COMFORT ADJUSTMENT
62To comply with Canada Motor Vehicle Safety Standards,
vehicles sold in Canada are provided with a bracket set in the
glovebox, designed for use with the center location shown in
the illustration. If you want to install the bracket set on either
outside anchor, replace the spacer (Part No. 90560-08064)
with one that is 15 mm (0.6 in.) thick. This can be purchased
from your Lexus dealer.
INSTALLATION ON FRONT SEAT
Locking clip
1. Fasten the lap and shoulder belt over the child restraint
system.
2. Keep slack out of the lap portion of the belt.
3. Holding the tab in that position, release the buckle.
4. Install a locking clip near the tab of the lap and shoulder belt.
(See instructions in the next column.)
5. Buckle the belt again. If necessary, slide the seat forward
and remove any slack.
6. Place the shoulder portion of the belt between the vehicle
seatback and the child restraint system.
Locking clip
To install the locking clip, thread the lap and shoulder webbing
through the recesses of the locking clip.
Always remove the locking clip when the child restraint system
is not installed.
Top strap
If your child restraint system requires the use of a top strap,
latch the hook onto the tab of the rear center seat belt and
tighten the top strap.
