42-62
- Remove bolts (arrows) at front cross member for rear final drive.
CAUTION!
Be careful not to damage the edge of the wheelhousing. - Remove four subframe bolts (arrows).
- Slowly lower subframe together with rear final drive.
Pa
ge 28 of 32 Rear axle, servicin
g (all-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.3
42-64
- Align exhaust system free of stress:
Repair Manual, Engine Mechanical, Repair
Group 26
- Replace four subframe bolts and washers.
Installation position of washers: ribbed side
facing upward
Tightening torques
Component/location
Tightening
torque
Subframe to body 110 Nm (81 ft
lb) + 1/4-turn
(90 )1) Suspension strut mounting
bracket to body 55 Nm (41 ft
lb)
Drive shaft to rear final
drive M8 55 Nm (41 ft
lb)
Rear final drive front
crossmember to body M10 40 Nm (30 ft
lb)
Rear final drive front
crossmember (with
exhaust system bracket)
to body M8 20 Nm (15 ft
lb)
Pa
ge 31 of 32 Rear axle, servicin
g (all-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.3
