1996 AUDI A4 steering

48-56


Power steering pump (6-cyl. engine),
removing and installing

Notes:

Always replace seals.
Do not reuse hydraulic fluid.
The power steering system uses hydraulic fluid,
Part No. G 002 000.
System hydraulic fluid capacity: approx. 1 liter
(1 qt).
1 -
Pressure line with hose
2 -
Bolt
8 Nm (71 in. lb)
3 -
Plate with mounting hole At intake manifoldFor mounting line - 1 -
4 -
Power steering pump Fill with hydraulic fluid before installing
Notes, page 48
-27

Pa
ge 14 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9

48-57


5 -
Belt pulley
6 -
Socket-head bolts
25 Nm (18 ft lb)Counterhold using VAG1590 (if applicable)
while loosening and tightening
7 -
Bolts 25 Nm (18 ft lb)
8 -
Socket-head bolts 25 Nm (18 ft lb)
9 -
Power steering pump bracket
10 -
Ignition coils with bracket
11 -
Socket-head bolt 25 Nm (18 ft lb)
12 -
Banjo bolt 40 Nm (30 ft lb)
13 -
Seals 16 x 22 Always replace
14 -
Seal 18 x 24 Always replace6 cyl. 2V gasoline engine only
Pa
ge 15 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9

48-58


Removing 15 -
Line union
50 Nm (37 ft lb)Vehicles with V6 2V gasoline engineVehicles with power steering pump: FP-3
16 -
Clamp Always replaceUse VAG1275 to tighten
17 -
Bolts 25 Nm (18 ft lb)
18 -
Slotted bushing
19 -
Socket-head bolt 25 Nm (18 ft lb)
20 -
Bracket
21 -
Suction line with hose
22 -
Bolt 8 Nm (71 in. lb)
- Unclip and remove engine cover Fig.
1 .
-
Unbolt and remove cover for ribbed belt
Pa
ge 16 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9