~~
~~ CHECK OR
SERVICE
Brake System
[nspection
WHAT TO DO
Inspect the complete system. Inspect
brake lines and hoses for proper
hookup, binding, leaks, cracks,
chafing, etc. Inspect disc brake pads for
wear and rotors for surface condition.
Also inspect drum brake linings for
wear and cracks. Inspect other brake
parts, including drums, wheel
cylinders, calipers, parking brake, etc.
Check parking brake adjustment. You
may need to have your brakes inspected
more often
if your driving habits or
conditions result
in frequent braking.
NOTE: A low brake fluid level can
indicate worn disc brake pads which
may need to be serviced.
Also, if the
brake system warning light stays on or
comes on, something may be wrong with the brake system. See “Brake
System Warning Light”
in the Index. If
your anti-lock brake system warning
light stays on or comes on, something
may be wrong with the anti-lock brake
system. See “Anti-Lock
Brake System
Warning Light”
in the Index.
Section D: Recommended Fluids and
Lubricants
NOTE: Fluids and lubricants identified below by name, part
number or specification may be obtained from your GM dealer.
USAGE
Engine Oil
Engine Coolant
Hydraulic Brake System
FLUID/LUBRICANT
API service SH or SG Energy
Conserving
I1 oils of the proper viscosity.
The
“SH’ or “SG’ designation may be
shown alone or in combination with
others, such as “SH/CD,” “SH,SG,CD,”
“SG/CD,” etc.
To determine the preferred
viscosity for your vehicle’s engine,
see
“Engine Oil” in the Index.
50/50 mixture of water (preferably
distilled) and good quality ethylene
glycol base antifreeze (GM Part
No.
1052753 or equivalent) conforming to
GM Specifications 1825M or approved
recycled coolant conforming
to GM
Specification 1825M.
Delco Supreme ll@ Brake Fluid (GM
Part
No. 1052535 or equivalent DOT-3
brake fluid).
261 ...
ProCarManuals.com
