Page 120 of 398
Downloaded from www.Manualslib.com manuals search engine NOTICE:
When using concentrated washer fluid, follow the
manufacturer's instructions for adding water.
Don't mix water with ready-to-use washer fluid. Water can
cause the solution to freeze and damage your washer fluid
tank and other parts of the washer system.
Also, water
doesn't clean as well
as washer fluid.
~ Fill your washer fluid tank only 3/4 full when it's very cold.
This allows for expansion, which could damage the tank
if it
is completely full.
Don't use radiator antifreeze in your windshield washer. It
can damage your washer system and paint.
Headlight Washer (Export Only)
If you have this feature, you will wash your headlights while washing your
windshield at the same time in bad weather. Just press the
PUSH paddle
on the multifunction lever.
7
L.
L
c
108
Page 122 of 398
Downloaded from www.Manualslib.com manuals search engine CAUTION
.. .. , ...
Hyeu lteave yuur Cruise Control switch on,when you’re not
using Cruise, you might hit a button and go into Cruise when
you don’t
want to. You could be startled and even lose control.
Keep the Cruise Control switch tCOFI?n until you want to use it.
2. Get up to the speed you want.
4. The digital
instrument panel
cluster has a
“CRUISE
ENGAGED” light
CRUISE ENGAGED that will come on.
On the analog cluster the “CRUISE ENGAGED” message will
display
for a few seconds.
Page 125 of 398
Downloaded from www.Manualslib.com manuals search engine r
To Get Out of Cruise Control
There are two ways to turn off the Cruise Control:
r
7 I I
Step lightly on the
brake pedal
; OR
0
r
P
r
Move the CRUISE switch to
“OFF.”
r
To Erase Speed Memory
1 When you turn off the Cruise Control or the ignition, your Cruise
Control set speed memory is erased.
113
I
Page 126 of 398
Downloaded from www.Manualslib.com manuals search engine LIGHTS
You’ll find the control on the left side of the instrument panel.
It controls these light systems:
0
0
0
0
0
0
0
a
0
Headlights
Taillights
Parking Lights
Underhood Light
Instrument Panel Lights
License Plate Lights
Interior Courtesy Lights
Fog Lights (ETC Only)
Rear Fog Lights (Export Only)
Here’s how to
manually work your
light system.
0 Pull the switch out to the first stop to turn on your parking and
taillights, side marker lights and instrument panel lights.
0 Pull the switch out all the way to turn on the headlights.
0 YOU can brighten or dim your instrument cluster by rotating the
Push the switch all the way in to turn them off.
headlight switch.
114
c1
Page 127 of 398
Downloaded from www.Manualslib.com manuals search engine r
r
I-
!-
I
r
f- I
Lights On Reminder
If you open the door while leaving the lights on, you will hear a warning
tone.
Interior Lights
Turn the headlight switch passed HI to turn on the interior lights.
llkilight Sentinel
The control is next to the headlight switch. It switches your lights on and
off by sensing how dark it is outside. To operate it, leave the light switch
off and move the control to.a&position:bui off,
If
you move the control all the way to MAX, your lights will remain on for
90 seconds after you turn your -engine -off. If you move the control almost
all the
way in the other direction, so it is just on, the lights will go off
quickly when you turn off your engine. You can change this delay time ’
from only a few seconds to 90 seconds.
r
115
Page 128 of 398
Downloaded from www.Manualslib.com manuals search engine Light Sensor
Fog Lights (ETC)
Use your fog lights for better vision in foggy or misty conditions. When
you press the upper fog light switch, a small indicator light will glow
to
tell you the fog lights are on. To turn them off, press the switch again.
When the twilight sentinel is on, the headlights will turn
off
automatically. Your fog and parking lights will remain on.
116
-_
Page 129 of 398
Downloaded from www.Manualslib.com manuals search engine 1
r
i' I
r
They,u If you switch turn back on your on ag~in~~~~~~n~~~'u~~w~~~~'~o.~ow hi@,he-am .bea$&hp, your.fogllights beam headlights will-turn off.
Rear Fog Lights (Eqort -Only)
Cornering Lights
To turn them on, push
the lower switch. A
small indicator .light
will glow to tell
you
they are on. To turn
them
off, press the
switch again.
.The cornering 1.ights;Come on when you signal a..tum when
the headiights
or parking 'lights are on. Thiswill provide. more light for cornerin&
TO operate, turn on your parking '1ights;then the underhood light will
7 illuminate when ,the hood is. open.
!
F L*
Page 130 of 398

Downloaded from www.Manualslib.com manuals search engine Daytime Running Lights (Canada Only)
The Canadian Federal Government has decided that “Daytime Running
Lights” (DRL) are a useful feature, in that DRL can make your vehicle
more visible
to pedestrians and other drivers during daylight hours. DRL
are required on new vehicles sold
in Canada.
your DRL work with a light sensor on top
of the instrument panel. Don’t
cover it up.
The low beam headlights will come on at reduced brightness in daylight
when:
0 The ignition is on
0 The headlight switch is off, and
0 The transaxle is not in “P” (Park).
At dusk, if the Twilight Sentinel feature is turned on, the exterior lights
will come on automatically and the low beams will change to full
brightness. At dawn, the exterior lights will go out and the low beams will
change to the reduced brightness
of DRL (if the headlight switch is off).
Of course, you may still turn on the headlights any time you need to.
To idle your vehicle with the DRL
off, snift the transaxle into “P” (Park).
The DRL will stay
off until you shift out of “P” (Park).
118
-
c -*