19-7
Filling
Note:
The cooling system is filled all year round with a
mixture of water and an antifreeze/corrosion
protection agent.
Only use coolant additive G 012 A8 D meeting
specification TL VW 774 D. Identification color:
red
CAUTION!
G 012 A8 D and other coolant additives
cannot be mixed. Otherwise, serious damage
to the engine may result.
If the fluid in the expansion tank is brown, this
means G 012 A8 D has been mixed with
another type of coolant. In this case, flush out
the cooling system and fill with fresh coolant. To
flush the system, fill it with clean water and run
the engine for about 2 minutes. This should
remove as much of the old coolant as possible.
G 012 A8 D and coolant additives marked
"meeting specification TL VW 774 D" prevent
frost and corrosion damage and stop scaling
while at the same time raising the boiling point
of the coolant. For these reasons the cooling
Pa
ge 8 of 38 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.19.1
