1994 TOYOTA CAMRY system

11 2
LIGHT AUTO TURN OFF*1 : 1MZ±FE
*
2 : 5S±FE
1
IE IG OFF
TAIL
HE AD A 2A3
A 1A4
LIGHT
CONTROL SW
11213 7WB
G±R
R±B
R G
R±Y R±GB
B
W±B
W±B
10A
GAUGE
Q
Q S
R R
S
DOOR COURTESY SW
FRONT L H
100A ALT
BATTERY FL MAIN
2. 0L
W
FROM POWER SOURCE SYSTEM(
SEE PAGE 64)
FUSE B OX
D12COMBINATION SW C12 FROM POWER SOURCE SYSTE
(
SEE PAGE 64)
2X X X
X
1113
1
1
I13A
1234C12
B
F10
C F16A
F10 (
*1)
(
*2) EF1 1
B 1A 1
C 1(
*1)
(
*2)
B F1 0 , F1 0
AC,F16
BLACK
I13A
INTEGRATION RELAY1 D12
1M 1101H 26
1C 1
1
M1E 4
1B 8TAILLIGHT
RELAY 15
3 2
TO TAIL
FUSE2H 2
2G 72G2
HEADLIGHT
RELAY
20A
DOME
42
31
TO HEAD
FUSE

11 3
WITH THE IGNITION SW TURNED ON, THE CURRENT FLOWS TO TERMINAL 7 OF THE INTEGRATION RELAY THROUGH GAUGE FUSE.
VOLTAGE IS APPLIED AT ALL TIMES TO TERMINAL (A) 2 OF THE INTEGRATION RELAY THROUGH THE TAILLIGHT RELAY (COIL SIDE),
AND TO TERMINAL (A) 3 THROUGH THE HEADLIGHT RELAY (COIL SIDE).
1. NORMAL LIGHTING OPERATION
(TURN TAILLIGHT ON)
WITH LIGHT CONTROL SW TURNED TO TAILLIGHT POSITION, A SIGNAL IS INPUT INTO TERMINAL (A) 1 OF THE INTEGRATION
RELAY. ACCORDING TO THIS SIGNAL, THE CURRENT FLOWING TO TERMINAL (A) 2 OF THE RELAY FLOWS FROM TERMINAL (A) 1 "
TERMINAL 2 OF THE LIGHT CONTROL SW " TERMINAL 11 " TO GROUND AND TAILLIGHT RELAY CAUSES TAILLIGHT TO TURN ON.
(TURN HEADLIGHT ON)
WITH LIGHT CONTROL SW TURNED TO HEADLIGHT POSITION, A SIGNAL IS INPUT INTO TERMINALS (A) 1 AND (A) 4 OF THE
INTEGRATION RELAY. ACCORDING TO THIS SIGNAL, THE CURRENT FLOWING TO TERMINAL (A) 3 OF THE RELAY FLOWS TO
TERMINAL (A) 4 " TERMINAL 13 OF THE LIGHT CONTROL SW " TERMINAL 11 " TO GROUND IN THE HEADLIGHT CIRCUIT, AND
CAUSES TAILLIGHT AND HEADLIGHT RELAY TO TURN THE LIGHT ON. THE TAILLIGHT CIRCUIT IS SAME AS ABOVE.
2. LIGHT AUTO TURN OFF OPERATION
WITH LIGHTS ON AND IGNITION SW TURNED OFF (INPUT SIGNAL GOES TO TERMINAL 7 OF THE RELAY), WHEN DOOR ON DRIVER'S
SIDE IS OPENED (INPUT SIGNAL GOES TO TERMINAL 6 OF THE RELAY), THE RELAY OPERATES AND THE CURRENT IS CUT OFF
WHICH FLOWS FROM TERMINAL (A) 2 OF THE RELAY TO TERMINAL (A) 1 IN TAILLIGHT CIRCUIT AND FROM TERMINAL (A) 3 TO
TERMINAL (A) 4 IN HEADLIGHT CIRCUIT. AS A RESULT, ALL LIGHTS ARE TURNED OFF AUTOMATICALLY.
I13 INTEGRATION RELAY
7±GROUND : APPROX. 12 VOLTS WITH IGNITION SW AT ON POSITION
1±GROUND : ALWAYS APPROX. 12 VOLTS
(A)3±GROUND : APPROX. 12 VOLTS WITH LIGHT CONTROL SW AT OFF OR TAIL POSITION
(A)2±GROUND : APPROX. 12 VOLTS WITH LIGHT CONTROL SW AT OFF POSITION
6±GROUND : CONTINUITY WITH FRONT LH DOOR OPEN
(A)4±GROUND : CONTINUITY WITH LIGHT CONTROL SW AT HEAD POSITION
(A)1±GROUND : CONTINUITY WITH LIGHT CONTROL SW AT TAIL OR HEAD POSITION
10±GROUND : ALWAYS CONTINUITY
: PARTS LOCATION
CODESEE PAGECODESEE PAGECODESEE PAGE
C1232F10A28 (1MZ±FE), 30 (5S±FE)F16C28 (1MZ±FE), 30 (5S±FE)
D1234 (S/D), 35 (C/P), 36 (W/G)F10B28 (1MZ±FE), 30 (5S±FE)I13A33
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CODESEE PAGEJUNCTION BLOCK AND WIRE HARNESS (CONNECTOR LOCATION)
1B
1C20COWL WIRE AND J/B NO. 1 (INSTRUMENT PANEL LEFT)
1E
20COWL WIRE AND J/B NO. 1 (INSTRUMENT PANEL LEFT)
1H20FLOOR NO. 1 WIRE J/B NO. 1 (INSTRUMENT PANEL LEFT)
1M20COWL WIRE AND J/B NO. 1 (INSTRUMENT PANEL LEFT)
2G22COWL WIRE AND J/B NO. 2 (ENGINE COMPARTMENT LEFT)
2H22ENGINE WIRE AND J/B NO. 2 (ENGINE COMPARTMENT LEFT)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CODESEE PAGEJOINING WIRE HARNESS AND WIRE HARNESS (CONNECTOR LOCATION)
EF138 (1MZ±FE)ENGINE WIRE AND COWL WIREEF140 (5S±FE)ENGINE WIRE AND COWL WIRE
: GROUND POINTS
CODESEE PAGEGROUND POINTS LOCATION
IE42LEFT KICK PANEL
IG42INSTRUMENT PANEL BRACE LH
SYSTEM OUTLINE
SERVICE HINTS

11 8
TURN SIGNAL AND HAZARD WARNING LIGHT (W/G)
2F 2
2 1
2 1
IE EB BL EA IG11
1
I7 I7
I11
I11
ED1 4
IJ1 2
Bb1 4 F37956 581
3
3 3 B
44 B F10 8
12 2
1
ED1 1 FROM POWER SOURCE SYSTEM(
SEE PAGE 64)
OFF
ONRH
LH TURN HAZARD10A
HAZ
G±Y
G±B
L
W G±R
G±BG±W
G±B
G±Y G±B
G±YW±B W±B
G±B
G±Y
G±Y
W±BG±B G±B
G±Y
W±B
W±B W±BW±BW±B W±B W±B
HAZARD SWTURN SIGNAL SW
[COMB. SW]
REAR TRUN SIGNAL LIGHT LH
[REAR COMB. LIGHT LH]FRONT TURN SIGNAL
LIGHT LH
REAR TURN SIGNAL LIGHT RH
[REAR COMB. LIGHT RH]
G±B
G±Y
TURN SIGNAL
FL AS HER
TURN SIGNAL
INDICATOR LIGHT
[COMB. METER]
FRONT TURN SIGANL
LIGHT RH F7
R8
R10
F8
C8 J1
J1
C12
H7
JUNCTION
CONNECTOR
JUNCTION
CONNECTOR
LH RH
G±Y
G±W G±B
G±B
G±W
G±Y G±Y
G±Y
C C
W±B
JUNCTION
CONNECTOR J5
BQ
1A 2 TURN
1A 4
1H 16
1C 8
1M 5
1C 11
1M 1
3D 6
3C 18
7. 5A

120
STOP LIGHT (S/D, C/P)
A
DE LA Y
HOLD
BOBL BO 3 2
3 2 BZ19
Ba11
BZ17 Ba15
2
23 C
21786 C
11
2 2
554
11IJ 1 17
BZ13 BZ1 2
Ba1 4 G±W
G±R G±R G±RG±W
G±R
W±B
W±B W±B
W±B
W±BY±G
W±BY±G
W±B G±W
G±R G±R
G±R W±B
W±B
W±B W±B
W±B
W±B W±BR G±W
Y±G R±L R±LY
LIGHT FAILURE SENSORREA R LIGHT WARNING
INDICATOR LIGHT
[COMB. METER]JUNCTION
CONNECTOR
Y G±R
G±R
W±B
W±B
HIGH MOUNT
STOP LIGHTHIGH MOUNT
STOP LIGHT STOP LIGHT RH
[REAR COMB. LIGHT] STOP LIGHT LH
[REAR COMB. LIGHT] STOP LIGHT RH
[REAR COMB. LIGHT RH] STOP LIGHT LH
[REAR COMB. LIGHT LH]
J1
C9
H10H10 R11 R9 R10 R8
L2
R
(
W/O REAR SPOILER)
(
W/ REAR SPOILER) BZ14G±WG±W G±W
BZ18
RSTOP LIGHT
SW
G±R
G±W
1 2
S10B1 A 2
B 2B1 NOISE FILTER
(
FOR STOP L I GHT) N2 , N3A
G±W
G±W
B10 : S/D
B26 : C/P
B13 : S/D
B28 : C/P
B12 : S/D
B28 : C/P
B16 : S/D
B29 : C/P
B10 : S/D
B25 : C/P B16 : S/D
B29 : C/P
B9:S/D
B25 : C/PB17 : S/D
B29 : C/P
B14 : S/D
B28 : C/P
1B 6 1M 31H9GAUGE STOP
1M 6
1H 17
FROM POWER SOURCE SYSTEM(
SEE PAGE 64)
10A 15A

121
CURRENT IS APPLIED AT ALL TIMES THROUGH A STOP FUSE TO TERMINAL 2 OF THE STOP LIGHT SW.
WHEN THE IGNITION SW IS TURNED ON, CURRENT FLOWS FROM THE GAUGE FUSE TO TERMINAL 8 OF THE LIGHT FAILURE
SENSOR, AND ALSO FLOWS THROUGH THE REAR LIGHT WARNING LIGHT TO TERMINAL 4 OF THE LIGHT FAILURE SENSOR.
STOP LIGHT DISCONNECTION WARNING
WHEN THE IGNITION SW IS TURNED ON AND THE BRAKE PEDAL IS PRESSED (STOP LIGHT SW ON), IF THE STOP LIGHT CIRCUIT IS
OPEN, THE CURRENT FLOWING FROM TERMINALS 7 OF THE LIGHT FAILURE SENSOR TO TERMINALS 1, 2 CHANGES, SO THE
LIGHT FAILURE SENSOR DETECTS THE DISCONNECTION AND THE WARNING CIRCUIT OF THE LIGHT FAILURE SENSOR IS
ACTIVATED.
AS A RESULT, THE CURRENT FLOWS FROM TERMINAL 4 OF THE LIGHT FAILURE SENSOR " TERMINAL 11 " GROUND AND TURNS
THE REAR LIGHT WARNING LIGHT ON. BY PRESSING THE BRAKE PEDAL, THE CURRENT FLOWING TO TERMINAL 8 OF THE LIGHT
FAILURE SENSOR KEEPS THE WARNING CIRCUIT ON HOLD AND THE WARNING LIGHT ON UNTIL THE IGNITION SW IS TURNED OFF.
S10 STOP LIGHT SW
2±1 : CLOSED WITH BRAKE PEDAL DEPRESSED
L 2 LIGHT FAILURE SENSOR
1, 2, 7±GROUND : APPROX. 12 VOLTS WITH STOP LIGHT SW ON
4, 8±GROUND : APPROX. 12 VOLTS WITH IGNITION SW AT ON POSITION
11±GROUND : ALWAYS CONTINUITY
: PARTS LOCATION
CODESEE PAGECODESEE PAGECODESEE PAGE
C 932N 2A33R1034 (S/D), 35 (C/P)
H1034 (S/D), 35 (C/P)N 3B33R1134 (S/D), 35 (C/P)
J 133R 834 (S/D), 35 (C/P)S1033
L 234 (S/D), 35 (C/P)R 934 (S/D), 35 (C/P)
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CODESEE PAGEJUNCTION BLOCK AND WIRE HARNESS (CONNECTOR LOCATION)
1B20COWL WIRE AND J/B NO. 1 (INSTRUMENT PANEL LEFT)
1H20FLOOR NO. 1 WIRE J/B NO. 1 (INSTRUMENT PANEL LEFT)
1M20COWL WIRE AND J/B NO. 1 (INSTRUMENT PANEL LEFT)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CODESEE PAGEJOINING WIRE HARNESS AND WIRE HARNESS (CONNECTOR LOCATION)
IJ142FLOOR NO. 1 WIRE AND COWL WIRE
BZ146 (S/D)LUGGAGE ROOM NO 1 WIRE AND FLOOR NO 1 WIREBZ148 (C/P)LUGGAGE ROOM NO. 1 WIRE AND FLOOR NO. 1 WIRE
Ba146 (S/D)FLOOR NO 1 WIRE AND LUGGAGE ROOM NO 2 WIREBa148 (C/P)FLOOR NO. 1 WIRE AND LUGGAGE ROOM NO. 2 WIRE
: GROUND POINTS
CODESEE PAGEGROUND POINTS LOCATION
46 (S/D)
BL48 (C/P)UNDER THE LEFT QUARTER PILLARBL
50 (W/G)
UNDER THE LEFT QUARTER PILLAR
BQ50 (W/G)LOWER BACK PANEL CENTER
: SPLICE POINTS
CODESEE PAGEWIRE HARNESS WITH SPLICE POINTSCODESEE PAGEWIRE HARNESS WITH SPLICE POINTS
B 946 (S/D)FLOOR NO 1 WIREB1746 (S/D)LUGGAGE ROOM NO. 2 WIRE
B1046 (S/D)FLOOR NO. 1 WIREB2548 (C/P)FLOOR NO 1 WIREB12B2648 (C/P)FLOOR NO. 1 WIRE
B1346 (S/D)LUGGAGE ROOM NO. 1 WIREB2848 (C/P)LUGGAGE ROOM NO. 1 WIRE
B14
46 (S/D)LUGGAGE ROOM NO. 1 WIRE
B2948 (C/P)LUGGAGE ROOM NO. 2 WIRE
B1646 (S/D)LUGGAGE ROOM NO. 2 WIRE
SYSTEM OUTLINE
SERVICE HINTS

124
STOP LIGHT (W/G)
A
DELAY
HOLD
BL4 2
4 2 B36B38
B38 Bd25
23 C
21786 C
1
1 1
334IJ1 17
G±R G±R G±R
W±B
Y±G
G±R G±R
G±R W±B
W±B
W±B R
Y±G R±L R±LY
LIGHT FA ILURE SE NSORREA R LIGHT
WARNING LIGHT
[COMB. METER]JUNCTION
CONNECTOR
G±R
G±R
W±B
W±B
HIGH MOUNT
STOP LIGHT STOP LIGHT RH
[REAR COMB. LIGHT RH] STOP LIGHT LH
[REAR COMB. LIGHT LH] STOP LIGHT RH
[REAR COMB. LIGHT RH] STOP LIGHT LH
[REAR COMB. LIGHT LH]
J1
C9
R11 R9 R10 R8
L2
R
G±W
RSTOP LIGHT
SW
G±R
G±W
2 1
S10B1 A 2
B 2B1 NOISE FILTER
(
FOR STOP LIGHT) N2 ,N3A
G±W
G±R
CC
C 11
W±B
BR
W±B
Bb1 6
H10
JUNCTION
CONNECTOR J5
BQBc24 Bc25
Bd24
G±R+
±
1B 6 1M 31H910A
GAUGE 15A
STOP
1M 6
1H 17
FROM POWER SOURCE SYSTEM(
SEE PAGE 64)

125
CURRENT IS APPLIED AT ALL TIMES THROUGH A STOP FUSE TO TERMINAL 2 OF THE STOP LIGHT SW.
WHEN THE IGNITION SW IS TURNED ON, CURRENT FLOWS FROM THE GAUGE FUSE TO TERMINAL 8 OF THE LIGHT FAILURE
SENSOR, AND ALSO FLOWS THROUGH THE REAR LIGHT WARNING LIGHT TO TERMINAL 4 OF THE LIGHT FAILURE SENSOR.
STOP LIGHT DISCONNECTION WARNING
WHEN THE IGNITION SW IS TURNED ON AND THE BRAKE PEDAL IS PRESSED (STOP LIGHT SW ON), IF THE STOP LIGHT CIRCUIT IS
OPEN, THE CURRENT FLOWING FROM TERMINALS 7 OF THE LIGHT FAILURE SENSOR TO TERMINALS 1, 2 CHANGES, SO THE
LIGHT FAILURE SENSOR DETECTS THE DISCONNECTION AND THE WARNING CIRCUIT OF THE LIGHT FAILURE SENSOR IS
ACTIVATED.
AS A RESULT, THE CURRENT FLOWS FROM TERMINAL 4 OF THE LIGHT FAILURE SENSOR " TERMINAL 11 " GROUND AND TURNS
THE REAR LIGHT WARNING LIGHT ON. BY PRESSING THE BRAKE PEDAL, THE CURRENT FLOWING TO TERMINAL 8 OF THE LIGHT
FAILURE SENSOR KEEPS THE WARNING CIRCUIT ON HOLD AND THE WARNING LIGHT ON UNTIL THE IGNITION SW IS TURNED OFF.
S10 STOP LIGHT SW
2±1 : CLOSED WITH BRAKE PEDAL DEPRESSED
L 2 LIGHT FAILURE SENSOR
1, 2, 7±GROUND : APPROX. 12 VOLTS WITH STOP LIGHT SW ON
4, 8±GROUND : APPROX. 12 VOLTS WITH IGNITION SW AT ON POSITION
11±GROUND : ALWAYS CONTINUITY
: PARTS LOCATION
CODESEE PAGECODESEE PAGECODESEE PAGE
C 932L 236 (W/G)R 936 (W/G)
H1036 (W/G)N 2A33R1036 (W/G)
J 133N 3B33R1136 (W/G)
J 536 (W/G)R 836 (W/G)S1033
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CODESEE PAGEJUNCTION BLOCK AND WIRE HARNESS (CONNECTOR LOCATION)
1B20COWL WIRE AND J/B NO. 1 (INSTRUMENT PANEL LEFT)
1H20FLOOR NO. 1 WIRE J/B NO. 1 (INSTRUMENT PANEL LEFT)
1M20COWL WIRE AND J/B NO. 1 (INSTRUMENT PANEL LEFT)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CODESEE PAGEJOINING WIRE HARNESS AND WIRE HARNESS (CONNECTOR LOCATION)
IJ142FLOOR NO. 1 WIRE AND COWL WIRE
Bb150 (W/G)LUGGAGE ROOM NO. 1 WIRE AND FLOOR NO. 1 WIRE
Bc250 (W/G)BACK DOOR NO. 1 WIRE AND FLOOR NO. 1 WIRE
Bd250 (W/G)BACK DOOR NO. 1 WIRE AND BACK DOOR NO. 2 WIRE
: GROUND POINTS
CODESEE PAGEGROUND POINTS LOCATION
46 (S/D)
BL48 (C/P)UNDER THE LEFT QUARTER PILLARBL
50 (W/G)
UNDER THE LEFT QUARTER PILLAR
BQ50 (W/G)LOWER BACK PANEL CENTER
BR50 (W/G)BACK DOOR CENTER
: SPLICE POINTS
CODESEE PAGEWIRE HARNESS WITH SPLICE POINTSCODESEE PAGEWIRE HARNESS WITH SPLICE POINTS
B3650 (W/G)FLOOR NO. 1 WIREB3850 (W/G)BACK DOOR NO. 2 WIRE
SYSTEM OUTLINE
SERVICE HINTS

128
ILLUMINATION
TAILLIGHT RELAY
5±3 : CLOSED WITH LIGHT CONTROL SW AT TAIL OR HEAD POSITION (WHEN LIGHT AUTO TURN OFF SYSTEM IS OFF)
CLOSED WITH ENGINE RUNNING AND PARKING BRAKE LEVER RELEASED (CANADA)
R 7 RHEOSTAT
3±2 : APPROX. 12 VOLTS WITH RHEOSTAT FULLY TURNED COUNTERCLOCKWISE AND 0 VOLTS WITH FULLY TURNED CLOCKWISE
: PARTS LOCATION
CODESEE PAGECODESEE PAGECODESEE PAGE
A12B32E 632J 233
A1832F10A28 (1MZ±FE), 30 (5S±FE)O 533
B6A32F10B28 (1MZ±FE), 30 (5S±FE)R 2C33B 6B32F16C28 (1MZ±FE), 30 (5S±FE)R 3A33
C 532G 333R 4B33
C 8A32G 433R 533
C 9B32H 733R 733
C1132H 8A33
C1232I1333
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CODESEE PAGEJUNCTION BLOCK AND WIRE HARNESS (CONNECTOR LOCATION)
1B
1D20COWL WIRE AND J/B NO 1 (INSTRUMENT PANEL LEFT)1E20COWL WIRE AND J/B NO. 1 (INSTRUMENT PANEL LEFT)
1L
3C24COWL WIRE AND J/B NO 3 (BEHIND COMBINATION METER)3D24COWL WIRE AND J/B NO. 3 (BEHIND COMBINATION METER)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CODESEE PAGEJOINING WIRE HARNESS AND WIRE HARNESS (CONNECTOR LOCATION)
EF138 (1MZ±FE)ENGINE WIRE AND COWL WIREEF140 (5S±FE)ENGINE WIRE AND COWL WIRE
II242INSTRUMENT PANEL WIRE AND COWL WIRE
IM142INSTRUMENT PANEL WIRE AND CONSOLE BOX WIREIM242INSTRUMENT PANEL WIRE AND CONSOLE BOX WIRE
IN142INSTRUMENT PANEL WIRE AND SWITCH WIRE
: GROUND POINTS
CODESEE PAGEGROUND POINTS LOCATION
IE42LEFT KICK PANELIF42LEFT KICK PANEL
: SPLICE POINTS
CODESEE PAGEWIRE HARNESS WITH SPLICE POINTSCODESEE PAGEWIRE HARNESS WITH SPLICE POINTS
I 9I1644INSTRUMENT PANEL WIREI1244COWL WIREI1744INSTRUMENT PANEL WIRE
I14
44COWL WIRE
SERVICE HINTS