1996 FORD E SERIES ABS

342
*
[SV46300(BEF )03/95]
Removing the headlamp bulb
*
[SV46400(BEF )01/95]
1. Make sure that the headlamp switch on the
instrument panel is in the OFF position.
[SV46550( E )04/95]
2. Lift the hood and fix in up position using
prop rod.
[SV46600( E )04/95]
3. Bend back slightly and lift up on the two
metal tabs while holding the lamp to vehicle.
This will release the lamp from the installed
position.
[SV46650( E )05/91]
one third page art:0020844-B
Removing/Installing the headlamp bulb
[SV46750( E )04/95]
4. Remove the bulb retaining ring by turning it
1/8 of a turn to free it from the socket. Then
slide the ring off the plastic base. Keep the
ring. You must use it again to hold the new
bulb in place.
[SV46850( E )04/95]
5. Carefully remove the bulb assembly from its
socket by gently pulling it rearward without
turning.
File:14ltsve.ex
Update:Wed Apr 17 08:40:13 1996

343
*
[SV46900(BEF )03/95]
Installing the headlamp bulb
*
[SV47000(BEF )02/95]
1. With the flat side of the bulb's plastic base
facing upward, insert the glass end of the
bulb into the socket. You may need to turn
the bulb left or right to line up the grooves
in the plastic base with the tabs in the
socket. When the grooves are aligned, push
the bulb into the socket until the plastic base
contacts the rear of the socket.
*
[SV47100(BEF )02/95]
2. Slip the bulb retaining ring over the plastic
base until it contacts the rear of the socket.
Lock the ring into the socket by rotating it
clockwise until you feel a ªstopº.
[SV47250( E )12/91]
3. Reposition the three adjuster screws into the
retaining holes and hold while pushing the
two black tabs downward to engage the
ends of the adjuster screws. You will hear a
ªsnapº when the tabs are properly engaged.
Make sure lamp is secured properly by
pulling it forward. If it is loose, remove
lamp and reinstall.
*
[SV47300(BEF )02/95]
4. Turn the headlamps on and make sure that
they work properly. If the headlamp was
correctly aligned before you changed the
bulb, you should not need to align it again.
*
[SV47406( E )02/95]
High-Mount Brakelamp Bulbs
[SV47410( E )03/91]
E-150 Ð E-350 without cargo lamp attached
[SV47420( E )03/91]
To remove/install or replace a bulb:
[SV47430( E )03/91]
1. Remove the two screws that secure the lamp
and lift up from the vehicle.
[SV47440( E )03/91]
2. Remove the socket that contains the
burned-out bulb and replace the bulb.
[SV47450( E )03/91]
3. To install a bulb, reverse the procedures
above.
File:14ltsve.ex
Update:Wed Apr 17 08:40:13 1996

350
*
[SV50800( EFM)01/89]
The following are some of the acts that are
considered tampering:
[SV51000( E )01/89]
q
Removing the hood liner, fender apron
absorbers, fender apron barriers, under body
noise shield or material constructed to absorb
noise output.
*
[SV51100( EFM)01/89]
q
Removing or dismantling the engine speed
governor, so that the engine's speed exceeds
the manufacturer's specifications.
*
[SV51200( EFM)01/89]
q
Removing the air duct, air intake choke or
silencer, air cleaner and/or air cleaner
element.
*
[SV51300( EFM)01/89]
q
Removing or dismantling any of the exhaust
system components including the catalyst
inlet pipe, muffler, outlet pipe, resonator or
diffuser.
*
[SV51400( EFM)01/89]
q
Removing the fan shroud. Removing or
dismantling the fan clutch so that it no longer
functions properly.
*
[SV51450( EFM)04/89]
Maintenance
*
[SV51455( EFM)06/93]
Instructions for maintenance and service of the
noise control system have been included in the
Maintenance Schedule and Recordbooklet and in
the ªGeneral Maintenance Checklist.º To aid the
noise control system throughout the life of the
vehicle, Ford Motor Company recommends that
this vehicle should be operated according to the
Owner's Guide. When installing replacement
parts, use caution not to violate the tampering
act as described above. Use the Maintenance
Record Log to list any inspections and services
performed on the vehicle.
File:14ltsve.ex
Update:Wed Apr 17 08:40:13 1996

Index 379
Brake fluid
brake warning light........... 69
checking and adding......... 326
description.............. 326
specifications............. 326
Brakelamp, high-mount brakelamp . . . 96, 343
Brakes
adjustment.............. 206
anti-lock............... 206
anti-lock brake system (ABS)
warning light............ 70
applying the brakes.......... 212
brake warning light........... 69
fluid, checking and adding...... 326
fluid, refill capacities......... 353
fluid, specifications.......... 326
front disc.............. 206
if brakes do not grip well....... 211
master cylinder............ 326
new brake linings............ 8
noise................ 206
parking............... 212
power braking............ 206
rear anti-lock............. 208
servicing............... 211
stopping distances.......... 212
trailer................ 238
when storing your vehicle....... 363
Brake-shift interlock....... 60,196, 202
Break-in period.............. 8
Brights (high beams)........... 77
Bulbs, replacing............. 340
halogen............... 341
headlamps.............. 341
high-mount brakelamp........ 343
C
Canada, customer assistance....... 268
Canada, warranty information....... 4
Canadian Motor Vehicle Arbitration Plan
(CAMVAP).............. 269
File:ltixe.ex
Update:Wed Apr 17 08:36:26 1996

388 Index
Jump-starting your vehicle
attaching cables............ 245
disconnecting cables.......... 247
K
Keys
key in ignition chime.......... 56
positions of the ignition......... 55
removing from the ignition....... 56
stuck in lock position........55±56
L
Lamps
cargo lamps.............. 94
checking............... 340
courtesy lamps............. 94
daytime running light system...... 93
dome lamps.............. 94
flashing the lamps........... 101
hazard flashers............ 103
headlamps............... 92
high beams.............. 100
high-mount brakelamp...... 96,343
illuminated entry system........ 120
illuminated mirrors.......... 143
instrument panel, dimming....... 94
interior lamps............ 92,94
replacing bulbs............ 340
Lane change indicator (see Turn signal) . . . 99
Lap belts................. 22
Lights, warning and indicator
airbag................. 74
anti-lock brakes (ABS).......... 70
anti-theft................ 75
brake................. 69
charging system............. 74
check engine.............. 71
engine oil pressure........... 76
hazard warning light......... 103
File:ltixe.ex
Update:Wed Apr 17 08:36:26 1996

Index 389
Lights, warning and indicator (continued)
high beam............... 77
overdrive off............. 201
rear ABS................ 70
safety belt............... 71
testing the warning lights........ 58
theft system.............. 75
turn signal indicator.......... 99
Load limits
GAWR................ 218
GVWR................ 218
trailer towing............. 220
Lubricant specifications......... 357
Lug nuts
standard............... 252
tightening sequence.......... 255
Lumbar support, seats.......... 141
M
Maintenance schedule and record
(see separate Maintenance Schedule
and Record booklet).......... 3
Maintenance (see Servicing)....... 279
Master cylinder, brakes......... 326
Mileage, calculating fuel economy.... 295
Mirrors
dual electric remote control...... 146
rearview............... 143
side view mirrors (manual)...... 144
side view mirrors (power)....... 146
vanity mirror............. 143
vanity mirror, illuminated....... 143
Motorcraft parts............. 356
File:ltixe.ex
Update:Wed Apr 17 08:36:26 1996