1994 CHEVROLET SUBURBAN tow

Seats and Seat Controls
This section tells you about the seats - how to adjust them, and fold them up
and down, It also tells you about reclining front seatbacks and head
restraints.
Front Seats
Manual Front Seat
If your vehicle has a
manual bucket, split
bench, or full bench
seat, you can adjust
it
with this lever at the
front of the seat.
Slide the lever at the front
of the seat toward the outer seat support to unlock
it. Using your body,
slide the seat to where you want it. Then, release the
lever and try to move the seat with your body, to make sure the seat is
locked into place.
ProCarManuals.com

Power Seat
If your vehicle has a
power seat
on the
driver’s side,
you can
adjust
it with this
switch at
the front of
the seat.
You can use the center switch knob to move the seat where
you want it. To
raise the seat, move the center switch knob up. To lower the seat, move the
center switch knob down.
To move the seat forward, move the center switch
knob toward the inside
of the vehicle. To move the seat rearward, move the
center knob toward the outside of the vehicle.
You can also raise and lower
the front and rear of the seat. To raise the front
of the seat, move
the inner switch lever up. To lower the front of the seat
move the inner switch lever down.
To raise the rear of the seat, move the
outer switch lever up. To lower the rear of the seat, move the outer switch
lever down.
Reclining Front Seatback (Bucket or Split Bench Seat)
To adjust the seatback,
lift the front of this
lever.
Release
the lever to lock the seatback where you want it. Pull up on the
front
of the lever and the seatback will go to an upright position.
Don’t have
a seatback reclined if your vehicle is moving.
1-3 ProCarManuals.com

Easy htry Seat (Utility Model Front Seats)
The driver and passenger front bucket seat and the 40/60 split bench seat of
your vehicle has
an easy entry feature. This makes it easy to get in and out of
the rear seat.
To operate the seat,
pull forward on the
top
of the lever,
located at the side
of
the seatback, and tilt
the back forward
toward the front of the
vehicle.
When you do, the seat
bottom will release.
Just pull or push the
seat forward until it
stops.
To return the seat to
its regular position,
return the seatback to
its upright position,
then push the whole
seat rearward until it
latches.
After returning the seat to its regular position, try to move \
the seat with your
body, to make sure the seat
is locked into place.
1-6
ProCarManuals.com

Rear Seats
Easy Entry Seat (Wagon Model Second Seat)
The right side of the rear 60/40 split folding bench seat, available in the
wagon model, has
an easy entry feature. That makes it easy to get in and out
of the third seat, if you have one.
the seatback toward
the front
of the
vehicle.
When you do,
the seat bottom will release. Just pull or push the seat forward
until it stops.
To return the seat to its regular position, return the seatback to its upright
position, then push the whole seat rearward
until it latches.
After returning the seat to its regular position, try to move
the seat with your
body, to make sure the seat is locked
into place.
ProCarManuals.com

To unlatch the safety
belt, press
in on the
inside of the buckle
cover
sleeve and pull
the latch plate out of
Then, hang the latch
plate end
of the belt
on the hook at the top
of the retractor cover,
out of the way.
To remove the seat, fully open the rear load doors and enter the back of the
vehicle.
Move
the seatback
release lever, at
the
right rear of the seat,
toward the center
of
the vehicle.
1-11
ProCarManuals.com

Then, fold the
seatback forward into
the seat cushion.
To unlatch the seat
from
the floor, pull up
on the center release
handle
at the rear of
the seat and lift the
rear of the seat up, out
of the floor.
Turn the seat sideways and take
it out of the vehicle.
To put the seat back in, hold the seat sideways and put it into the vehicle.
Turn
the seat to the forward position and set it down, with the latches at the
bottom
of the seat over the hooks in the floor. Pull up on the center release
handle and let the seat drop into place. Release the handle
to let the seat
latch close and make sure it locks
into place. Then, move the seatback
release lever at the right rear
of the seat toward the center of the vehicle and
raise
the seatback.
After returning the seatback
to the upright position, push the seatback
forward
to make sure it is locked in place.
Then, return the outside passenger position safety belts to the seat frame
buckles,
so they will be available for rear seat passengers to use.
1-12
ProCarManuals.com

A
2: What if a child is wearing a lap-shoulder belt, but the child is so
small that the shoulder belt is very close to the child’s face or neck?
A: Move the child toward the center of the vehicle, but be sure that the
shoulder belt still
is on the child’s shoulder, so that in a crash the
child’s upper body would have the restraint that belts provide.
If the
child
is so small that the shoulder belt is still very close to the child’s
face or neck,
you might want to place the child in a seat that has a lap
belt,
if your vehicle has one.
1-41
ProCarManuals.com

Your Doors and How They Work
Side Doors
To open the door from
the outside, pull the
handle
up and pull the
door open.
To open the door from
the inside, pull the
lever toward
you and
push the door open.
2-7
ProCarManuals.com