Downloaded from www.Manualslib.com manuals search engine r REARAXLE 
1 
When  to  Check and Change  Lubricant: 
Refer  to  the  Maintenance  Schedule  to  determine how often  to check  the 
lubricant  and  when to change it.  See  “Periodic  Maintenance  Inspections” 
in  the  Index. 
How to  Check  Lubricant: 
If the  level  is  below  the  bottom of the filler  plug hole,  you’ll  need  to  add 
some  lubricant.  Add enough  lubricant  to raise  the level  to  the  bottom  of 
What  to  Use: 
~ the filler plug  hole. 
Standard  Differential 
Use  Axle  Lubricant  (GM Part 
No. 1052271)  or SAE 8OW-90 GL-5 gear 
lubricant. 
Limited-Slip  Differential 
To add  lubricant  when the level  is  low,  use Axle  Lubricant (GM Part No. 
1052271)  or SAE 8OW-90 GL-5  gear  lubricant. To completely refill  after 
draining,  add 
4 ounces (1 18 ml) of Limited-Slip  Differential  Lubricant 
Additive  (GM  Part 
No. 1052358).  Then fill to  the  bottom  of the  filler  plug 
hole  with  Axle  Lubricant  (GM Part 
No. 1052271)  or  SAE 8OW-90  GL-5 
~ gear  lubricant. 
ENGINE COOLANT 
The  proper  coolant for your Cadillac  will: 
Give freezing  protection down to  -34°F  (-37’ C) . 
_- Give boiling  protection up  to  262°F  (128°C) . 
0 Protect against rust  and  corrosion. 
__ 0 Help  keep  the  proper  engine  temperature. 
Let the warning lights  work as they should. 
What  to  Use: 
Use  a mixture of one-half  clean water  (preferably  distilled) and one-half 
antifreeze  that  meets 
“GM Specification 1825-M,”  which  won’t damage 
269   
Downloaded from www.Manualslib.com manuals search engine Fuel Pump ................................ Electric  (In  Tank) 
Fuel  Required 
......................... Unleaded  (87 Octane) 
AUTOMMTIC  TMSMISSION 
Trade  Name ............................... Hydra-Matic 4L60 
Fluid  Required 
.............................. DEXRON  IIE@ 
Type 
............... 4-Speed  Automatic  Torque  Converter  Clutch 
Description 
............................. Semi-Floating  Hypoid 
No.  of Differential  Pinions 
................................. 2 
Driving Wheel  Bearing  Type ............................ Roller 
Axle  Ratio  (Fleetwood) 
................................ 2.56:l 
Axle  Ratio  (Fleetwood  Brougham) 
...................... 3.08:l 
Axle  Ratio  (Trailer  Towing Option) 
...................... 3.73:l 
Axle  Ratio  (Optional 
g1/2 Ring  Gear) .................... 3.73:l 
EMISSION  CONTROL  SYSTEMS 
Air  Injection ................ Air Injection  Reaction  Pump  (AIR) 
Exhaust  Gas  Recirculation 
......................... EGR  Valve 
Catalytic  Converter 
........... Dual Bed, Oxidizing  and  Reducing 
Evaporative  Emission Control 
................ Charcoal  Canister 
Crankcase  Emission 
.............. Positive Crankcase  Ventilation 
Electronic  System 
.............................. Closed Loop 
EXHAUST  SYSTEM 
Type ............................... Single with Crossover  Pipe 
Muffler 
.................................. One-Reverse  Flow 
Resonator 
............................. One-Straight  Through 
Exhaust  Pipe 
.................................. Stainless  Steel 
Intermediate  Pipe 
........................... Aluminized  Steel 
Tail  Pipe 
................................... Aluminized  Steel 
-_ ELECTRICAL  SYSTEM 
Voltage ................................................ 12 
Ground 
........................................... Negative 
323