1993 Oldsmobile Cutlass Supreme fuse

1
How to Use this Manual
I
Wehicle Symbols (CONTJ
These symbols are on some of your
controls: These symbols are used on warning
and indicator lights:
Windshield Wipers
Engine Coolant
Temperature
Windshield Washer
Windshield Defroster
Rear Window Defogger Ventilating Fan
Power Window
Here are some other symbols you
may see:
Fuse
Battery Charging
System Trunk Release
Lighter
Fuel
Engine
Oil Pressure
Brake
Anti-Lock Brakes Horn
Speaker
Hood Release
b

~ Seats & Sajety Belts
12
Seats and Seat Controls
This section
tells you about the seats-
how to adjust them-and also about
reclining seatbacks and head restraints.
Manual Front Seat
CAUTION
1 A You can lose control of the
.- vehicle if you try to adjust a
manual driver’s seat while the
vehicle is moving. The sudden
movement could startle and
confuse
you, or malte you push a
pedal when
you don’t want to.
Adjust the driver’s seat
o r when
the vehicle
is not moving.
To adjust the seat forward or back, lift
the handle. After it’s adjusted, release
the handle and try to move the seat to
be certain it has locked into place.

70
Features & Controls
Turn Signal and Lane Change
Indicator
(CONT.)
A green arrow on the instrument panel
will flash in the direction of the turn or
lane change.
To signal a lane change, just raise or
lower the lever until the green arrow
starts to flash. Hold it there until you
complete your lane change. The lever
will return by itself when you release it.
As you signal a turn or a lane change, if
the arrows don’t flash but just stay on,
a
signal bulb may be burned out and
other drivers won’t see your turn signal.
If a bulb is burned out, replace it to help
avoid an accident.
If the green arrows
don’t go on at all when
you signal a
turn, check the fuse (see the
Index
under Fuses G Circuit Breakers) and
for burned-out bulbs.
A warning chime will remind you if you
have left your turn signal on for more
than
‘/2 mile (-8 km) of driving.
. Cruise Control (OPTION)
With cruise control, you can maintain a
speed of about
25 mph (40 lun/h) or
more without keeping your foot on the
accelerator. This can really help on long
trips.
Cruise control does not work at speeds
below about
25 mph (40 lun/h).
When you apply your brakes, the cruise
control shuts off.

The Instrument Panel-
Your Information System
Your instrument panel is designed to let
you know
at a glance how your vehicle
is running. You’ll know how fast you’re
going, how much fuel you’re using, and
many other things you’ll need to drive
safely and economically.
The main components of your
instrument panel are:
1. Turn Signal/Headlight Beam Lever
2. Tilt Steering Wheel Lever
3. Indicator Lights
4. Instrument Cluster
5. Warning Lights
6. Gearshift Lever
7. Audio System
8. Glove Box/Fuse Panel
9. Vents
IO. Vents
11. Climate ControVRear Window
Defogger
12. Ashtray and Lighter
13. Vents
14. Ignition Switch
15. Hazard Warning Flashers Switch
16. Horn
17. Remote Trunk Release (Option)
18. Brake Release
19. Hood Release (on floor by driver’s
20. Light Controls
door)
89

i-
Features & Controls
96
Low Coolant Warning Light
If this light comes on, your system is
low on coolant and the engine may
overheat.
See the
Index under Engine Coolant
and have your vehicle serviced as soon
as you can.
Oil Warning Light
(E LE CTRONlC CLUSTER)
If you have a problem with your oil, this
light may stay on after you start your
engine,
or come on when you are
driving. This indicates that oil is not
going through your engine quickly
enough to keep it lubricated. The engine
could be low
on oil, or could have some
other oil problem. Have it fixed right
away. The
oil light could also come
on in three
other situations:
When the ignition is on but the engine
is not running, the light will come on
as a test to show you it is working, but
the light will go out when you turn the
ignition to
Start. If it doesn’t come on
with the ignition on, you may have a
problem with the fuse or bulb. Have it
fixed right away.
Sometimes when the engine is idling
at a stop, the light may blink on and
off. This is normal.
If you make a hard stop, the light may
come on for a moment. This is
normal.

Features & Controls
I
104
Head-Up Display (CONT.)
Pushing the ENG/MET rocker switch
on the center console
will switch the
HUD speedometer from English
(conventional) to metric units, or back
again.
Some vehicles may not be
equipped
with the ENG/MET switch.
Care of the Head-Up Display
Clean the inside of the windshield as
needed to remove any dirt or
film that
reduces the sharpness
or clarity of the
HUD image.
To Clean the HUD:
Spray household glass cleaner on a soft,
clean cloth. Wipe the HUD lens gently,
then
dry it. Do not spray cleaner
directly on the lens, because the cleaner
fluid could leak inside the unit
if you do.
If You Can’t See the HUD Image
When the Ignition
is On:
Is anything cbvering the HUD unit?
Is the HUD dimmer control close
enough
to MAX?
Is the HUD image-adjusted to the
proper height?
Still no HUD image? Check the fuse
in the
CLUST position in the glove
box fuse panel. See the Index under
Fuses G Circuit Breakers.
..

Service & Appearance Care
270
Fuses & Circuit Breakers
The wiring circuits in your vehicle are
protected from short circuits by
a
combination of fuses, circuit breakers,
and fusible thermal links in the wiring
itself. This greatly reduces the chance of
fires caused by electrical problems.
Some fuses are located in a fuse block
in the glove box as shown above.
To
locate the fuse block, lift out the storage
bin inside the glove box. See the
diagram later in this section.
Another set of fuses is located in the
component center, under the
instrument panel.
Additional fuses are located in the
underhood electrical centers on the
right and left sides of the engine
compartment. Spare fuses
and a fuse puller are located
in the glove box lid. To remove the
cover, press in on both ends
of the
cover and pull it
off.
Place the wide end of the fuse puller
over the plastic end of the fuse. Squeeze
the ends over the fuse and pull it out.
To identify and check fuses, refer to the
charts on the following pages. Look
at the silver-colored band inside
the fuse. If the band is broken or
melted, replace the fuse. Be sure you
replace a bad fuse with a new one of the
identical size and rating.

Glove Box Fuse Block Fuse
1
2
3
4
5
6
7
8
9
10
Rating
(AMP.)
10
15
10
25
10
15
15
20
15
10
11 - 5
12 15
13 10
14
15
16
17
18
10
20
Circuitry
Radio & Clock
Radio
& Clock; Passive Restraint Lockout, Passive Restraint
Timer; DID, Cluster
Door Lock; Courtesy, Glove Box, Underhood, Trunk,
Header Lights; Lighted Inside Rearview Mirror, Outside
Power Mirrors
Windshield Wiper
& Washer
Temp Door Motor; DRL Module (Canada)
; Instrument
Cluster, HUD Dimmer, HUD Module
Brake Lights; ABS Control Module; Chime Module
ECM
Taillights; HVAC; Chime Module; DRL Module (Canada)
Hazard Warning Flasher
Rear Defogger Timer Relay; Instrument Cluster; Chime
Module; Cruise Control;
DRL Module (Canada); Lamp
Driver Module; ABS Lamp Driver
Instrument Panel, Console, Switch Lights
Cigarette Lighter
Turn Signals/Flasher; Computer Center
Not Used
ABS Control Module
Not Used
Not Used Blower Motor, SOL Box
2 71