Downloaded from www.Manualslib.com manuals search engine Safefy Warnings and Symbols
You will find a number of safety cautions
in this book. We use a box with a gray
background and the word CAUTION to
tell you about things that could hurt you if
you were to ignore the warning.
In the gray caution area, we tell you what
the hazard is. Then we tell you what to do
to help avoid or reduce the hazard. Please
read these cautions. If you don’t, you or
others could be hurt.
‘I
You will also find a circle with a slash
through it in this book. This safety symbc
means “Don’t,’’ “Don’t do this,” or “Don!
let this happen.”
NOTICE:
These mean there is something that
could damage your vehicle.
,1
’t
M
AI
nc
In
M
so
co
co
do
W
set
di~
YC
ve
fo:
Nc
ehicle Damage Warnings
[so, in this book you will find these
ktices.
the notice area, we tell you about
mething that can damage your vehicle.
any times, this damage would not be
lvered by your warranty, and it could be
Istly.
But the notice will tell you what to
1 to help avoid the damage.
‘hen
you read other manuals, you might
e CAUTION and NOTICE warnings in
fferent colors or in different words.
m’ll also see warning labels
on your
hicle. They use yellow for cautions, blue
c notices and the words CAUTION or
3TICE.
7..
Downloaded from www.Manualslib.com manuals search engine Features and Controls
-- a
feadlight HighLow Beam
’0 change the headlights from low beam
3 high or high to low, pull the turn signal
:ver all the way toward you.
Then
:lease it. When the high beams are on,
lis blue light on the instrument panel
Is0 will be on.
. .74
Windshield Wipers
You control the windshield wipers by
turning the band with the wiper symbol
on it.
For a single wiping cycle,
turn the band tc
“MIST.” Hold it there until the wipers
start, then let go. The wipers will stop
after one cycle. If you want more cycles,
hold the band on “MIST” longer.
You can set the wiper speed for a long or
short delay between wipes. This can be
very useful
in light rain or snow. Turn the
band to choose the delay time. The closer
to
“LO,” the shorter the delay. For
steady wiping at low speed, turn the
band away from you
to the “LO’ position.
For high speed wiping, turn the band
further, to
“HI.” To stop the wipers, move
the band to “OFF.”
Heavy snow or ice can overload your
wipers.
A circuit breaker will stop them
until the motor cools. Clear away snow
or
ice to prevent an overload.
