Page 93 of 340

Downloaded from www.Manualslib.com manuals search engine For a single wiping cycle, turn the band to MIST. Hold it there until the
wipers start, then let go. The wipers will stop after one cycle. If
you want
more cycles, hold the band on
MIST longer.
You can
set the wiper speed for a long or short delay between wipes. This
can be very useful in light rain
or snow. Turn the band to choose the delay
time. The closer to
LO, the shorter the delay.
For steady wiping at low speed, turn the band away from you to the
LO
position. For high speed wiping, turn the band further, to HI. To stop the
wipers, move the band to the off symbol.
Remember that damaged wiper blades may prevent you from seeing well
enough to drive safely.
To avoid damage, be sure to clear ice and snow from
the wiper blades before using them. If they're frozen to the windshield,
carefully loosen or thaw them. If your blades do become damaged, get
new
blades or blade inserts.
Heavy snow or ice can overload your wipers.
A circuit breaker will stop
them until the motor cools. Clear away snow or ice to prevent an overload.
Windshield Washer
At the top of the multifunction lever there's a paddle marked with the
windshield washer symbol and
PUSH. To spray washer fluid on the
windshield, push the paddle.
The wipers will clear the window and then either stop or return to your
preset speed.
Driving without washer fluid can be dangerous.
A bad mud splash can block
your vision. You could hit another vehicle or go off the road. Check your
washer fluid level often.
2-33
Page 94 of 340
Downloaded from www.Manualslib.com manuals search engine NOTICE:
When using concentrated washer fluid, follow the
manufacturer’s instructions for adding water.
Don’t mix water with ready-to-use washer fluid. Water can
cause the solution to freeze and damage your washer fluid
tank and other parts of the washer system. Also, water
doesn’t clean
as well as washer fluid.
Fill your washer fluid tank only 3/4 full when it’s very cold.
This allows for expansion, which could damage the tank
if it is
completely full.
~ 0 Don’t use radiator antifreeze in your windshield washer. It
can damage your washer system and paint.
Rear Window WiperNVasher-Dutch Door
You control your rear
window wipedwasher
from a switch on your
instrument panel, just
left
of your steering
column.
2-34
Page 95 of 340
Downloaded from www.Manualslib.com manuals search engine 0 Press the top of the switch to the first position to turn on the wiper.
0 Press the top of the switch in all the way and hold to release the desired
amount of washer fluid. The wipers will continue to work after you
release the switch.
Press the bottom of the switch (OFF) to turn the wiper off.
The rear window washer system uses the same fluid tank as the windshield
washer system.
The rear window washer system will run out
of fluid before the windshield
washer system, indicating
you need to check your fluid level and fill the
fluid tank.
Cruise Control (Option)
With Cruise Control, you can maintain a speed of about 25 mph (40 kdh)
or more without keeping your foot on the accelerator. This can really help
on long trips. Cruise Control does not work at speeds below about 25 mph
(40 kmh).
When
you apply your brakes, the Cruise Control shuts off.
2-35
Page 112 of 340
Downloaded from www.Manualslib.com manuals search engine Instrument Panel
14 13
27
/
1. Light Switches
2. Dimmer Switch
3. Instrument Cluster
4. Gearshift Lever
5. Air ConditionedHeater
6. Fog Light Switch
7. Remote Outside Mirror Switch
8. Rear Heater Switch
9. Rear A/C Switch
10. Interior Light Override Switch
11. Audio System
12. Convenience Tray
13. Glove
Box
14. Ashtray
15. Cigarette Lighter
16.
Hood Release Handle
17. Hazard Warning Flasher
18. Ignition Switch
19. Horn
20. Brake Release Handle
2
1. Multifunction Lever
22. Cruise Control
23. Tilt Wheel Lever
24. Rear Wipermasher Switch
25. Hatch Release Switch
26. Rear Window Defogger Switch
27. Vent
Page 129 of 340

Downloaded from www.Manualslib.com manuals search engine Comfort Controls & Audio Systems
Section
In this section you’ll find out how to operate the comfort control and audio
systems offered with your vehicle
. Be sure to read about the particular
system supplied with your vehicle
.
For explanation of vehicle symbols in this section. refer to “Vehicle
Symbols” in the Introduction
.
Comfort Control
Flow-Through Ventilation System
......................... 3-2
Heating System
........................................ 3-4
Heating/Air Conditioning System
........................... 3-5
RearHeater
............................................. 3-6
Rear Air Conditioning
......................... ..... 3-6
Rear Window Defogger
. . .......... ... 3-7
Engine Coolant Heater
.............................. ..... 3-8
Audiosystems
............................................. 3-8
....... ....... ........... FM Stereo . . ..... 3-8
AMStereo
.............................................. 3-8
How to Operate Your ETR@ AM Radio
....................... 3-9
How to Operate Your ETR@ AM-FM Stereo Audio System
... 3-11
How to Operate Your ETR@ AM-FM Stereo Audio
Cassette System
...................................... 3-13
How to Operate Your ETR@ AM-FM Stereo Audio Cassette System
With Equalizer
....................................... 3-16
Care of Your Cassette Tape Player
.......................... 3-19
How to Operate Your ETR@ AM-FM Stereo Audio 20
Compact Disc (CD) System
............................ 3-20
Care
of Your Compact Discs .............................. 3-25
Fixed Mast Antenna
..................................... 3-25
AM
............................................. 3-8
3-1
Page 130 of 340

Downloaded from www.Manualslib.com manuals search engine Comfort Controk
Flow-Through Ventilation System
W W
Your vehicle’s flow-through ventilation system supplies outside air to the
inside
of your vehicle when it is moving. With the side windows closed, air
will flow into the front air inlet grilles at the base of the windshield, through
the vehicle and out the rear air exhaust valves. Outside air will also enter the
vehicle when the heater or the air conditioning fan is running.
Ventilation Tips
Keep the hood and front air inlet free of ice, snow, or any other
obstruction (such as leaves). The heater and defroster will work far
better, reducing the chance
of fogging the inside of your windows.
When you enter a vehicle in cold weather, turn the blower fan\
to HIGH
for a few moments before driving off. This helps clear the intake ducts
of snow and moisture, and reduces the change
of fogging the inside of
your windows.
0 Keep the air path under the front seats clear of objects. This helps air to
circulate throughout your vehicle.
3-2
Page 132 of 340

Downloaded from www.Manualslib.com manuals search engine Heating System
If your vehicle does
conditioning, this is
what your heating system will look like.
I not have air
Fan Lever
The top lever has four positions. To increase the air flow, move the lever
toward
HIGH. To decrease the air flow, move it toward OFF.
Temperature Lever
The left lever lets you select the temperature of the air flowing into your
vehicle. Move the lever up for warmer air. Move the lever down for cooler
air.
Function Lever
The right lever can be moved to five different functions.
DEFROST The setting with the defrost symbol operates the defroster.
Most of the air comes out near
the windshield, with some going to the floor
vents and front side windows. Use this when you get fog or ice on the
windshield.
HTR (Heater): Most of the air comes out near the floor. The rest comes out
from the defroster vents under the windshield and at
the front side windows.
This is best for cold weather.
VENT The air comes out at the vents on your instrument panel.
BLEND (Position 1): With this setting, the heated outside air comes out
between the heater vents and defroster vents. The lever can be positioned
anywhere between to adjust proprotion of air coming through. Adjust the
temperature lever for warmer or cooler air.
BLEND (Position 2): With this setting, the heated outside air comes out
between the vents and heater vents. The lever can be positioned anywhere
between to adjust proprotion of air coming through. Adjust the temperature
lever for warmer
or cooler air.
3-4
Page 133 of 340

Downloaded from www.Manualslib.com manuals search engine Heating/Air Conditioning System
If your vehicle has air conditioning, your heating/air conditioning system
will look like this.
Before using your
vehicle's air conditioning, open the windows to clear the
vehicle of hot air. Close the windows when using the system.
Fan Lever
The top lever has five positions. To increase the air flow, move the lever
toward
HIGH. To decrease the air flow, move the lever toward OFF.
Temperature Lever
The left lever lets you select the temperature of the air flowing into your
vehicle. Move the lever up for warmer air. Move
the lever down for cooler
air.
Function Lever
The right lever can be moved to four different functions.
DEFROST The setting with the defrost symbol operates the defroster.
Most of the air comes out near the windshield, with some going to the floor
vents and side window defrost vents. Use this when you get fog or ice on
the windshield.
BLEND: With this setting, the heated outside air comes out between the
heater vents and defroster vents, with some air coming through the side
vents. Adjust the temperature lever for warmer or cooler air.
HTR (Heater): Most of the air comes out near the floor. The rest comes out
from the defroster vents under the windshield and at the front side windows.
This
is best for cold weather.
VENT: The air comes out at the vents on your instrument panel, The air
conditioner will not run. Adjust the temperature lever for warmer or cooler
air.
3-5