Downloaded from www.Manualslib.com manuals search engine 6. Connect the red positive (+) cable to the positive (+) terminal of the
vehicle with the dead battery.
Dead Battery (+) Good Battery (+)
7. Don’t let the other end touch metal. Connect it to the \
positive (+)
8. Now connect the black negative (-) cable to the good battery’s negative
terminal
of the
good battery.
(-) terminal.
Don’t let the other end touch anything until the next step. The other end
of the negative cable doesn’t go to the dead battery. It goes to a heavy
unpainted metal
art on the engine of the vehicle with the dead battery.
5-5
Downloaded from www.Manualslib.com manuals search engine Good Battery (-) Heavy Metal Engine Part
9. Attach the cable at least 18 inches (45 cm) away from the dead battery,
but
not near engine parts that move. The electrical connection is just as
good there, but the chance of sparks getting back to the batt\
ery
is much
less.
10. Now start the vehicle with the good battery and run the engin\
e for a
11. Try to start the vehicle with the dead battery. If it won’t start after a few
while.
tries make sure all connections are good.
If it still won’t start, it
probably needs service.
12. Remove the cables in reverse order to prevent electrical shorti\
ng. Take
care that they don’t touch each other or any other metal.
Remove Cables In This Order:
3 2
2 1. Heavy Metal
Engine Part
2. Good Battery (-)
3. Good Battery (+)
4. Dead Battery (+)
5-6
