Page 53 of 79

01-98
 Diagnostic Trouble Code (DTC) table  Output on printer of VAG1551 
Scan Tool (ST)  Possible cause  
Corrective action  
DTC    
  
00000  
No malfunction recognized!       
If this display appears, process 
is concluded. No DTCs are 
stored in DTC memory.  
If corresponding warning lamps 
light up anyway, check the 
following points:  
Voltage supply for ABS control module -J104- 
below 10.5 volts at a vehicle speed less than 6 
km/h. Open circuit in activation wire for ABS warning 
light -K47- between ABS control module (w/EDL) -
J104- and instrument cluster combination 
processor -J218-. - See section "Overview of 
indicator lamp functions" 
   If no malfunction can be found, and there is still a 
problem, there may be a mechanical malfunction (e.g. 
solenoid valve sticking).  - Expand troubleshooting to 
include "Electrical test", function 
test  page 01
-68
 . 
Pa
ge 53 of 79 Read Measurin
g Value Block 
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8 
         
        
        
     
        
        Page 54 of 79

01-99
 
Output on printer of 
VAG1551 Scan Tool 
(ST)  Possible cause  
Corrective action  
DTC       
00257        
Left front ABS inlet 
valve -N101-   
Open circuit, short circuit to B+ or Ground (GND) 
in wiring between ABS hydraulic unit -N55- and 
ABS control module -J104-. 
 Left front ABS inlet valve -N101- malfunctioning - Carry out "electrical test", steps 1 + 13   
page 01
-68
 . 
- If the electrical test does not reveal any 
malfunctions, check all wiring and 
connectors for loose contacts. 
- If no problems are found after 
implementing the specified steps, replace 
the control module. 
00259        
Right front ABS inlet 
valve -N99-   
Open circuit, short circuit to B+ or Ground (GND) 
in wiring between ABS hydraulic unit and ABS 
control module -J104-. 
 Right front ABS inlet valve -N99- malfunctioning. - Carry out "electrical test", steps 2 +14   
page 01
-68
 . 
- If the electrical test does not reveal any 
malfunctions, check all wiring and 
connectors for loose contacts. 
- If no problems are found after 
implementing the specified steps, replace 
the control module. 
Pa
ge 54 of 79 Read Measurin
g Value Block 
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8 
         
        
        
     
        
        Page 55 of 79

01-100
 
Output on printer of 
VAG1551 Scan Tool 
(ST)  Possible cause  
Corrective action  
DTC       
00265        
Left front ABS outlet 
valve -N102-   
Open circuit, short circuit to B+ or Ground (GND) 
in wiring between ABS hydraulic unit and ABS 
control module -J104-. 
 Left front ABS outlet valve -N102- malfunctioning. - Carry out "Electrical test", step 1   page 
01
-68
 . 
- If the electrical test does not reveal any 
malfunctions, check all wiring and 
connectors for loose contacts. 
- If no problems are found after 
implementing the specified steps, replace 
the control module. 
00267        
Right front ABS outlet 
valve -N100-   
Open circuit, short circuit to B+ or Ground (GND) 
in wiring between ABS hydraulic unit and ABS 
control module -J104-. 
 Right front ABS outlet valve -N100- 
malfunctioning - Carry out "Electrical test", step 2   page 
01
-68
 . 
- If the electrical test does not reveal any 
malfunctions, check all wiring and 
connectors for loose contacts. 
- If no problems are found after 
implementing the specified steps, replace 
the control module. 
Pa
ge 55 of 79 Read Measurin
g Value Block 
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8 
         
        
        
     
        
        Page 56 of 79

01-101
 
Output on printer of 
VAG1551 Scan Tool 
(ST)  Possible cause  
Corrective action  
DTC       
00273        
Right rear ABS inlet 
valve -N133-   
Open circuit, short circuit to B+ or Ground (GND) 
in wiring between ABS hydraulic unit and ABS 
control module -J104-. 
 Right rear ABS inlet valve -N133- malfunctioning - Carry out "electrical test", steps 4 +16   
page 01
-68
 . 
- If the electrical test does not reveal any 
malfunctions, check all wiring and 
connectors for loose contacts. 
- If no problems are found after 
implementing the specified steps, replace 
the control module. 
00274        
Left rear ABS inlet 
valve -N134-   
Open circuit, short circuit to B+ or Ground (GND) 
in wiring between ABS hydraulic unit and ABS 
control module -J104-. 
 Left rear ABS inlet valve -N134- malfunctioning - Carry out "electrical test", steps 3 +15   
page 01
-68
 . 
- If the electrical test does not reveal any 
malfunctions, check all wiring and 
connectors for loose contacts. 
- If no problems are found after 
implementing the specified steps, replace 
the control module. 
Pa
ge 56 of 79 Read Measurin
g Value Block 
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8 
         
        
        
     
        
        Page 57 of 79

01-102
 
Output on printer of 
VAG1551 Scan Tool 
(ST)  Possible cause  
Corrective action  
DTC       
00275        
Right rear ABS outlet 
valve -N135-   
Open circuit, short circuit to B+ or Ground (GND) 
in wiring between ABS hydraulic unit and ABS 
control module -J104-. 
 Right rear ABS outlet valve -N135- 
malfunctioning. - Carry out "Electrical test", step 4   page 
01
-68
 . 
- If the electrical test does not reveal any 
malfunctions, check all wiring and 
connectors for loose contacts. 
- If no problems are found after 
implementing the specified steps, replace 
the control module. 
00276        
Left rear ABS outlet 
valve -N136-   
Open circuit, short circuit to B+ or Ground (GND) 
in wiring between ABS hydraulic unit and ABS 
control module -J104-. 
 Left rear ABS outlet valve -N136- malfunctioning - Carry out "Electrical test", step 3   page 
01
-68
 . 
- If the electrical test does not reveal any 
malfunctions, check all wiring and 
connectors for loose contacts. 
- If no problems are found after 
implementing the specified steps, replace 
the control module. 
Pa
ge 57 of 79 Read Measurin
g Value Block 
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8 
         
        
        
     
        
        Page 58 of 79

01-103
 
Output on printer of 
VAG1551 Scan Tool 
(ST)  Possible cause  
Corrective action  
DTC       
00283        
Left front ABS wheel 
speed sensor -G47-  
or:   
ABS wheel speed sensor rotor dirty or 
damaged. 
 Excessive wheel bearing play.
 Left rear ABS wheel speed sensor -G47- 
installed incorrectly. 
 ABS wheel speed sensor -G47- 
malfunctioning. 
 Short circuit to Ground (GND). Repair Manual, Brake System, Repair Group 45
   
 Repair Manual, Suspension, Wheels, Steering, 
Repair Group 40
   
 Repair Manual, Brake System, Repair Group 45
    - Check rotor, clean or replace
- Replace wheel bearing- Check installation of ABS wheel speed sensor.- "Read measuring value block" display group 1   
page 01
-63
 . 
- Carry out "Electrical test", step 7   page 01
-68
 .
- If neither the "Read measuring value block" 
function nor the "electrical test" reveal any 
malfunctions, check all wiring and harness 
connectors for loose contacts. 
Left front ABS wheel 
speed sensor -G47-   
Incorrect control module version.- Check control module version   page 01
-52
 .
Pa
ge 58 of 79 Read Measurin
g Value Block 
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8 
         
        
        
     
        
        Page 59 of 79
Open circuit/short 
circuit to B+   
Open circuit or short circuit to B+ in wiring 
between ABS wheel speed sensor -G47- 
and ABS control module -J104-. - If no problems are found after implementing the 
specified steps, replace the control module. 
Pa
ge 59 of 79 Read Measurin
g Value Block 
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8 
         
        
        
     
        
        Page 60 of 79

01-104
 
Output on printer of 
VAG1551 Scan Tool 
(ST)  Possible cause  
Corrective action  
DTC       
00285        
Right front ABS 
wheel speed sensor -
G45-  
or:   
ABS wheel speed sensor rotor dirty or 
damaged. 
 Excessive wheel bearing play.
 Left rear ABS wheel speed sensor -G45- 
installed incorrectly. 
 ABS wheel speed sensor -G45- 
malfunctioning. 
 Short circuit to Ground (GND). Repair Manual, Brake System, Repair Group 45
   
 Repair Manual, Suspension, Wheels, Steering, 
Repair Group 40
   
 Repair Manual, Brake System, Repair Group 45
    - Check rotor, clean or replace
- Replace wheel bearing- Check installation of ABS wheel speed sensor.- "Read measuring value block", display group 1   
page 01
-63
 . 
- Carry out "Electrical test", step 8   page 01
-68
 .
- If neither the "Read measuring value block" 
function nor the "electrical test" reveal any 
malfunctions, check all wiring and harness 
connectors for loose contacts. 
Right front ABS 
wheel speed sensor - 
Incorrect control module version.- Check control module version   page 01
-52
 .
Pa
ge 60 of 79 Read Measurin
g Value Block 
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8