ZF Automatic Transmissions Service Manual
0
3il in bell housing
2.3.6 Fault Finding Chart (continued)
Oil pump seal leaking.
Oil pump 0
-ring leaking.
Pump housing leaking.
Converter seam leaking.
Problem Possible Cause Action
:onverter clutch
-eakage between gearbox and
sump
Leakage between intermediate
date and gearbox
Leakage at harness plug
:onnector
Leakage at drive flange
:Iutch engagement speed
ncorrect
Loose fastening screws.
Sump gasket faulty.
Bell housing to gearbox screws loose
Connector 'O'ring faulty
Rear oil seal faulty
ingagement
too hard
Jo clutch engagement
Ionverter clutch engaging at
dle (engine will not idle in
'D')
Control circuit fault.
Speed sensor faulty.
Valve body problem.
Converter unit faulty
Control circuit fault
MV3 faulty.
Converter clutch valve seized.
Converter faulty. Pressure reducing valve
1 seized.
Incorrect oil level.
Oil filter not sealing.
Control circuit fault.
MV3 faulty.
MV3 wire earthed.
Converter clutch valve
sticking.
Check TCM Diagnostics / rectify
fault.
Check TCM Diagnostics
1 renew
speed sensor.
Renew valve body
Renew converter unit
Check TCM Diagnostics
1 rectify
fault.
Renew valve block.
Renew valve block.
Renew converter.
Renew valve block.
Check oil level.
Check 0
-ring etc.
Check TCM Diagnostics
/ rectify
fault.
Renew valve block.
Renew harness.
Renew valve block.
Renew oil pump seal.
Renew 0
-ring.
Renew oil pump.
Renew converter.
Torque tighten.
Renew gasket.
Torque tighten
Renew
'0' ring
Renew oil seal
Issue 1 August 1994 66
. _.~ -
