Downloaded from www.Manualslib.com manuals search engine Rear Seats
Bucket Seats
If you have rear bucket seats in your vehicle, they will recline and adjust the
same way as the front manual bucket seats. See “Front Seats” earlier
in this
section or in the Index.
Bench Seats
If you have bench seats in your vehicle, each seat can carry up to three
passengers. They can also be removed to increase storage space.
The center and rear bench seats can be adjusted forward or rearward by the
lever at the front
of the seat.
Slide the lever at the
front of the seat to the
right to unlock
it.
Slide the seat to where
you want it. Then
release the lever and
try to move the seat
with your body, to
make sure
the seat is
locked into place.
The non-touring center bench seat has a pivoting right armrest. The left
armrest can also be used as a storage compartment,
The storage compartment and beverage cooler can also
be used as rear seat
armrests. See “Storage CompartmentBeverage Cooler” in the Index.
The optional touring bench seats come
with moveable armrests, individual
reclining seatbacks, adjustable headrests
and a fold down center console.
1-5
Downloaded from www.Manualslib.com manuals search engine Seatback Latches (Non-Touring Bench Seats)
To fold your
non-touring seatback
forward, pull up on
the latch release lever
while pulling the
seatback toward you.
The lever is on the
right rear of your seat.
After the latch has been released, push the seatback down until it locks in
place. To raise the seatback, unlock the seat by pushing forward on the
lever. Make sure the seatback
is locked when it is put back in the upright
position.
Removable Seats (Touring and Non-Touring Bench Seats)
To Remove The Seat
1. Disconnect the quick release latch plates for the lapshoulder belt from
the buckles in the roof.
1-7
