1995 AUDI A6 01E Transmission Housing Service Workshop Manual

34-142


Dimension a = 105 mm Fig. 15 Insertion depth of needle bearing

Fig. 16 Removing circlip
- Lift circlip out of groove by turning one end of circlip with a screwdriver
-A-.
- Secure this end with a screwdriver -B-.
- Pry circlip out further by repositioning screwdriver -A-.
Pa
ge 17 of 21 Transmission housin
g, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.10

34-143


Fig. 17 Installation position of oil baffle plate for transmission DSY
1 - Breather
2 - Oil baffle plate
3 - Selector shaft
Pa
ge 18 of 21 Transmission housin
g, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.10

34-144


Selector shaft (complete), disassembling
and assembling

1 -
Selector cylinder
2 -
Roll pin
Drive out and drive in flush Fig. 1
3 -
Selector shaft
Driving out Fig. 2Driving in Fig. 3Installation position: flat (arrow) and
selector finger - 4 - face in same direction
4 -
Selector finger Observe installation position to - 3 -
5 -
Cam for reversing light switch
Pa
ge 19 of 21 Transmission housin
g, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.10

34-145


Fig. 1 Driving out and driving in roll pin flush
A - Drift
B - Vice clamps

Fig. 2 Driving out selector shaft
A - Drift
B - Vice clamps
Pa
ge 20 of 21 Transmission housin
g, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.10

34-146


Note: Fig. 3 Driving in selector shaft
A - Wooden block
Bring holes into alignment.Flat on selector shaft and selector finger point in same direction.
Pa
ge 21 of 21 Transmission housin
g, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.10