P ANTILOCK BRAKE SYSTEM (ABS) TROUBLESHOOTING GUIDE Troubleshooting Guide with ABS Tester ABS tester ADAPTER PART No.0000-42-0010 HYDRAULIC UNIT CONNECTOR POSSlTlVE BATTERY 97UOPX469 Connecting ABS tester 1. Turn the ignition switch OFF. 2. Connect the SST harness to an extension harness, and wrap the connection with electrical tape to prevent short- ing. 3. Connect the SST between the hydraulic unit wiring har- ness connectors and to the positive battery terminal. 4. Roll back the carpet and remove the protecter. 5. Connect the ABS tester to the control unit connector at harness side .using the adaptor. Warning Driving the vehicle while the tester is connected to the ABS control unit is extremely dangerous. The brakes could fail, resulting in death or seri- / -1 ous injury. Disconnect the tester from the ABS control unit before driving the vehicle. Gartner Banana
u GENERAL SERVICE INFORMATION TIEDOWN HOOK - FRONT /'-- TIEDOWN HOOK - REAR -?-A TOWING Proper towing equipments are necessary to prevent damage to the vehicle during any towing operation. Laws and regulations applicable to vehicles in tow must always be observed. Release the parking brake, place the shift lever in neutral, and set the ignition switch in the ACC posi- tion. As a rule, towed vehicles should be pulled with the driving wheels off the ground. WITH MANUAL TRANSMISSION If the transmission, rear axle, and steering system are not damaged, the vehicle may be towed on all four wheels. If any of these components are damaged, use a towing dolly. CAUTION The power assist for the brakes and steering are inoperable while the engine is off. Do not use the tiedown hooks under the front or rear of the vehicle for towing. These hooks are designed ONLY for transport tiedown. If the tiedown hooks are used for towing, the front or rear skirt and bumper will be damaged. IDENTIFICATION NUMBER LOCATIONS VEHICLE IDENTIFICATION NUMBER (VIN) ENGINE MODEL AND NUMBER L i Gartner Banana
