13-36
Sealing flange and
flywheel/drive plate, removing
and installing Note:
Servicing clutch:
Repair Manual, 5 Spd. Manual Transmission
012/01W Front Wheel Drive, Repair Group 30
Repair Manual, 5 Spd. Manual Transmission
01A All Wheel Drive, Repair Group 30
1 -
Oil seal
To remove, remove oil seal carrier, item -
15 - Install using 10-203Lightly oil lip of seal
2 -
Woodruff key Check for proper installation
3 -
Connecting bolt 25 Nm (18 ft lb)
4 -
Front oil seal flange Before installing oil pan, spread sealant
AMV174 004 01 on joint between oil seal
flange and cylinder block.
Pa
ge 1 of 11 Sealin
g flan
ge and fl
ywheel/drive
plate, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.2
13-38
10 -
Bolt
10 Nm (7 ft lb)
11 -
Rear oil seal flange With oil sealReplace as complete unitLightly oil lip of sealBefore installing oil pan, spread sealant
AMV 174 004 01 on joint between oil seal
flange and cylinder block
12 -
Oil seal Replacing Page 13
-39
13 -
Intermediate shaft
Axial play, max: 0.25 mm (0.010 in.)
14 -
O-ring Always replace
15 -
Oil seal carrier for intermediate shaft
Pa
ge 3 of 11 Sealin
g flan
ge and fl
ywheel/drive
plate, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.2
13-41
Installing
- Lightly oil lip of oil seal.
- Place guide sleeve from 3083 arbor on crankshaft.
- Slide oil seal over guide sleeve.
Note: - Press in oil seal to stop together with pressure bushing and bolt from
3083 arbor.
- Replace bolt for toothed belt gear.
- Install toothed belt gear for crankshaft and secure using 3099 spur belt
spreading.
Contact surface between toothed belt gear and crankshaft must be
free of oil. Do not grease crankshaft bolt for toothed belt gear.
- Install toothed belt (adjust valve timing) Page 13
-32
.
Pa
ge 7 of 11 Sealin
g flan
ge and fl
ywheel/drive
plate, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.2
