IA
Using a match near a battery can cause battery gas to explode.
People have been hurt
doing this, and some have been blinded. Use
a flashiight if you need more light.
Be sure the batteries have enough water. You-don? need
to adb
water to the Delco Freedom* battery (or batteries) instailed in every
new
GM vehicle. But if a battery has filler caps, be sure the right
amount of fluid
is there. If it is low, add water to take care of that
first.
If you don’t, explosive gas could be present. .hr~ic;. -- ,
Battery fluid conbins acid that can burn you. Don’t. get it. on you.
. you accidentally get it in your eyes or on your skin, ftush the placl
~~~~-,~~~~.~-:~~.~.~. -2-
.with water and get medical help immediately.
5. Check that the jumper cables don’t have loose or missing insulation. If
they do, you could get a shock. The vehicles could be damaged, too.
Before you connect the cables, here are some things you should\
know.
Positive
(t) will go to positive (t) and negative (-) will go to negative
(-) or a metal engine part. Don’t connect (t) to (-) or you’ll get a
short that would damage the battery and maybe other parts, too\
.
I
Fans or other moving engine parts can injure you badly. Keep your
hands away from moving parts once the engines are running.
6. Connect the red positive (t) cable to the positive (t) terminal of the
vehicle with the dead battery. Use a remote positive
(t) terminal if the
vehicle has one.
5-5
ProCarManuals.com
Problents on the Road
Dead Battery Good Battery
K2504
7. Don’t let the other end touch metal. Connect it to the positive (+)
terminal of the good battery. Use a remote positive (+) terminal if the
vehicle has one.
8. Now connect the black negative (-) cable to the good battery’s negative
(-) terminal.
Don’t let the other end touch anything until the next step.\
The other end
of the negative cable doesn’t go to the dead battery. It goes to a heavy
unpainted metal part on the engine of the vehicle with the
dead battery.
9. Attach the cable at least 18 inches (45 cm) away from the dead battery,
but not near engine parts that move. The electrical connection is just
as
good there, but the chance of sparks getting back to the battery is much
less.
5-6
ProCarManuals.com
Good Battery Dead Battery
K2506
10. Now start the vehicle with the good battery and run the engine for
11. Try to start the vehicle with the dead battery. awhile.
If it
won’t start after a few tries, it probably needs service.
12. Remove the cables in reverse order to prevent electrical shorting.
Take care that they don’t touch each other or any other metal.
REMOVE CABLES IN THIS ORDER
5-7
ProCarManuals.com