1996 CADILLAC SEVILLE ignition

Downloaded from www.Manualslib.com manuals search engine A
k
c
Few automobiles are fortunate enough to have the rich heritage
that is Cadillac. The name Cadillac is appropriately that of
Antoine de La Mothe Cadillac, the French military commander
who founded the city of Detroit in 1701. What better name for
the oldest automobile manufacturer in Detroit.
Henry M. Leland, known as the master of precision,
initiated his precision manufacturing techniques at the
founding of Cadillac in 1902. His exacting standards
prompted the motto
by which Cadillac has been guided
over the years
- “Craftsmanship A Creed - Accuracy
A Law.”
The introduction
of the first four cylinder engine in 1905
led the industry and enabled Cadillacs to travel at speeds
up to
50 mph.
For attention to quality ana Innovation,
the Royal
Automobile Club of England awarded the prestigious
Dewar Trophy to Cadillac twice . . . first in 1908 for
achieving perfect interchangeability of parts and again
for introducing the electric self starter, electric lighting
and ignition system on 191
2 models. Cadillac is the
only American manufacturer to win this honor and
the only manufacturer
in the world to win it twice. As
commonplace as standardized parts are today, in 1908
parts were still individually hand fitted both in
production and service.
V

Downloaded from www.Manualslib.com manuals search engine L
#--
Memory Seat (Option)
Adjust the driver’s seat to a
comfortable position and
then press the
SET button.
Within five seconds, press
button
“1 .” A second
seating position may be
programmed by repeating
the above steps and pressing
button
“2” instead of
Note that each time a memory button is pressed a single
beep will sound through the radio.
If your vehicle is in PARK (P), you can recall a seating
position by briefly pressing button
1 or 2. This will
adjust
the seat to where you have previously
programmed it.
If you have accidently pressed one
of the memory recall buttons and want to stop seat
movement, press one
of the manual seat control buttons.
This cancels a memory seat recall.
c
c
You can also recall a seat position if your vehicle is not
in PARK
(P). Press and hold either the 1 or 2 button until seat movement
is complete.
Releasing the buttons
will stop seat adjustment.
The
EXIT button can be programmed to allow easy exit
for up to two driver’s. Adjust the seat to a comfortable
“exit” position and press the SET button followed by
the EXIT button. Within five seconds, press button
1.
A second exit position may be programmed by repeating
the above steps and pressing button
2 instead of button
1. Be aware that the exit recall does not remember any
recline positions.
While your vehicle is in PARK
(P), briefly press the
EXIT button followed by either the
1 or 2 button to
recall your programmed exit position. The exit position
may also be recalled
if the vehicle is not in PARK (P) by
briefly pressing the
EXIT button and then pressing and
holding either the
1 or 2 button until seat movement is
complete. Releasing the buttons will stop seat
adjustment.
Automatic seat movement will occur if the Remote
Keyless Entry
(RKE) transmitter is used to enter the
vehicle. The number on the back
of the transmitter
corresponds to the
1 or 2 seat position. After the unlock
button is pressed on the RKE transmitter and the key is
placed in
the ignition and turned on, the seat will
automatically adjust to the appropriate position.
1-3

Downloaded from www.Manualslib.com manuals search engine Heated Front Seat (Option)
. .x ,,
The control is located in the
center console. Move the
switch to
LO or HI to turn on
the heating elements in the
seat. The
LO setting warms
the seatback and cushion
until the seat approximates
body temperature. The
HI
setting heats the seat to a
slightly higher temperature.
A telltale light in the control reminds you that the
heating system is in use.
The heated seats can only be
used when the ignition is turned on.
1-4

Downloaded from www.Manualslib.com manuals search engine c
L-
o c
c
0
c
c
bag system. If you don’t get them, the air bag system
won’t be
there to help protect you in another crash.
A new system will include air bag modules and
possibly other parts. The service manual for your
vehicle covers the need to replace other parts.
Your vehicle
is equipped with a crash sensing and
diagnostic module., which records information about
the air bag system. The module records information
about the readiness
of the system, when the sensors
are activated and driver’s safety belt usage at
deployment,
Let only qualified technicians work on your air bag
system. Improper service can mean that your air bag
system won’t work properly. See your dealer for
service.
NOTICE:
If you damage the cover for the driver’s air bag,
it may not work properly.
You may have to
replace the air bag module.
Do not open or break
the air bag cover.
Servicing Your Air Bag-Equipped Cadillac
Air bags affect how your Cadillac should be serviced.
There are parts of the air bag system in several places
around your vehicle. You don’t want the system
to
inflate while someone is working on your vehicle. Your
Cadillac dealer and the Cadiliac service manual have
information about servicing your vehicle and the air bag system.
To purchase a service manual, see “Service and
Owner Publications” in the Index.
A CAUTION:
For up to 10 seconds after the ignition key is
turned off and the battery is disconnected, an air
bag can still inflate during improper service.
You
can be injured if you are close to an air bag when
it inflates. Avoid wires wrapped with yellow tape
or yellow connectors. They
are probably part of
the air bag system. Be sure to follow proper
service procedures, and make sure the person
performing work for you
is qualified to do so.
The air bag system does not need regular maintenance.
1-25

Downloaded from www.Manualslib.com manuals search engine ,-L- -*-,
Section 2 Features and Controls
Here you can learn about the many standard and optional
features on your Cadillac, and information on starting,
shrfting and braking. Also explained are the instrument
panel
and the warning systems that tell you if everything is
working properly -- and what to do if you have a problem.
Keys
A CAUTION:
Leaving young children in a vehicle with the
ignition key
is dangerous for many reasons. A child
or others could be badly injured
or even killed.
They could operate power windows or other
controls or even
make the vehicle move. If they
turned the ignition to
on and moved the shift
lever out
of PARK (P), that would release the
parking brake. Don't leave the keys in
a vehicle
with young children.
3:
yl . . . . . ,.
2-1

Downloaded from www.Manualslib.com manuals search engine The square key is for the
ignition only. It has a
resistor pellet which is part
of the vehicle's
PASS-Key@II system.
The oval key is
for the
doors and all other locks. When
a new
Cadillac is delivered, the dealer removes
the plug from the door key. The plug has
a code on it
that tells the dealer or a qualified locksmith how to
make extra keys. The ignition key has a bar code tag
attached to it rather than
a knock out plug. Your dealer
or qualified locksmith can make extra ignition keys by
reading the bar code tag.
There are
15 alternative ignition PASS-Key I1 blanks to
help discourage theft. Keep the bar code tag and the
door key plugs in a safe place. If you lose your keys,
you will be able
to have new ones made using the plug
or bar code tag.
NOTICE:
Your Cadillac has a number of new features that
can help prevent theft.
You can have a lot of
trouble getting into your vehicle if you ever lock
your keys inside and
you may have to damage
your vehicle to get in.
Be sure you have extra keys.

Downloaded from www.Manualslib.com manuals search engine Power Door Locks
-
Automatic Door Locks
Close your doors and turn on the ignition. Every time
you move the shift lever out of PARK (P) all of the
doors will lock. The doors will unlock every time you
stop the vehicle and move the shift lever into PARK
(P).
If someone needs to get out while your vehicle is not in
PARK (P), have that person use the manual or power
lock. When the door is closed again, it will not lock
automatically. Use the manual or power lock to lock the
door again.
I Programmable Automatic Door Locks
?. >?& ;'* .%, >,." '..2 " I . z7.,.e-,- rr ' ' . . + .*.',,:a@??%* .._:.*A< With the ignition in the RUN position, the door locks
can be programmed through the Driver Information Center
(DIC) to allow the driver to choose various lock 1 P -
Press the power door lock switch to lock or unlock both
doors
at once. settings.
Press the
RESET button to answer "yes" and
press the
INFO button to indicate a "no" response.
2-4

Downloaded from www.Manualslib.com manuals search engine When you want to open a rear door when the security
lock
is on:
1. Unlock the door from the inside.
2. Then open the door from the outside.
To cancel the rear door lock:
1. Unlock the door from the inside and open the door
from the outside.
2. Move the lever all the way down.
3. Do the same for the other rear door.
The rear door locks will now work normally.
Anti-Lockout Feature
Leaving your key in any ignition position with the
driver’s door open will disable the use
of the power door
lock switches. The anti-lockout feature is disabled when
the ignition
is on. If you close the door, you can lock it
using the Keyless Entry system. It is always
recommended that you remove your ignition key when
locking your vehicle.
Note that this feature is only available with
the driver’s
door open.
Also note that the anti-lockout feature can be overridden
by holding the power door lock switch for three seconds
or longer.
Leaving Your Vehicle
If you are leaving the vehicle, open the door, set the
locks from the inside. get out and dose the door.