CHASSIS AND BODY
39
REPAIR SUNROOF ELECTRIC MOTORS
Service repair no - 76.82.84/85
FRONT MOTOR
Remove
1.Disconnect battery negative lead.
2.Ensure sunroof is in normally closed position
NOTE: If the electric motor has failed the
sunroof can be closed manually using an
allen key to turn motor spindle A.
3.Remove switch panel from stowage pocket
panel
4.Remove interior lamp from stowage pocket
panel
5.Remove alarm ultrasonic unit.
6.Unscrew ten fixings and remove stowage pocket
from headlining.
7.Disconnect motor wiring multiplug.
8.Remove three screws and motor.
Refit
9.Reverse removal procedure.
CAUTION: Ensure the motor is aligned
with fixing holes and the sunroof is in the
normally closed position. DO NOT rotate
the motor drive spindle in the rack - this may
result in incorrect operation of the sunroof.REAR MOTOR
Remove
1.Disconnect battery negative lead.
2.Ensure sunroof is in normally closed position
NOTE: If the electric motor has failed the
sunroof can be closed manually using an
allen key to turn motor spindle.
3.Remove headlining.
See headlining.
4.Disconnect motor wiring multiplug.
5.Remove three screws and motor.
Refit
6.Reverse removal procedure.
CAUTION: Ensure the motor is aligned
with fixing holes and the sunroof is in the
normally closed position. DO NOT rotate
the motor drive spindle in the rack - this may
result in incorrect operation of the sunroof.
76CHASSIS AND BODY
42
REPAIR SUNROOF REGULATOR MANUAL
Service repair no - 76.83.03/04
FRONT
Remove
1.Ensure sunroof is in normally closed position.
2.Remove retaining screw and regulator handle.
3.Remove switch panel from stowage pocket
panel
4.Remove interior lamp from stowage pocket
panel
5.Remove alarm ultra sonic unit.
6.Unscrew ten fixings and remove stowage pocket
from headlining.
7.Remove two retaining screws and regulator from
clamping frame.
Refit
8.Reverse removal procedure.
CAUTION: Ensure the regulator is aligned
with fixing holes and the sunroof is in the
normally closed position. DO NOT rotate
the regulator spindle in the rack - this may result
in incorrect operation of the sunroof.REAR
Remove
1.Ensure sunroof is in normally closed position.
2.Remove retaining screw and regulator handle.
3.Remove headlining.
See headlining.
4.Remove two retaining screws and regulator from
clamping frame.
Refit
5.Reverse removal procedure.
CAUTION: Ensure the regulator is aligned
with fixing holes and the sunroof is in the
normally closed position. DO NOT rotate
the regulator spindle in the rack - this may result
in incorrect operation of the sunroof.
