1996 FORD EXPLORER window

42
[SR15170( X)06/95]6.
Place child on the child seat cushion. Then position the right
shoulder belt over the child's shoulder as shown in Figure 6.
Insert the right safety belt tongue into the single opening of
the crotch safety belt buckle as shown in Figure 7.
[SR15175( X)06/95]
17-1/2 pica
art:0090177-A
Figure 7: Fastening the crotch safety belt
[SR15180( X)09/95]
NOTE: Read the following steps carefully to become familiar
with the color indicator windows located on each
safety belt tongue and the chest clip. When either of
the tongues or the chest clip is unfastened, the color
red appears. When the tongues and/or the chest clips
are properly fastened, the color green appears.
File:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996

Safety Restraints
43
[SR15185( X)06/95]7.
Position the left shoulder belt over the child's shoulder and
insert the left tongue into the buckle as shown in Figure 8.
The colorgreenmust appear in the color indicator window
on each buckled tongue.
[SR15187( X)06/95]
17-1/2 pica
art:0090176-A
Figure 8: Fastening the crotch safety belt
File:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996

Starting Your Explorer
77
*
[ST10300(ALL)01/95]
Improve your ventilation by keeping all air inlet vents clear of
snow, leaves, and other debris.
*
[ST10400(ALL)08/95]
If the engine is idling while you are stopped in an open area
for long periods of time, open the windows at least one inch
(2.5 cm). Also, adjust the heating or air conditioning system to
bring in outside air.
[ST10650(ALL)03/95]
n
HEATING Ð Set fan speed to medium or high, the function
control knob on any position except OFF and the
temperature control knob on any desired position.
[ST10700(ALL)03/95]
n
AIR CONDITIONING Ð Set fan speed to medium or high
with the function control knob on any position (except OFF
or MAX A/C) and the temperature control knob at a
comfortable level.
File:04unstx.ex
Update:Thu Feb 29 09:22:05 1996

Instrument Panel Controls
115
[IP04800( X)03/95]
17-1/2 pica
art:0090132-A
Electronic automatic temperature control system
*
[IP04850( X)02/95]
To turn your EATC on, push the AUTOMATIC button or any
of the six override buttons along the bottom of the control.
[IP04900( X)03/95]
To turn your EATC off, press the OFF button. When the system
is off, the display window will be blank (dark) when the
ignition is on. The display will also be blank (dark) when the
ignition is off.
*
[IP05000( X)01/95]
If you select AUTOMATIC, the system will automatically
determine fan speed and airflow location. If an override button
is selected, your selection determines airflow location only. Fan
speed remains automatic unless you override it by rotating the
vertical thumbwheel located at the extreme right of the control
panel.
File:06unipx.ex
Update:Thu Feb 29 09:05:45 1996

116
[IP05100( X)03/95]
To change the temperature in the display window, select any
temperature between65ÊF (18ÊC) and 85ÊF (29ÊC)using the
BLUE (cooler) or RED (warmer) buttons. The Electronic
Automatic Temperature Control will do the rest.
[IP05150( X)03/95]
To change the temperature display from ÊF to ÊC or from ÊC to
ÊF, press and hold the MAX A/C and the DEFVbuttons at
the same time for one second.
[IP05200( X)03/95]
If you want continuous maximum cooling, push the BLUE
button until60ÊF (16ÊC) isshown in the display window. Your
EATC will cool at maximum and disregard the60ÊF (16ÊC)
setting until you select a warmer temperature with the RED
button. If you want continuous maximum heating, push the
RED button until90ÊF (32ÊC) isshown in the display window.
Your EATC will provide maximum heat regardless of the90ÊF
(32ÊC) setting until you select a cooler temperaturewith the
BLUE button.
*
[IP05300( X)03/95]
The display window tells you how the system is operating. It
will indicate the selected temperature and the operating function
you have chosen; AUTO or one of the six manual overrides. It
will also indicate manual (thumbwheel) control of the fan speed
with the
Hsymbol. The display window with all possible
displays and their positions are shown here. Normally not all
are shown at the same time but are included here to familiarize
you with the names and symbols.
File:06unipx.ex
Update:Thu Feb 29 09:05:45 1996

Instrument Panel Controls
117
[IP05400( X)03/95]
10-1/2 pica
art:0090125-A*
[IP05500( X)01/95]
Automatic operation
*
[IP05600( X)02/95]
Push the AUTOMATIC button and select the desired
temperature. The selected temperature and AUTO will be shown
in the display window. The EATC will automatically heat or
cool to achieve the set temperature. Under normal conditions,
your EATC will need no additional attention.
[IP05700( X)03/95]
10-1/2 pica
art:0090126-AFile:06unipx.ex
Update:Thu Feb 29 09:05:45 1996

118
[IP05800( X)03/95]
When in AUTOMATIC and weather conditions require heat, air
will be sent to the floor. However, a feature is included in your
EATC to prevent blowing cold air to the floor if the engine
coolant is not warm enough to allow heating. In 3 1/2 minutes
or less, the fan speed will start to increase and the air flow will
be to the floor area.
[IP05900( X)07/94]
If unusual conditions exist (i.e. window fogging, etc.), the six
manual override buttons allow you to select special air
discharge locations. A thumbwheel allows you to adjust the fan
speed to suit your needs.
*
[IP06000( X)03/95]
Temperature selection
[IP06100( X)03/95]
The RED and BLUE buttons at the upper left of the Control are
for temperature selection. The RED button will increase the set
temperature and the BLUE button will lower the set
temperature. Pressing a button and releasing it will change the
set temperature one degree. Holding either button in will
rapidly change the temperature setting in one degree increments
to either65ÊF (18ÊC)(BLUE) or85ÊF (29ÊC)(RED). Then, the set
temperature will jump 5Ê and stop at either60ÊF (16ÊC)which is
maximum cooling or90ÊF (32ÊC)which is maximum heating.
When you select60ÊF (16ÊC) or 90ÊF (32ÊC), the fanwill go to
HI speed for maximum airflow.
File:06unipx.ex
Update:Thu Feb 29 09:05:45 1996

120
[IP06600( X)03/95]
10-1/2 pica
art:0090134-A[IP06700( X)03/95]
When you move the thumbwheel, the fan speed will go to
manual control. The display window will show the
Hsymbol
in the upper left corner along with the selected temperature and
operating function.
[IP06800( X)03/95]
You can override the fan speed at any time. If you use the
thumbwheel to override the fan speed, the EATC will continue
to control the temperature but you control the fan speed. If you
are operating in one of the override functions (FLOOR, MAX
A/C, etc.), automatic fan control will continue unless you rotate
the fan thumbwheel. To return to automatic fan control, press
the AUTOMATIC button. The EATC will return to automatic
operation. If you want to return to any override function, press
the button for that function. The fan speed will continue to be
automatically controlled.
File:06unipx.ex
Update:Thu Feb 29 09:05:45 1996