Downloaded from www.Manualslib.com manuals search engine How to Use this Manual
In the gray caution area, we tell
you what the hazard is. Then we tell
you what to do
to help avoid or reduce
the hazard. Please read these cautions.
If you don’t,
you or others could be
hurt.
You will also find a circle with a slash
through it in this book. This safety
symbol means:
Don’t
Don’t
do this
Don’t let this
happen
Vehicle Damage Warnings
Also, in this book you will find
these notices:
NOTICE:
These mean there is something
that could damage your vehicle.
In the notice area, we tell you about
something that can damage your
vehicle. Many times, this damage would
not be covered by your warranty, and it
could be costly. But the notice will tell
you what to do
to help avoid the
damage.
When you read other manuals, you
might see CAUTION and NOTICE
warnings in different colors or in
different words.
You’ll also see warning labels on your
vehicle. They use yellow for cautions,
blue for notices and the words
CAUTION or NOTICE.
Downloaded from www.Manualslib.com manuals search engine Features & Controls
The high beam headlights will come on
at reduced brightness in daylight when:
The ignition is on
The headlight switch is off, and
The parking brake is released.
When you turn on your headlights, the
DRL will switch off and the exterior
lights will come on. When you turn off
the headlights, the exterior lights will go
out and the high beams will change to
the reduced brightness
of DRL again.
The DRL indicator light on the
instrument panel will go on whenever
the DRL are on. This light means that
only the DRL are on. When you turn on
your exterior lights, this light will go
out. Of course, you may still turn on the
headlights any time
you need to.
To idle your vehicle with the DRL off,
set the parking brake. The
DRL will
stay
off until you release the parking
brake.
J
Headlight High-Low Beam
Changer
To change the headlights from low
beam
to high or high to low, pull the
turn signal lever all the way toward you.
Then release it. When the high beams
are on, a blue light on the instrument
panel also will be on.
Flash-to-Pass (EXCEPT CANADA)
Flash-to-Pass lets you use your high
beam headlights to signal a driver in
front
of you that you want to pass.
To use it, pull the turn signal lever
toward you, then release.
If Your Headlights Are Off
Your high beam headlights will turn on.
They’ll stay on
as long as you hold the
lever there. Release the lever to turn
them off.
If Your Headlights Are On:
Flash-to-Pass does not operate when
your headlights are on. Use the lever to
change between high and low beams.
