separately if
applicable.
*
[DR18200(ALL)01/93]
Trailers
*
[DR18300(ALL)01/93]
Towing a trailer safely means having the proper weight on the
tongue (usually 10-15% of the trailer weight).
*
[DR18400(ALL)07/93]
If your vehicle exceeds the GVWR, remove cargo from your
vehicle accordingly. If your vehicle exceeds either GAWR, shift
the load or remove cargo accordingly.
File:wndrs.ex
Update:Tue Mar 19 08:18:48 1996

258
*
[DR20900(ALL)01/93]
Trailer towing tips
*
[DR21000(ALL)11/89]
Before starting on a trip, practice turning, stopping and backing
in an area away from heavy traffic. Get to know the ªfeelº of
the vehicle/trailer combination.
*
[DR21100(ALL)01/93]
Practice backing up. Back up very slowly, with someone outside
at the rear of your trailer to guide you. Place your hand at the
bottom of the steering wheel and move it in the direction you
want the rear of the trailer to swing. Slight movement of the
steering wheel results in a much larger movement of the rear of
the trailer.
*
[DR21200(ALL)11/89]
When turning, drive slightly beyond the normal turning point
so the trailer wheels will clear curbs or other obstructions.
*
[DR21300(ALL)01/93]
Allow more room for stopping with a trailer attached. Trailer
brakes should be applied first, whether manually or
automatically controlled, when approaching a stop.
*
[DR21400(ALL)01/93]
For an easy-to-operate vehicle/trailer combination, the trailer
tongue load should be approximately 10-15% of the loaded
trailer weight.
*
[DR21500(ALL)02/94]
Make a thorough check of your equipment before starting out
on the road. After you have traveled about 50 miles (80 km),
stop in a protected area and double-check your hitch and
electrical connections. Also check trailer wheel lug nuts for
tightness.
File:wndrs.ex
Update:Tue Mar 19 08:18:48 1996

Driving Your Windstar
259
[DR21600(ALL)10/93]
When stopped in traffic for long periods of time in hot weather,
place the gearshift selector lever in P (Park) to increase the
engine idle speed. This aids in engine cooling and air
conditioner efficiency. If the engine overheats, turn the selector
knob to select the fresh air position to stop the air conditioner
compressor. Increase the engine speed for a short time.
*
[DR21700(ALL)01/93]
Vehicles with trailers should not be parked on a grade.
However, if you must park on a grade, place wheel chocks
under the trailer's wheels as follows:
[DR21800(ALL)11/93]1.
Apply the foot service brake pedal and hold.
*
[DR21900(ALL)11/93]2.
Have another person place the wheel chocks under the
trailer wheels.
[DR22000(ALL)11/93]3.
With the chocks in place, release the foot service brake
pedal, making sure the chocks are holding.
[DR22100(ALL)11/93]4.
Apply the parking brake by pressing the service brake pedal
down firmly with your right foot while applying the parking
brake lever with your right hand.
*
[DR22200(ALL)11/93]5.
Shift the gearshift lever into P (Park).
File:wndrs.ex
Update:Tue Mar 19 08:18:48 1996

260
[DR22300(ALL)11/93]
Complete the following steps to start your vehicle after it has
been parked on a grade:
[DR22400(ALL)11/93]1.
Apply the foot service brake pedal and hold.
*
[DR22500(ALL)11/93]2.
Start the engine.
*
[DR22600(ALL)11/93]3.
Shift the gearshift lever into gear and release the parking
brake.
[DR22700(ALL)11/93]4.
Release the foot service brake pedal and move the vehicle
uphill to free the wheel chocks.
[DR22800(ALL)11/93]5.
Apply the foot service brake pedal and hold while another
person retrieves the chocks.
File:wndrs.ex
Update:Tue Mar 19 08:18:48 1996