1994 MAZDA MX-5 window

F CONTROL SYSTEM B+: Battery positive voltage Abnormal voltage Possible cause Terminal 1 v Connection to Neutral switch malfunction (Refer to page F-157) Clutch switch malfunction (Refer to page F-156) Short circuit in wiring from PCME terminal 1 V to neutral or clutch switch Neutral switch malfunction (Refer to page F-157) 0 Clutch switch malfunction (Refer to page F-156) 0 Open circuit in wiring from PCME terminal 1 V to neutral or clutch switch Poor connection at PCME connector 0 ParWneutral switch malfunction (Refer to section K) 0 Short circuit in wiring from parWneutral switch to PCME terminal 1V 0 ParWneutral switch malfunction (Refer to section K) 0 Open circuit in wiring from parWneutral switch to PCME terminal 1 V Always OV Neutral switchlClutch switch (MT) Always B+ Always OV ParWneutral switch (AT) Always B+ Poor contact at ground terminal 0 Open circuit in wiring from PCME to ground Sround More than OV Crankshaft position sensor (SGT-signal) Always OV or approx. 5V Always below 2V or 4V Refer to Code No.03 troubleshooting (Refer to page F-84) Refer to code No.08 Troubleshooting (Refer to page F-86) 0 Short circuit in wiring from PCME terminal 2H to data link connector terminal TEN Mass airflow sensor Always OV Data link connector (Terminal TEN) 0 Open circuit in wiring from PCME terminal 2H data link connector terminal TEN 0 Open circuit in wiring from data link connector terminal GND to around Always B+ Igniter EGR function sensor Always OV Always approx. OV or approx. 5v Refer to Code No.01 troubleshooting (Refer to paae F-83) 0 Refer to Code No.16 Troubleshooting (Refer to page F-89) 0 Short circuit in wiring from PCME terminal 2K tothrottle position sensor, PCME, or mass airflow sensor Poor connection at PCME connector PCME malfunction Vre f Always OV lllumination light ON when rear window defroster switch ON Open or short circuit in wiring from rear window de- froster switch to PCME terminal 2L Always below 1 .ov Rear window defroster switch Open circuit in wiring from ignition switch to rear win- dow defroster switch Rear window defroster switch malfunction (Refer to section T) lllumination light never ON Open circuit in wiring from PCME terminal 2M to throttle position sensor 0 Open circuit in wiring from PCME terminal 2K to throttle position sensor 0 Open circuit in wiring from PCME terminal 20 to throttle position sensor Always constant Throttle position sensor Alwavs above 1V 0 Throttle position sensor misadjustment Refer to Code No.15 troubleshooting (Refer to page F-88) OV after warm-up Heated oxygen sensor Always approx, 1V after warm-up 0 Refer to Code No.17 troubleshooting (Refer to page F-90) Refer to Code No.08 troubleshooting (Refer to page F-86) Mass airflow sensor Always OV or approx. 5V Gartner Banana

Before beginning any service procedure. refer to section T of this manual for air bag system service warnings and audio antitheft system alarm conditions . BODY INDEX ............................. S- 2 HOOD ............................. S- 5 COMPONENTS ................... S- 5 DOOR ............................. S- 7 COMPONENTS ................... S- 7 WINDOW REGULATOR. GLASS. AND GUIDE ....................... S- 9 COMPONENTS ................... S- 9 ......... DOOR LOCK AND OPENER S-15 ................... COMPONENTS S-15 TRUNK LID ........................ S-16 COMPONENTS ................... S-16 .... TRUNK LID LOCK AND OPENER S-18 COMPONENTS ................... S-18 ......... POWER WINDOW SYSTEM S-19 .............. STRUCTURAL VIEW S-19 TROUBLESHOOTING ............. S-20 ........ b POWER WINDOW SWITCH S-22 ... POWER WINDOW REGULATOR S-22 ......... FUEL-FILLER LID OPENER S-23 COMPONENTS ................... S-23 FRONT BUMPER ................... S-24 COMPONENTS ................... S-24 REAR BUMPER .................... S-25 COMPONENTS ................... S-25 ........... MOLDING AND GARNISH S-27 COMPONENTS ................... S-27 OUTSIDE MIRROR ................. S-30 STRUCTURAL VIEW .............. S-30 ............. TROUBLESHOOTING S-31 POWER OUTSIDE MIRROR ....... S-33 POWER OUTSIDE MIRROR SWITCH ........................ S-33 COMPONENTS ................... S-34 WINDSHIELD WIPER AND WASHER . S-35 TROUBLESHOOTING ............. S-35 WIPER MOTOR .................. S-38 ................ WASHER MOTOR S-38 FRONT WIPER AND WASHER ........................ SWITCH S-38 ................... COMPONENTS S39 WINDSHIELD ...................... S-44 PREPARATION ................... S-44 ................... COMPONENTS S-44 REAR WINDOW GLASS ......... (DETACHABLE HARDTOP) S-48 PREPARATION ................... S48 ................... COMPONENTS S48 REAR WINDOW .............. (CONVERTIBLE TOP) S-52 ................... COMPONENTS S-52 ....... DASHBOARD AND CONSOLE S-56 ................... COMPONENTS S56 TRIM .............................. S-59 COMPONENTS ................... S-59 ................. FLOOR COVERING S-62 ................... COMPONENTS -21 SEAT BELT ........................ S-63 COMPONENTS ................... S-63 ...................... SEAT BELT S-64 ................ BUCKLE SWITCH S-64 SEAT .............................. S-65 ................... COMPONENTS S-65 ................ CONVERTIBLE TOP S-67 PREPARATION ................... S-67 ................... COMPONENTS S-67 ........... DETACHABLE HARDTOP S-81 COMPONENTS ................... S-81 BRACE BAR ....................... S-84 ................... COMPONENTS S-84 ......... UNDERBODY DIMENSIONS S-85 PROJECTED DIMENSIONS ........ S-85 ..... STRAIGHT-LINE DIMENSIONS S-87 45uoSx-001 Gartner Banana

INDEX INDEX 1. Hood Removal I lnstallation . . . . . . . page S- 5 2. Door Removal I lnstallation . . . . . . . page S- 7 Adjustment . . . . . . . . . . . . . . . . page S- 8 3. Window regulator, glass, and guide Removal I lnstallation . . . . . . . page S- 9 Adjustment . . . . . . . . . . . . . . . . page S-10 4. Door lock and opener Removal I lnstallation . . . . . . . page S-15 5. Front bumper Removal I lnstallation . . . . . . . page S-24 6. Molding and garnish Removal I lnstallation . . . . . . . page S-27 7. Outside mirror Structural view . . . . . . . . . . . . . page S-30 Troubleshooting . . . . . . . . . . . . page S-31 lnspection . . . . . . . . . . . . . . . . . page S-33 Removal 1 lnstallation . . . . . . . page S-34 8. Windshield wiper and washer Troubleshooting . . . . . . . . . . . . page $35 Inspection . . . . . . . . . . . . . . . . . page S-38 Removal / lnstallation . . . . . . . page S-39 Disassembly 1 Assembly . . . . page S-43 Adjustment . . . . . . . . . . . . . . . . page S-42 -- 9. Windshield Removal / lnstallation . . . . . . . page S-44 Gartner Banana

INDEX s 1. Trunk lid Removal 1 Installation ....... page S-16 Adjustment ................ page S-17 2. Trunk lid lock and opener Removal / Installation ....... page S-18 Adjustment ................ page S-18 3. Fuel-filler lid opener ....... Removal 1 Installation page S-23 .. 4. Rear bumper w Removal 1 Installation ....... page S-25 Disassembly 1 Assembly .... page S-26 5. Molding and garnish Removal / Installation ....... page S-27 6. Rear window glass (Detachable hardtop) Removal / Installation ....... page S-48 7. Rear window (Convertible top) Removal / Installation ....... page S-52 8. Convertible top Removal / Installation ....... page S-67 Disassembly 1 Assembly .... page S-69 Repair .................... page S-79 Adjustment ................ page S-82 9. Detachable hardtop .... Disassembly 1 Assembly page S-81 Adjustment ................ page S-82 Gartner Banana

s INDEX 1. Power window system ............. Structural view page S-19 ............ Troubleshooting page S-20 ................. Inspection page S-22 2. Fuel-filler lid opener ....... Removal / Installation page $23 3. Dashboard and console ....... Removal / Installation page S-56 ................. Adjustment page S-58 4. Trim ....... Removal / Installation page S-59 5. Floor covering ....... Removal / Installation page S-62 6. Seat belt ....... Removal / Installation page $63 ................. Inspection page S-64 7. Seat ....... Removal 1 Installation page S-65 Disassembly / Assembly .... page S-66 'd' ................. Inspection page S-65 8. Brace bar Removal / Installation ....... page S-84 Gartner Banana

WINDOW REGULATOR, GLASS, AND GUIDE S WINDOW REGULATOR, GLASS, AND GUIDE COMPONENTS Removal / Installation 1. Raise the door glass about 190 mm (7.5 in) from the fully open position. 2. Disconnect the negative battery cable. Note Remove the door screen carefully so that it may be reused. 3. Remove in the order shown in the figure, referring to Removal Note. 4. Install in the reverse order of removal, referring to lnstallation Note. 1. Regulator handle Removal Note . . Installation Note 2. lnner handle cover 3. Pull handle 4. Door trim Removal Note . . 5. lnner handle 6. Sealing pad 7. Door screen 8. Upper glass stopper 9. page S-10 ........... page S-10 ........... 10. 12. page S-61 ........... 13. Front beltline molding Removal Note ............. page S-28 Door glass Adjustment ................ page S-10 Window regulator Glass guide Door weatherstrip Division channel Quarter glass weatherstrip Quarter glass Speaker (if necessary) Dovetail (if necessary) Gartner Banana

s WINDOW REGULATOR, GLASS, AND GUIDE FRONT 45UOSX-00 Adjustment Door glass Adjust the door glass as follows: Removal Note Regulator handle Remove the regulator handle clip with a rag, as shown. ./ Installation Note Regulator handle Install the regulator handle as shown with the door glass fully closed. Adjust door (Refer to page S-8) Adjust convertible top or detachable hardtop (Refer to page S-78,82) 1 Remove the door weatherstrip (Refer to page S-9) Adjust door glass forwardlbackward (Refer to page S-13) Verify adjustment (Refer to page S-14) Adjustment completed Gartner Banana

WINDOW REGULATOR, GLASS, AND GUIDE s Vertical adjustment of door glass 1. Loosen the upper glass stopper installation bolts. 2. Lower the door glass slightly. 3. Move the upper glass stoppers up or down so that the upper edge of the door glass is in the correct posi- tion. 4. Tighten the installation bolts. Tightening torque: 7.9-10.7 N-m (80-110 kgf-cm, 70-95 imlbf} CORRECT TOO HIGH POSITION TOO LOW GLASS RETAINER SEC. A-A CONVERTIBLE TOP DETACHABLE HARDTOP RETAINER MOUNTING HOLE No.5 RETAINER MOUNTING HOLE No.1 / RETAINER MOUNTING HOLE No.1 /&INER MOUNTING HOLE N0.8 7 RETAINER GLASS % SEC. E-E RETAINER 9.1 2 2.0 I0.36 * 0.08) SEC. F-F mm (in} Gartner Banana