48-61
CAUTION!
Mark the running direction before removing. Reinstalling a used belt
in reversed running direction could damage the belt. Fig. 3 Loosening and removing ribbed belt
- Using 17 mm hex wrench, turn clockwise (arrow) to loosen ribbed belt.
- Align holes -A- and -B-.
- Insert 3204 drift to lock tensioner in position.
- Remove ribbed belt from belt pulley.
The ignition wires are numbered from 1 to 6: Fig. 4 Assignment of ignition wires to ignition coils
A - Ignition coil for cylinders 5 and 3
B - Ignition coil for cylinders 4 and 2
C - Ignition coil for cylinders 6 and 1
- Connect ignition wires 5 and 3 to ignition coil -A-.
- Connect ignition wires 4 and 2 to ignition coil -B-.
- Connect ignition wires 6 and 1 to ignition coil -C-.
Pa
ge 20 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9
