39-35
Adjustment and marking of final drive gear
sets
1 -
Identification "0937" signifies an Oerlikon
gear set with a ratio of 37:9
2 -
Pairing number (312) of final drive gear
set
3 -
Deviation (tolerance) "r" is based on the
test machine master gauge used during
production. The deviation "r" is always
given in 1/100 mm. Example: 25 signifies r
= 0.25 mm
Ro - Length of test machine master gauge
used
Ro - For 170 mm (6.69 in.) diameter ring
gear = 54.95 mm (2.16 in.)
R - Actual dimension between ring gear
axis and face of pinion shaft in position
of quietest running for this gear set.
Vo - Hypoid offset
Pa
ge 3 of 10 Front final drive rin
g gear and
pinion shaft, ad
justin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.6
