Page 10 of 342
Downloaded from www.Manualslib.com manuals search engine Vehicle Symbols
These are some of the symbols you will find on your vehicle. For example,
these symbols are used
on an original battery:
A
17
Caurron
Possible
Injury
Protect Eyes Caustic Battery Acid Spark or Flame Could
by Shielding Could
Cause Burns Explode Battery
Avoid Sparks
or Flames
These symbols are important for you and your passengers whenever your
vehicle is driven:
Qe
-I I
Fasten Safety Door LocWUnlock
Belts
vi
Page 14 of 342
Downloaded from www.Manualslib.com manuals search engine Manual Front Seat
The bucket seats can
be adjusted forward or
rearward by the lever
at the front
of the seat.
Move the seat adjustment
lever at the front of the seat towards the driver's
door
to unlock it. Slide the seat to where you want it. Then release the lever
and try to move the seat with your body,
to make sure the seat is locked into
place.
Power Driver's Seat
You can adjust the seat before entering the vehicle.
The front control makes the front of the seat go up and down.
The rear control makes the rear of the seat
go up and down.
The center control
makes the whole seat go up and down or forward and
rearward.
1-2
Page 27 of 342

Downloaded from www.Manualslib.com manuals search engine How to Wear Safety Belts Properly
Adults
This part is only for people of adult size.
Be aware that there are special things to know about safety belts and
children. And there are different rules for smaller children and babies. If
a
child will be riding in your vehicle, see the part of this manual called
“Children.” Follow those rules for everyone’s protection.
First, you’ll want to
know which restraint systems your vehicle has.
We’ll start with the driver position.
Driver Position
This part describes the driver’s restraint system.
Lap-Shoulder Belt
The driver has a lap-shoulder belt. Here’s how to wear it properly.
1. Close and lock the door.
2. Adjust the seat (to see how, see “Seats” in the Index) so you can sit up
straight.
3. Pick up the latch plate and pull the belt across you. Don’t let it get
4. Push the latch plate into the buckle until it clicks.
twisted.
Pull up
on the latch plate to make sure it is secure.
If the belt
isn’t long enough, see “Safetv Belt Extender” at the end of
this section.
1-15
Page 56 of 342
Downloaded from www.Manualslib.com manuals search engine The square-shaped
key is
for the ignitic
only.
3n
The oval-shaped key
is for the doors and
all
other locks.
2-2
Page 61 of 342
Downloaded from www.Manualslib.com manuals search engine ..^
To fully open the
doors, push in on the
clip and lift the check
assembly up off the
mounting bracket.
Do
this on each door.
Replace the assemblies
the same
way.
See the caution under “Swing-Out Windows” in this section.
Door Locks
A CAUTION:
Unlocked doors can be dangerous.
2-7
Page 62 of 342
Downloaded from www.Manualslib.com manuals search engine There are several ways to lock and unlock your vehicle:
From
the outside: Use
your door key.
From the inside:
To
lock front doors and sliding side door, slide
the lock levers down.
To unlock the front
doors and the sliding
side door from the
inside: Slide the lock
levers up.
Rear doors cannot be manually locked from the inside.
To unlock the rear hatch and Dutch doors from the inside: Push the top of
the
HATCH REL switch.
2-8
Page 63 of 342

Downloaded from www.Manualslib.com manuals search engine Rear Hatch and Dutch Doors Release
If you have this option, your vehicle must be in either PARK (P) or
NEUTRAL
(N) to release the hatch and unlock the Dutch doors. If your
battery is dead, the hatch and doors will not open, even from the outside
with a key.
To release the hatch
and unlock the doors
from the inside of the
vehicle, press the
HATCH REL switch
on the instrument
panel. It is located on
the driver’s side of the
steering column. The
hatch will release with
or without the key in
the ignition.
Then, pull up on the hatch handle and open the doors.
To release the hatch using the optional Keyless Entry hand held transmitter,
see “Keyless Entry System” in the Index.
To release the hatch
and unlock the doors
from the outside of the
vehicle, put the key in
the lock and turn
clockwise. Then, pull
up on the hatch and
open the right rear
door first. Grasp the
handle and pull the
door open.
The hatch and doors will automatically lock when
the hatch is shut.
If the hatch is partially closed, the rear doors will lock and you will need to
use the key or HATCH
REL switch to unlock them.
Also, see the Caution under “Swing Out Windows”, located in this section.
2-9
Page 64 of 342

Downloaded from www.Manualslib.com manuals search engine Power Door Locks
If your vehicle has
power door locks,
push the power door
lock switch to lock or
unlock all the doors at
once.
The power door lock switch will not lock or unlock the rear hatch and Dutch
doors.
You must use the HATCH REL switch. See “Rear Hatch and Dutch
Doors Release’’ in this section.
Every vehicle with power door locks has
a pulse lock system. A pulse lock
system works like this:
If the sliding door is open and you push the power door lock switch, the
sliding door will not lock immediately. After
you close the door, the system
comes on and, in about five seconds, locks the sliding door.
All models have overriding door locks. When
a door is locked, the door
handle will not work the latch. This will help stop a door from being
accidentally opened. However, power door locks do
not affect the operation
of the hatch.
Leaving Your Vehicle
If you are leaving the vehicle, take your keys, open your door and set the
locks from inside. Then get
out and close the door.
Keyless Entry System
If your vehicle has this option, you can lock and unlock your doors or hatch
from up to
30 feet (9 m) away using the key chain transmitter supplied with
your vehicle.
Your Keyless Entry System operates on a radio frequency subject to Federal
Communications Commission (FCC) Rules.
2- 10