Heating and Venfilafion
When you don’t need to cool the outside
air, use these next settings.
You can
leave the air as it is or heat it.
The air conditioner compressor doesn’t
run in these settings. This reduces the
engine load, resulting in improved fuel
economy (gas mileage)
.
VENT: For mild outside temperatures,
when little heating or cooling is needed,
push
VENT. Air flow is through the
instrument panel outlets. Slide the
temperature control lever to a
comfortable level.
HEAT: When outside temperatures are
cold, push
HEAT. Slide the temper-
ature control lever to a comfortable
level. For maximum heating, slide it all
the way to the right.
This setting will send most of the heated
air through the ducts near the floor. The
rest will come out of the defroster vents
and side window defogger vents.
Defogging and Defrosting
There are two settings for clearing your
windows. For each setting, adjust the
temperature control
as desired. The air
conditioner compressor will run in
these settings to remove moisture from
the air when the temperature
is above
freezing.
tv th This setting allows half of
e air to flow to the floor
heater ducts, and half to
go to the windshield and
side window vents located
in the windshield pillars.
Use this setting to warm
passengers while keeping
the windshield clear. The
DEF setting directs 90% of
the air
through the defroster vents and the side
window vents, and
10% to the floor.
111
