1994 CHEVROLET ASTRO PASSENGER lights

Downloaded from www.Manualslib.com manuals search engine These symbols are important for you and your passengers whenever your
vehicle
is driven:
I Fasten Safety Door LocWUnlock
Belts
These symbols have to do with your lights:
I Master Lighting
S wifc h
Parking Lights
I Turn Signal
Direction
Daytime
Running Lights
A
Hazard Warning
Flasher
1 Fog Lights Headlight
High Beam
viii

Downloaded from www.Manualslib.com manuals search engine These symbols are on some of your controls:
Hood Release
Ventilating
Fan
Windshield Wiper
Q
Rear Window
Wiper
& Washer
w
Windshield
Washer
I I
Rear Window Defogger
w
These symbols are used on warning and indicator lights:
Engine Coolant
Temperature Battery Charging
System
Brake
(Standard Cluster
ANTI-
LOCK
4- Wheel
Anti-Lock
Windshield Defroster
Hatch
Release
II
Fuel Engine Oil
Pressure
ix

Downloaded from www.Manualslib.com manuals search engine Safety Belts: They’re For Everyone
This part of the manual tells you how to use safety belts properly. It also
tells you some things you should not do with safety belts.
And it explains the Supplemental Inflatable Restraint,
or “air bag” system.
This figure lights up as a reminder to buckle up. (See “Safety Belt Reminder
Light” in the Index.)
In many states and Canadian provinces, the law says to wear safety belts.
Here’s why:
They work.
You never know if you’ll be in a crash. If you do have a crash, you don’t
know
if it will be a bad one.
A few crashes are mild, and some crashes can be
so serious that even
buckled up a person wouldn’t survive. But most crashes are in between.
In
many of them, people who buckle up can survive and sometimes walk away.
Without belts they could have been badly hurt or killed.
1-11

Downloaded from www.Manualslib.com manuals search engine All-Wheel Drive (Option) .................. ............... 2-26
Windows
................................................ 2-26
Horn
.................................................... 2-29
Tilt Wheel (Option)
........................................ 2-29
Turn SignaVMultifunction Lever
.............................. 2-30
Turn Signal and Lane Change Indicator
...................... 2-30
Headlight High-Low Beam
............................... 2-32
Windshield Wipers
.................................... 2-32
Windshield Washer
...................................... 2-33
Rear Window WiperNasher
.............................. 2-34
Cruise Control
........................................ 2-35
Lights
................................................. 241
Mirrors
.................................................. 245
SunVisors
............................................. 247
Cigarette LighterlAshtrays
................................... 248
Assist Handles
............................................ 249
Storage Compartments
...................................... 2-50
Instrument Cluster
......................................... 2-51
Warning Lights, Gages and Indicators
....................... 2-55
Indicator Lights
....................................... 2-57
Gages
................................................ 2-61
Luggagecarrier
........................................... 2-65
Trailer Wiring Harness
... ......... ~~ . . 2-66
2-2

Downloaded from www.Manualslib.com manuals search engine ‘I
I
A green arrow on the
instrument panel will
flash in the direction
of the turn or lane
change.
To signal a lane change, just raise or lower the lever until the green arrow
starts to flash. Hold it there until
you complete your lane change. The lever
will return by itself when
you release it.
As you signal a turn or a lane change, if the arrows don’t flash but just stay
on, a signal bulb may be burned out and other drivers won’t
see your turn
signal.
If a bulb is burned out, replace it to help avoid an accident. If the green
arrows don’t go
on at all when you signal a turn, check the fuse (see “Fuses”
in the Index) and for burned-out bulbs.
If you have a trailer towing option with added wiring for the trailer lights, a
different turn signal flasher is used. With this flasher installed, the signal
indicator will flash even if a turn signal bulb is burned out. Check the front
and rear turn signal lights regularly to make sure they are working.
Operation of Lights
Although your vehicle’s lighting system (headlights, parking lights, fog
lamps, side marker lights and taillights) meets all applicable federal lighting
requirements, certain states and provinces may apply their own lighting
regulations that may require special attention before you operate these
lights.
For example, some jurisdictions may require that you operate your fog
lamps only when your lower beam headlights are also
on, or that headlights
be turned
on whenever you must use your windshield wipers. In addition,
most jurisdictions prohibit driving solely with parking lights, especially at
dawn or dusk. It is recommended that you check with your own state or
provincial highway authority for applicable lighting regulations.
2-31

Downloaded from www.Manualslib.com manuals search engine Headlight High-Low Beam
To change the
headlights from low
beam to high
or high
to low, pull the turn
signal lever all the
way toward
you. Then
release it.
Windshield Wipers
When the high beams
are
on, this blue
indicator light
on the
instrument panel also
will be on.
You control the
windshield wipers by
turning the band with
the wiper symbol on
it.
1 LQ -
2-32

Downloaded from www.Manualslib.com manuals search engine Lights
Your light switches
are
on the left side of
the instrument panel
above the vent.
Press the top light switch to the left
to turn on:
Parking Lights
Taillights
0 License Plate Lights
0 Instrument Panel Lights
Press the bottom light switch to the left to turn on the headlights, together
with:
Parking Lights
0 Taillights
License Plate Lights
Instrument Panel Lights
Press
OFF to turn off all your lights.
Turn the dial above the light switches to the left to dim your instrument
panel lights.
Turn the dial to the right to brighten your instrument panel lights. If you
turn the dial all the way to the right until it clicks, your interior lights will
come on.
You can switch your headlights from high to low beam by pulling on the
multifunction lever on the left
of the steering column.
A circuit breaker protects your headlights. If you have an electrical
overload, your headlights will flicker on and off. Have your headlight
wiring checked right away if this happens.
2-41

Downloaded from www.Manualslib.com manuals search engine Fog Lamps
I Use your optional fog
lamps for better vision
in foggy or misty
conditions. Your
parking lights or headlights
on low
I
beam must be on or
your fog lamps won’t
work.
I is in the cent& of the
instrument panel
dl;.l*. By..: above the radio.
Slide the right side of the switch to turn the fog lamps on, and the left side
of the switch to turn them off.
A warning light in the switch will remind you
that your fog lights are
on.
Remember, fog lamps alone will not give off as much light as your
headlights.
Never use your fog lamps in the dark without turning
on your headlights.
Fog lamps will
go off whenever your high beam lights come on. When the
high beams go off, the fog lamps will come
on again.
2-42