1993 Oldsmobile Cutlass Supreme height

2. Adjust the seat, if necessary, before
setting the height control.
Rotate the HUD image height control
all the way up, raising the image as
far as possible. Then rotate the HUD
image height control downward
so
the image is as low as possible but in
full view.
3. Slide the dimmer control toward
OFF until the HUD image is no
brighter than necessary.
To turn the
HUD off, slide the HUD dimmer
control to
OFF.
If the sun comes out, or it becomes
cloudy, or
if you turn on your
headlights, you may need
to adjust the
HUD's brightness using the HUD
dimmer control. Polarizing sunglasses
could make the HUD image harder
to see.
I I
CAUTION I
A
If the HUD image is too
bright, or too high
in your
field of view, it may take you more
time to see things you need to see
when it's dark outside. Be sure to
I
keep the HUD image dim and
I placed low in your field of view.
203

Features & Controls
I
104
Head-Up Display (CONT.)
Pushing the ENG/MET rocker switch
on the center console
will switch the
HUD speedometer from English
(conventional) to metric units, or back
again.
Some vehicles may not be
equipped
with the ENG/MET switch.
Care of the Head-Up Display
Clean the inside of the windshield as
needed to remove any dirt or
film that
reduces the sharpness
or clarity of the
HUD image.
To Clean the HUD:
Spray household glass cleaner on a soft,
clean cloth. Wipe the HUD lens gently,
then
dry it. Do not spray cleaner
directly on the lens, because the cleaner
fluid could leak inside the unit
if you do.
If You Can’t See the HUD Image
When the Ignition
is On:
Is anything cbvering the HUD unit?
Is the HUD dimmer control close
enough
to MAX?
Is the HUD image-adjusted to the
proper height?
Still no HUD image? Check the fuse
in the
CLUST position in the glove
box fuse panel. See the Index under
Fuses G Circuit Breakers.
..

Your Driving and the Road
Disc Brake Wear Indicators
(CONT.)
zontinuing to drive with worn-01
)rake pads could rest :ostlv
Some driving conditions or climates
may cause a brake squeal when the
brakes are first applied or lightly
applied. This does not mean something
is wrong with your brakes.
Brake linings should always be replaced
as complete axle sets.
Brake Pedal Travel
See your dealer if the brake pedal does
not return to normal height, or
if there
is a rapid increase in pedal travel. This
could be
a sign of brake trouble.
Brake Adjustment
Every time you make a moderate brake
stop, your disc brakes adjust for wear.
If
you rarely make a moderate or heavier
stop, then your brakes might not adjust
correctly.
If you drive in that way,
then-very carefully-make a few
moderate brake stops about every
1,000
miles (1 600 km), so your brakes will
adjust properly.