1995 LAND ROVER DISCOVERY instrument panel

ELECTRICAL
1
REPAIR FUSE BOX - INTERIOR
Right Hand Drive shown
The interior fusebox is fitted below the steering column, behind the trim panel. It comprises of three integral units.
'A'Main fusebox,'B'Satellite 2,'C'Satellite 1.
A label in the fusebox cover shows the circuits protected, the fuse rating and their locations. Access is by
releasing the fixing screws and lowering the panel.
'A' Main fusebox
1. Stop lights, direction indicators
2. LH side light
3. Radio/cassette/CD player
4. RH headlight main beam
5. LH headlight main beam
6. Cigar lighter
7. Airbag SRS
8. RH side lights
9. Rear fog guard lights
10. RH headlight dipped beam
11. LH headlight dipped beam
12. Multi-function unit
13. Ignition feed for Multi-function unit
14. Instruments, reversing lights
15. Air conditioning, windows
16. Washers & wipers - front
17. Starter, glow plug
18. Wash/wipe - rear, mirrors, cruise control
'B' Satellite 2
1. Electric windows - front
2. Electric windows - rear
3. Anti-lock braking
4. Central door locking
5. Electric sun roof
6. Trailer lights
'C' Satellite 1
1. Anti-theft alarm
2. Headlight washers
3. Engine management
4. Anti-lock brakes
5. Anti-theft alarm
6. Rear air conditioning, heater
'D' Spare fuses (5 off)

86ELECTRICAL
28
REPAIR INSTRUMENT PANEL FINISHER
Service repair no - 88.20.03
Remove
1.Position steering wheel for access.
2.Remove 2 screws securing panel.
3.Lift panel clear, disconnect multiplug
connections.
Refit
4.Reverse removal procedure.

ELECTRICAL
29
REPAIR INSTRUMENT BINNACLE
Service repair no - 88.20.13
Remove
1.Remove instrument panel finisher.
See
Instrument panel finisher
2.Remove 4 screws securing binnacle to fascia.
3.Carefully ease 2 lower panel finisher brackets
downwards.
4.Withdraw binnacle to gain access to multiplugs.
5.Noting their fitted positions, disconnect
multiplugs.
6.Remove binnacle.
Refit
7.Reverse removal procedure.

86ELECTRICAL
40
REPAIR INSTRUMENT ILLUMINATION ELECTRONIC
DIMMER/RHEOSTAT
Service repair no - 86.65.07
Electronic dimming control switch is located in
instrument panel finisher. Rotate control to vary
intensity of illumination.
Remove
1.Disconnect the battery negative lead.
2.Remove instrument panel finisher.
See
CHASSIS AND BODY, Repair, Instrument
Panel Finisher
3.Remove 2 screws securing rheostat, remove
rheostat.
Refit
4.Reverse removal procedure.WINDOW LIFT/HEATED SEAT CUSHION
SWITCHES AND BULBS
Service repair no - 86.25.16 - Switches
Service repair no - 86.45.29 - Bulb
Switch Replacement
1.Disconnect the battery negative lead.
2.Carefully release rear of surround from centre
console.
3.Remove screws, pry window lift switch surround
from glove box.
4.Disconnect multi-plug(s) at rear of switch(es).
5.Apply pressure to rear of switch, push it through
surround.
Bulb replacement
6.Identify bulb to be replaced and remove
appropriate switch.
7.Rotate bulb holder 90°and withdraw it from
switch; discard bulb and holder.
Refit
8.Reverse removal procedure.

86ELECTRICAL
44
REPAIR BONNET SWITCH
Service repair no - 86.55.89
Remove
1.Remove 2 bolts securing sounder, move
sounder aside.
2.Locate and disconnect bonnet switch multiplug.
3.Release and remove switch.
Refit
4.Reverse removal procedure.ULTRASONIC SENSOR
Service repair no - 86.77.32
Remove1.Release sensor from switch panel.
2.Disconnect multiplug and remove sensor.
Refit
3.Reverse removal procedure.
ANTI-THEFT ALARM INDICATOR LIGHT (96
MODELS)
Service repair no - 86.45.61
See Instrument illumination and warning light
bulbs
ENGINE IMMOBILISATION WARNING LIGHT (96
MODELS)
Service repair no - 86.45.61
See Instrument illumination and warning light
bulbs